LEM3

UMR CNRS 7239
UdL
CNRS
ENSAM

                               
Production scientifique
425 Communications avec ACTes dans un congrès International
TYPE DE PUBLICATION ANNÉE MOT-CLEF
Année : 2017
  • L. IGHIL AMEUR and M. HATTAB, Crack initiation and propagation of clays under indirect tensile strength test by bending related to the initial suction, Proceedings of Advances in Laboratory Testing and Modelling of Soils and Shales (ATMSS) International Workshop, Villars-sur-Ollon - Switzerland, 18-20 January, 2017, Springer Series in Geomechanics and Geoengineering, pp. 173-180. DOI: 10.1007/978-3-319-52773-4_19

  • I. A. MBAREK, A. RUSINEK, E. PETIT, G. SUTTER, G. LIST- The Ductile Fracture of Armor Steel Targets Subjected to Ballistic Impact- 13th Congress of Mechanics - April 11-14, 2017- Meknes, MARROCO 

  • C. Schneider-Maunoury, P. Acquier, L. Weiss, D. Boisselier and P. Laheurte, Additive manufacturing of functionnally graded materials by the CLAD process, ICWAM, Metz, May 17-19 (2017)

Année : 2016
  • I.A.MBAREK, A.RUSINEK, G.LIST, G.SUTTER - Experimental Investigations on the Dynamic Force Measurements During Impact and Perforation using Armor Steel Targets- International Conference on Experimental Mechanics (ICEM17) - Rhodes GREECE 2016.

  • R. MATADI, A. RUSINEK, I.A. MBAREK, P. GERARD - Temperature and Strain rate Effect on the Mechanical behavior of PMMA and PMMA based acrylic tri-bloc Copolymer under Compression: Characterization and Modelling - The 10th Workshop of Dynamic Behaviour of Materials and Its Applications in Industrial Processes - Poznan POLAND 2016.

  • L. IGHIL AMEUR, G. ROBIN, M. HATTAB, Characterization of elastic properties of a remoulded clay under complex triaxial paths using ultrasound propagations, International Conference of the ASCE Engineering Mechanics Institute EMI, Metz - France, 25-27 October, 2016.

  • Q. GAO, M. HATTAB, J-M. FLEUREAU, L. IGHIL AMEUR, Microscale investigation of clay particle orientation on different stress paths, International Conference of the ASCE Engineering Mechanics Institute EMI, Metz - France, 25-27 October, 2016.

  • I. A. MBAREK, A. RUSINEK, G. SUTTER, G. LIST -  Assessment of the Dynamic Force Measurement During Ballistic Impact and Perforation using Armor Steel Targets : Numerical & Experimental Insights - EMI International Conference on ENGINEERING MECHANICS - October 25-27, 2016, Metz, FRANCE

  • M. Novelli, J-J. Fundenberger, P. Bocher, T. Grosdidier, Hardening of austenitic stainless steels by ultrasonic shot peening at cryogenic temperature, International Workshop on Giant Straining Process for Advanced Materials, 2016, Fukuoka, Japon

  • M. Novelli, J-J. Fundenberger, L. Mohrain, N. Nathalie, P. Bocher, T. Grosdidier, Analysis of the deformation induced martensite generated by SMAT ultrasonic shot peening at cryogenic temperature in the 304L stainless steel, 9th Pacific Rim International Conference, 2016, Kyoto, Japon

  • T.CAMALET, M.KAROŃ, R.BERNIER, A.RUSINEK, M.ADAMIAK, effect of severe plastic deformation or shock impact on 6061 aluminum behavior under dynamic compression, 10th Workshop Dynamic Behavior of Materials and its Applications in Industrial Processes, Poland, 24-26 august, 2016.

  • R. MATADI BOUMBIMBA, A. RUSINEK, R. BERNIER, M. COULIBALY, Temperature and strain rate effect on the mechanical behavior of PMMA and PMMA based acrylic tri-bloc copolymer under compression : characterization and modeling, 10th Workshop Dynamic Behaviour of Materials and its Applications in Industrial Processes, Poland, 24-26 august, 2016.

  • I.A.MBAREK, G. LIST, G.SUTTER, A. RUSINEK, R. BERNIER, Experimental investigations on the force measurements during impact and perforation using armor steel targets, Conference: International Conference on Experimental Mechanics (ICEM17), Rhodes GREECE, 3-7 july, 2016.

Année : 2015
  • F. XU, M. POTIER-FERRY. Numerical aspects of pattern formation modeling of film-substrate systems. International Workshop on Pattern Formation in Soft Materials (IWSM 2015), Tianjin, P.R. China, June 1-4, 2015.

  • F. XU, M. POTIER-FERRY. A numerical framework for instability pattern formation modeling of film/substrate systems. 3rd ECCOMAS Young Investigators Conference (YIC) & 6th GACM Colloquium on Computational Mechanics, Aachen, Germany, July 20-23, 2015.

  • A. ARLAZAROV, M. GOUNE, A. HAZOTTE, O. BOUAZIZ, F. KEGEL, Mechanism of ultra-fine microstructure formation during ART-annealing of   a Medium-Mn steel,, PTM 2015, Int. Conf. on Solid-Solid Phase Transformations in Inorganic Materials, 28/6-3/7/2015 , Whistler (Canada)

  • J. GUYON, A. HAZOTTE, E. BOUZY, Estimation des gradients thermiques présents au niveau des cous lors du frittage d'alliages TiAl par Spark Plasma Sintering, Colloque STPMF 2015 : Science et Technologie des Poudres et Matériaux Frittés, April 08-10 2015, Nancy, France, Actes dans Récents Progrès en Génie des Procédés 107 (2015)

  • Z. EL OMARI, H. MANSOUR, M. BEN SAADA, N. GEY, N. MALOUFI, A. HAZOTTE, X. ILTIS, Etude des liens entre la microstructure et les mécanismes d'endommagement par fluage du dioxyde d'uranium, Colloque STPMF 2015 : Science et Technologie des Poudres et Matériaux Frittés, 08-10/4/2015, Nancy (F), Actes dans Récents Progrès en Génie des Procédés 107 (2015)

  • S. MSOLLI, H. BADREDDINE, C. LABERGERE, M. MARTINY, G. ROBIN, M. JRAD, K. SAANOUNI, F. CHOQUART, Sheet metal forming for AA1050-O: experimental investigation and FEM modeling, 9th European Solid Mechanics Conference, Madrid, SPAIN, 6-10 July, 2015.

  • S. MSOLLI, M. MARTINY, M. CARDOSO, L. MOREIRA, S. MERCIER, A. MOLINARI, FEM modeling of the sheet metal forming for 304L stainless steel based on additive tangent Mori-Tanaka homogenization scheme, 9th European Solid Mechanics Conference, Madrid, SPAIN, 6-10 July, 2015.

  • M. Fischer, P. Mille,J. Krier, H. Pelletier, P. Laheurte ; Finite Element Analysis and Characterization of a New Low Modulus Titanium Alloy Used in Two THA Designs ; 21 St congress of the european society of biomechanics, 2015, Prague, Republique Tchèque.

  • M. Fischer, D. Joguet, L. Peltier, P. Laheurte ; In situ titanium alloy elaborated by selective laser melting of Ti and Nb mixed13th World Conference on Titanium,2015, Sand Diego, Californie

  • M. Fischer, L. Peltier, D. Boisselier, P. Acquier, P. Laheurte : Characterization of direct laser deposited low modulus Ti-26Nb alloy on Ti-6Al-4V for biomedical applications, International congress on applications of laser and electro-optics, 2015, Atlanta, USA.

  • D. CHATZIATHANASIOU, Y. CHEMISKY, F. MERAGHNIG. CHATZIGEORGIOUE. PATOORPhenomenological model for phase transformation characteristics of textured shape memory alloys, TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), ed. I. Karaman, R. Arróyave, E. Masad, pp. 211-222.

  • G. CHATZIGEORGIOU, M. HOSSAIN, F. MERAGHNI, P. STEINMANN, Micromechanics modeling of magneto-sensitive polymeric materials during curing, 20th International Conference on Composite Materials, Copenhagen, Denmark 19-24 July 2015, paper 150701-1233.

  • H. MANSOUR, M.A. CRIMP, N. GEY, N. MALOUFI, Characterization of a sub-grain boundary using Accurate Electron Channeling Contrast Imaging, Microscopy and Microanalysis, Vol. 21, Supplement S3 (2015) pp 601-602, Oral presentation, Presidential Scholar Award, M&M Meeting 2015, Portland, OR USA

  • L. Weiss, P. Acquier, L. Germain and E. Fleury, Microstexture of Ti-6Al-4V obtained by direct energy deposition (DED) process, Proceedings of the 13th World Conference on Titanium, San Diego, USA, August 16-20, 2015

  • L. Weiss, J. Zollinger, P. Sallamand, E. Cicala and E. FleuryMicrostructure and property of titanium heterogeneous laser welding, Proceedings of the 13th World Conference on Titanium, San Diego, USA, August 16-20, 2015

  • M. BEN HAJ SLAMA, S. ALLAIN, N. GEY, L. GERMAIN, K. ZHU, Ultrafast Granularization of Lath-like Bainite in FeNiC Alloys During Isothermal Holding, International Conference on Solid-Solid Phase Transformation in Inorganic Materials Canada (PTM 2015)

  • B. Yang, Y. Zhang, Z. Li, G. Qin, C. Esling, X. Zhao, L. Zuo. EBSD characterization of crystallographic orientations and twin interfaces of modulated martensite in epitaxial NiMnGa thin film. in: Skrotzki W, Oertel CG, (Eds.). 17th International Conference on Textures of Materials, vol. 82. 2015.

  • G. MICHEL, V. JEANCLAUDE, and S. STRATULAT, Better careers for transnational European students ? - a case study for French-German diploma alumni, ICEUTE’2015 (Sixth International Conference on EUropean Transnational Education), Burgos , Spain, 15-17 June, 2015, A. Herrero, B. Baruque, J. Sedano, H. Quintian, and E. Corchado, editors, Springer 2015, volume 369 of Advances in Intelligent Systems and Computing, pp. 517–524. 

  • S. BAHI, G. List, G. Sutter, Analysis of adhered contacts and boundary conditions of the secondary shear zone, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.

  • G. List, G. Sutter, S. Bahi (Poster), Friction of titanium alloy at high sliding velocity: study at different scale, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.

  • A. D’ACUNTO, G.LE COZ, A. MOUFKI, D. DUDZINSKI, Dry milling of nanostructured, workpiece surface integrity, XIIth International Conference on High speed machining, (2015), Nanjing, China.

  • N. Sabkhi, M. Nouari, A. Moufki, Modeling of the gear hobbing process: Predictions of cutting forces and cutting-edge effect, Advances in Materials and Processing Technologies conference, (2015), Spain.

  • Wang P, Chalal H, Abed-Meraim F. Efficient solid–shell finite elements for quasi-static and dynamic analyses and their application to sheet metal forming simulation. 18th International Esaform Conference on Material Forming, Graz (Austria), 15-17 April 2015, pp. 344–349.

  • Akpama HK, Ben Bettaieb M, Abed-Meraim F. A comparative study of forming limit diagrams predicted by two different plasticity theories involving vertex effects. 18th International Esaform Conference on Material Forming, Graz (Austria), 15-17 April 2015, pp. 21–26.

  • Chalal H, Abed-Meraim F. Numerical predictions of ductile fracture limits in deep drawing processes. 6 th International Conference on Mechanics and Materials in Design, M2D’15, Ponta Delgada (Portugal), 26-30 July, 2015, CD-ROM 10 pp.

  • Wang P, Chalal H, Abed-Meraim F. Quasi-static and dynamic simulation of sheet metal forming processes using linear and quadratic solid–shell elements. 6th International Conference on Mechanics and Materials in Design, M2D’15, Ponta Delgada (Portugal), 26-30 July, 2015, CD-ROM 10 pp.

  • Akpama HK, Ben Bettaieb M, Abed-Meraim F. Influence of the yield surface curvature on the forming limit diagrams predicted by a crystal plasticity theory. 9th International Conference on Advanced Computational Engineering, ACE-X 2015, Munich (Germany), 29 June – 02 July, 2015, CD-ROM 6 pp.

  • Ben Bettaieb M, Abed-Meraim F. Effect of kinematic hardening on localized necking in substrate-supported metal layers. 9th International Conference on Advanced Computational Engineering, ACE-X 2015, Munich (Germany), 29 June – 02 July, 2015, CD-ROM 6 pp.

  • M. EL KANDAOU, F. SCANDELLA, L. GERMAIN, P. BRANDY, D. DEBREYER, C. GÉRARDIN, E. FLEURY, Microstructure and mechanical properties of Ti-6Al-4V laser welds for airplane floor manufacturing application, Proceedings of the 13th World Titanium Conference, San Diego, USA, August 16-20, 2015

  • J. WEN, N. ALLAIN, E. FLEURY, The effect of hydrogen-deformation interactions on the recrystallization of β-21S titanium alloys,  Proceedings of the 13th World Titanium Conference, San Diego, USA, August 16-20, 2015

  • G. CHASSAING, N. GEY, A.T TIDU, L. FAURE, J. MERIAUX, How the sub−surface microstructure of a Ti6Al4V tribopair evolves due to dry friction at high sliding velocity, Proceeding of The 13th World Conference on Titanium August 16−20, 2015 San Diego, California -CD

  • M. SALIB, J. TEIXEIRA, L. GERMAIN, N. GEY , E. AEBY−GAUTIER, Influence of precipitation at beta/beta grain boundaries, after plastic deformation, on microtexture in a beta metastable titanium alloy, Proceeding of The 13th World Conference on Titanium, August 16−20, 2015 San Diego, California

  • MR. CHINI, L. GERMAIN, N. GEY, S. ANDRIEU, T. DUVAL, Advanced Microtexture Analysis of a Ti10−2−3 product: for a Better Understanding of Local Variations in Mechanical Behavior, Proceeding of The 13th World Conference on Titanium, San Diego, Etats Unis 2015.

  • C. DEBREUX, F.DANOIX, D. BLAVETTE, D. GIBOUIN, F. CHEVALIER, F. CUVILLY, T. SOURMAIL, N. GEY, Coupled EBSD, NanoSIMS and FIB techniques for Atom Probe Tomography specimen preparation, International Conference on Solid-Solid Phase Transformation in Inorganic Materials Canada (PTM 2015)

  • E. BOUCARD, N. GEY, M. BEN HAJ SLAMA, L.GERMAIN, S. COBO, D. BARBIER, Deformation substructure of austenite evaluated by crystallographic reconstruction and its influence on microstructure inheritance in low carbon steels, International Conference on Solid-Solid Phase Transformation in Inorganic Materials Canada (PTM 2015)

  • J. Fadonougbo, J.Y. Suh, S.Y Han, C.H. Shim, G.H. Kim, M.H. Kim, E. FLEURY, Y.W. Cho, Hydrogen-induced Decomposition of Cu-Zr Binary Amorphous Metallic Alloys, ISMANAM (22nd International Symposium on Metastable, Amorphous and Nanostructured Materials), held in Paris, July 12-17, 2015

  • J. Eid, S. Taibi, A. Lefebvre, JE. Dandjnou, J-M. Fleureau, M. Hattab. Craking of clay materials used in raw earth concrete: Impact of reinforcement. Symposium International SEC 2015 International Symposium. France, Marne-La-Vallée, 18 - 19 June. 2015. p. 91

  • X. Wei, L. Ighil Ameur, J-M. Fleureau, M. Hattab.  Some mechanisms of crack formation of clay mixture under free desiccation. Symposium International SEC 2015 International Symposium. France, Marne-La-Vallée, 18 - 19 June. 2015. p. 267

  • Hu Heng, Potier-Ferry, M., Belouettar, S., Damil, N., Multi-scale modeling and simulation on wrinkling phenomena, International Workshop on Pattern Formation in Soft Materials (IWSM 2015), Tianjin, P.R. China, June 1-4, 2015.

  • Potier-Ferry, Michel, Abdelkhalek, S., Kpogan, K., Mathieu, N., Zahrouni, H., Wrinkling phenomena generated by thin sheet fabrication processes, International Workshop on Pattern Formation in Soft Materials (IWSM 2015), Tianjin, P.R. China, June 1-4, 2015.

  • J-M. Fleureau, X. Wei, L. Ighil Ameur, M. Hattab, K. Vanessa Bicalho. Experimental Study of Cracking Mechanisms of Clay during Drying. Proceedings of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Diego Manzanal, Alejo O. Sfriso (Eds). 15–18 November 2015, Buenos Aires, Argentina. pp. 2101-2108.

  • T. Grosdidier,Y. Samih, M. Novelli, /u>Modification of metallic surfaces by duplex treatments involving SPD,  6th International Conference on Mechanics and Materials in Design (M2D), P Delgada, Portugal, 26-30 juillet 2015 , Actes de M2D2015, pp. 315-316

Année : 2014
  • F. XU, S. BELOUETTAR, M. POTIER-FERRY. Pattern formation finite element modeling for thin films on soft substrates. Proceedings of WCCM XI - ECCM V - ECFD VI 2014 Congress, Barcelona, Spain, July 20-25, 2014, 12 pages.

  • C. BERNARDI, A. HAZOTTE, N. SIREDEY-SCHWALLER, T. MAZET, J. LACAZE, Microstructure evolution in an aluminum cladded sheet during vacuum brazing, Materials Science Forum 790-791 (2014) 355-360

  • N. Das, B. Sukumaran, C. Cary, A. Daouadji, Characterizing and Incorporating Particle Morphology in Discrete Element Modeling, IS-Cambridge 2014.

  • N. Das, B. Sukumaran, C. Cary, A. Daouadji, Suitability of the Superpave Gyratory Compactor for the Assessment of Compaction Characteristics of Unbound Materials, IS-Cambridge 2014

  • A. Daouadji, M. Jrad, F. Darve, Instability of granular materials during proportional strain tests, IWBDG, Hong Kong, 2014

  • A. Daouadji, M. Jrad, Microstructure evolution of granular materials during biaxial loading testICEM16, Cambridge UK, 2014

  • S. Belouettar; M. El Hachemi, Yao Koutsawa & D. Ruch, A. Daouadji and E. Daya, Frequency Domain Approach for Homogenization of Viscoelastic Composites, EMI2014, McMaster University, Canada, 2014

  • A. Daouadji, M. Jrad, Evolution of the Microstructure of sands during loading testEMI2014, McMaster University, Canada, 2014

  • Kpeky F, Boudaoud H, Chalal H, Abed-Meraim F, Daya EM. “Vibration modeling of sandwich structures using solid-shell finite elements.” 11th World Congress on Computational Mechanics (WCCM XI) & 5th European Conference on Computational Mechanics (ECCM V), Barcelona, Spain, July 20-25, 2014.

  • Z.-Z. Shi, Y. Zhang, F. Wagner, P.-A. Juan, S. Berbenni, L. Capolungo, J.-S. Lecomte, T. Richeton, Variant selection of twin with low Schmid factors in cross grain boundary twin pairs in a magnesium alloy (ICOTOM 17, Dresden, August 24-29, 2014), IOP Conference Series: Materials Science and Engineering 82 (2015) 012021.

  • Microstructure and mechanical properties of Al-3Fe alloy processed by equal channel angular extrusion, Yu Fuxiao, Liu Fang, Zhao Dazhi, Laszlo S. Toth, 6th International Conference on Nanomaterials by Severe Plastic Deformation IOP Publishing IOP Conf. Series: Materials Science and Engineering 63 (2014) 012079.

  • Contribution of shear deformation to grain refinement and densification of iron powder consolidated by high pressure torsion, Y J Zhao, R Massion, T Grosdidier, L S Toth, 6th International Conference on Nanomaterials by Severe Plastic Deformation IOP Publishing IOP Conf. Series: Materials Science and Engineering 63 (2014) 012032.

  • Microstructure and mechanical properties of continuous equal channel angular pressed Titanium, Dyakonov G S, Gu C F, Toth L S, Valiev R Z, Semenova I P, 6th International Conference on Nanomaterials by Severe Plastic Deformation IOP Publishing IOP Conf. Series: Materials Science and Engineering 63 (2014) 012067.

  • A. HAZOTTE, Challenges for R&D in Material Science, Int. Sci. Pract. Conf. “Science, education and production as leading factors in strategy “Kazakhstan 2050”, 26-27 juin 2014, KSTU, Karaganda (K),  Actes dans le Central Asian Materials Science Journal 1 (2015) 30-32

  • Hartl DJ, Chemisky Y, Meraghni F. Three-dimensional constitutive model considering transformation-induced damage and resulting fatigue failure in shape memory alloys.  SPIE Smart Structures and Materials Nondestructive Evaluation and Health Monitoring: International Society for Optics and Photonics; 2014. p. 905805--8.

  • A. Ayad, N. Rouag and F. Wagner  “Grain growth simulation in an IF steel - Effect of grain boundary mobility”,ICOTOM 17, Dresden (Germany) August 2014,
    appeared in
    IOP Conf. Series: Materials Science and Engineering 82 (2015)

  • D. BOUSCAUD, S. BERVEILLER, R. PESCI, E. PATOOR, A. Morawiec, Local stress analysis in an SMA during stress-induced martensitic transformation by Kossel microdiffraction, European Conference on Residual Stresses (ECRS 9), Troyes, France, 7-10 juillet 2014. Advanced Materials Research Vol. 996 (2014) 45-51

  • M. A. Lebyodkin, I.V. Shashkov, T.A. Lebedkina, V.S. Gornakov, Multiscale analysis of acoustic emission during plastic flow of Al and Mg alloys: from microseconds to minute, Materials Science Forum 783-786 (2014) 204-209.

  • A. Roth, K.E.K. Amouzou, M.A. Lebyodkin, T. Richeton, T.A. Lebedkina and J.S. Lecomte, Three-stage character of strain hardening of α-Ti in tension conditions,  Materials Science Forum 783-786 (2014) 568-573.

  • T.A. Lebedkina, N.P. Kobelev, M.A. Lebyodkin,   Onset of the Portevin-Le Chatelier effect: role of synchronization of dislocations, Materials Science Forum 783-786 (2014) 198-203.

  • Y. Samih, M. Novelli, T. Thiriet, B. Bolle, N. Allain, J.-J. Fundenberger, G. Marcos, T. Czerwiec, T. GrosdidierPlastic deformation to enhance plasma-assisted nitriding: On surface contamination induced by Surface Mechanical Attrition Treatment, 6th Int. Conf. Nanomater. Sev. Plast. Deform. Nanospd6 Metz (2014) 012020.

  • M. Nouari, S. Atlati, B. Haddag, A. Moufki, On the correlation between the contact nature at the tool-chip interface and the built-up-edge formation process when machining the aeronautical aluminum alloy A2024-T351, Advances in Materials & Processing Technology Conference, AMPT (2014), Dubai, United Arab Emirates.

  • Soho K, Abed-Meraim F, Lemoine X, Zahrouni H. Multiscale finite element simulation of forming processes based on crystal plasticity. 17th International Esaform Conference on Material Forming, Espoo (Finland), 7-9 May 2014, pp. 545–552.

  • T. Hammad, M. Hattab, J-M. Fleureau. Microstructural change identification in the Mix-Kaolin/Montmorillonite Clays at the Ultimate State. International Symposium on Geomechanics from Micro to Macro. Soga et al. (Eds), 2015 Taylor and Francis Group. September 1 – 3 , (2014). Cambridge, UK. pp 1279-1283.

  • R. PIQUARD, A. GILBIN, M. FONTAINE, A. D’ACUNTO, S. THIBAUD, D. DUDZINSKI, Study of elementary micro-cutting in hardened tool steel”, 11th International Conference on High Speed Machining, Septembre 2014, Prague (Tchéquie)

  • R.W. Wheeler, D.J. Hartl, Y. Chemisky, D.C. Lagoudas, Characterization and Modeling of Thermo-Mechanical Fatigue in Equiatomic NiTi Actuators, ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems

  • D.J. Hartl, Y. Chemisky, F. Meraghni, Three-dimensional constitutive model considering transformation-induced damage and resulting fatigue failure in shape memory alloys, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring,2014

  • B. ESMAEILLOU, J. FITOUSSI, F. MERAGHNI, A. TCHARKHTCHI. Micro-mechanisms of fatigue in short glass fiber reinforced polyamide 66: A multi-scale experimental analysis, 16th Eur. Conf. Compos. Mater. ECCM-16, 22-26 June, 2014, Seville–Spain. 

  • Numerical investigation of cut-edge effect using Gurson-Tvergaard-Needleman mode, By: Lemoine, Xavier; Balan, Tudor; Habraken, Anne-Marie,Edited by: Ishikawa, T; Mori, KI, Conference: 11th International Conference on Technology of Plasticity (ICTP) Location: Nagoya, JAPAN Date: OCT 19-24, 201, 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014  Book Series: Procedia Engineering  Volume: 81  Pages: 724-729  Published: 2014

Année : 2013
  • B. Sukumaran, J. Wasserman, A. Daouadji, Influence of granular particle characteristics on flow rate and fabric, ASCE International Workshop on Computing in Civil Engineering (IWCCE), 2013.

  • F. XU, S. BELOUETTAR, M. POTIER-FERRY, H. HU. A finite element model for wrinkling analysis of thin films on compliant substrates. 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh, North Carolina, U.S.A., July 22-25, 2013.

  • F. XU, S. BELOUETTAR, M. POTIER-FERRY, H. HU. Surface wrinkling of a stiff thin film on a functionally graded substrate. International Conference on Science and Technology of Heterogeneous Materials and Structures (ICSTHMS 2013), Wuhan, P.R. China, October 11-13, 2013.

  • I.V. Shashkov, M.A. Lebyodkin (Lebedkin), V. S. Gornakov, Statistical and multifractal properties of Barkhausen jumps in exchange-coupled  antiferromagnetic/ferromagnetic bilayers, Intern. Conf EASTMAG 2013, Trends in MAGnetism, 15-21 Sept. 2013, Vladivostok, Russia, Solid State Phenomena 215 (2014) 35-40.

  • A. Daouadji, M. Jrad, Diffuse Instability during proportional Strain tests, EMI - ASCE Conference, Northwestern University, 2013

  • A. Daouadji, M. Jrad, B. Sukumaran, F. Darve, The role of the density on the diffuse instability of cohesionless granular materials,US-France Workshop (Aussois), 2013

  • A. Daouadji, M. Jrad, Undrained and drained instabilities in granular materials, International Conference on Science and Technology of Heterogeneous Materials and Structures, Wuhan University, 2013.

  • M. Bouchaour, N. Maloufi, G. Orsal, S. Gautier, A. Ould-Abbas, N-E. Chabane Sari, A. Ougazzaden, Effect of pressure growth on MOVPE BGaN films, 3rd International Conf. of Engineering Against Failure, ICEAF 2013; 26 June 26-28 Kos Greece 2013, pp 947-952

  • T. ARA, C. BOUBY, T. BEN ZINEB, S. BERVEILLER, E. PATOOR, Development of a 2-D interfacial dynamic model for detwinning in HTSMAS, Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, USA, 16-18 septembre 2013, Volume 2, 2013, Article number V002T02A003

  • E.J. Petit, N. Becker, Y. Grosbety, J. Gilgert and Z. Azari, Mechanical resistance and fatigue toughness of spot welded and hot-dip galvanized AISI410 martensite steel sheets for structural applications for the automotive industry,
    Proceed. 9th. Int. Conf on zinc and Zinc alloy coated steel sheet, 2d Asia-Pacific galvanizing conference ; sept 23-27, 2013, Beijing. (Galvatech 2013)  pp. 227-232.

  • Z. Leng, A. Alankar, D. Field, N. Allain-Bonasso and F. Wagner   “Dislocation density based crystal plasticity finite element model of polycrystal with grain boundary effect”, 2nd World Congress on Integrated Computational Materials, Procedings, Ed. Mei Li et al, Wiley, p.271-278, (2013)

  • Liang Zuo, Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Extensions of electron diffraction based techniques in crystallographic characterization, 5th International Conference on Recrystallization & Grain Growth (ReXGG), Mater. Sci. Forum 753 (2013) 11-16.

  • M Soltani, B Asgarian and F Mohri  Finite element method for stability analysis of tapered thin-walled beams under lateral loads. World Cong on Advances in Structural Eng and Mechs (ASEM 2013), 09/2013, Jeju, Korea

  • Pipard JM, Balan T, Abed-Meraim F, Lemoine X. Physically-motivated elasto-visco-plastic model for the large strain-rate behavior of steels. 16th International Esaform Conference on Material Forming, Aveiro (Portugal), 22-24 April 2013, pp. 1164–1173.

  • M.Y. Kim, J. Grancier, E. FLEURY, J.Y. Suh,  Y.K. Lee, High temperature tensile and creep behavior of T92/Super304H dissimilar Weld Joint, PRICM8 (the 8th Pacific Rim International Conference on Materials) held August 4-9th, 2013

  • Gurson-type Elastic-Plastic Damage Model Based on Strain-Rate Plastic Potential, By: Balan, Tudor; Cazacu, Oana Edited by: Yoon, JW; Stoughton, TB; Rolfe, B; et al., Conference: 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET) Location: Melbourne, AUSTRALIA Date: JAN 06-10, 2014, Sponsor(s): AutoForm; ESI; Korea Inst Mat Sci; Ford; JSTAMP; Space Solut; LG Elect; Deakin Univ; Univ Adelaide; Swinburne UnivTechno, NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS  Book Series: AIP Conference Proceedings  Volume: 1567  Pages: 464-467  Published: 2013

Année : 2012
  • Dmitry Orlov, Rimma Lapovok, Laszlo S. Toth, Ilana B. Timokhina, Peter D. Hodgson, Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel, Debashish Bhattacharjee, Arunansu Haldar, THERMEC2011, Aug. 1-5, (2011), Quebec, Canada, , Materials Science Forum, 706-709 (2012) 2788-2793.

  • J. LACAZE, J. EIKEN, A. HAZOTTE, “Resampling technique applied to statistics of microsegregation characterization“, 13ème Conf. Int. “Modeling of Casting, Welding and Advanced Solidification Processes“, 17-22 juin 2012, Schladming (A), IOP Conf. Series: Materials Science and Engineering 33 (2012) 012062

  • B. GOUBAULT DE BRUGIÈRE, F. MARION, M. FENDLER, V. MANDRILLON, A. HAZOTTE, M. VOLPERT, H. RIBOT - “Electro-mechanical studies of micro tube insertion into Al-Cu pads for 10μm pitch interconnection technology and 3D applications“, Materials for Advanced Metallization (MAM2012), Grenoble 11-14 mars 2012, à paraître dans Microelectronic Engineering

  • P. Forquin, L. Sallier, S. Bakowski. A Testing Technique to Characterise the Shear Behaviour of Concrete at High Strain-Rates, SEM2012, Costa Mesa, USA

  • L. Sallier, P. Forquin. Influence of the Confined Behaviour and the Tensile Strength of Concrete Slabs Under Projectile-Impact, SEM2012, Costa Mesa, USA

  • P. Forquin. An optical correlation technique for characterizing the crack velocity in concrete, DYMAT2012, Freiburg, Germany.

  • L. Sallier, P. Forquin. On the use of Hillerborg regularization method to model the softening behaviour of concrete subjected to dynamic tensile loading, DYMAT2012, Freiburg, Germany.

  • J.-L. Zinszner, P. Forquin, G. Rossiquet. Design of an experimental configuration for studying the dynamic fragmentation of ceramics under impact, DYMAT2012, Freiburg, Germany.

  • F.Mohri, N. Damil, M. Potier-Ferry: Torsion Approximation effect on non linear behaviour of thin-walled elements, paper 36, Proceedings of the Eleventh International Conf on Comp Structures Tech, Civil-Comp Press, 2012.

  • A. Daouadji, M. Jrad, S. Belouettar, B. Sukumaran, F., Darve Diffuse failure in granular media: influence of the loading path, ICTAM 2012 (SM06-020), Beijing, China, 2012.

  • Kumpel, C., Panko, M., McGarvey, K., Hurt, C., Melici, A., Rossi, S., Yurick,C., Daouadji, A., and Sukumaran, B. (2012), “Compaction characteristics of the subbase material using the Superpave Gyratory Compactor,” Proceedings of the TSO Workshop, 2012.

  • F. XU, H. HU, S. BELOUETTAR, M. POTIER-FERRY. Analysis of reduced coupling and prolonged coupling approach via Arlequin method on instability pattern. Proceedings of the 6th International Conference on Coupled Instabilities in Metal Structures (CIMS 2012), Glasgow, UK, December 3-5, 2012, ed. J. Loughlan, pp. 87-94.

  • A. Ayad, N. Allain-Bonasso, N. Rouag and F. Wagner, “Grain Orientation Spread values in IF steels after plastic deformation and recrystallization” ICOTOM 16, Déc. 2011, paru dans Materials Science Forum Vol.702-703, p. 269-272, (2012)

  • P. DUFILIE, P. VENTURA, F. HECHT, "COM parameters for Thick Metal and Partially Buried Electrodes Extracted from a Mixed FEM/BEM Numerical Model", 2012 IEEE Ultrasonics Symposium.

  • Dmitry Orlov, Rimma Lapovok, Laszlo S. Toth, Ilana B. Timokhina, Peter D. Hodgson, Debashish Bhattacharjee, Arunansu Haldar, Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel, THERMEC2011, Aug. 1-5, 2011, Quebec, Canada, Materials Science Forum, 706-709 (2012) 2788-2793.

  • L. Weiss, A. Tazibt, A. Tidu and M. Aillerie, Optical properties of water under high pressure, Procceedings EOSAM 2012, September 25-28, Aberdeen, Scotland, ISBN 978-3-9815022-4-4

  • J. FAVRE, A. CHIBA, Y. KOIZUMI, D. FABREGUE, E. MAIRE, Dynamic recrystallization of biomedical Co-Cr-W-Ni (L-605) alloy, Materials Science Forum  706-709  PP. 472 - 477 (2012)

  • J. FAVRE, Y. KOIZUMI, A. CHIBA, D. FABREGUE, E. MAIRE, Recrystallization of L-605 cobalt superalloy during hot-working process, TMS Annual Meeting  PP. 257 - 264 (2012)

  • Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel, A. Fillon, X. Sauvage, A. Pougis, O. Bouaziz, D. Barbier, R. Arruffat, L.S. Toth, UFG Symposium TMS2012, published in J. Mat. Sci., 47 (2012) 7939-7945.

  • S. BERBENNI, B. PALIWAL, M. CHERKAOUI, Micromechanics-based modeling of shear-coupled migration in bicrystals.  European Solids Mechanics Conference EUROMECH – ESMC 12, July 9-13, 2012, Graz, Austria 

  • P.A. JUAN, L. CAPOLUNGO, S. BERBENNI, An elasto-plastic micromechanical method for twin driven plasticity.TMS 2012, March 11-15, 2012, Orlando, USA; publié dans: Magnesium Technology, pp. 83-86, 2012

  • E.J. Petit, Y. Grosbety, S. Aden-Ali, L. Schmitt, J. Gilgert and Z. Azari,   Fatigue toughness of galvanized high strength steels for structural applications for the automotive industry,
    Proceed. 23rd. Int. Galvanizing Conf., 11-13 june, 2012, Paris. (Intergalva 2012)

  • Zongbin Li, Yudong Zhang, Claude Esling, Hao Yang, Jijie Wang, Changshu He, Xiang Zhao, Liang Zuo. "Application of EBSD to the crystallographic investigation on Ni-Mn-Ga alloys, THERMEC, Mater. Sci. Forum 706-709 (2012) 1879-1884.

  • Yudong Zhang, Zongbin Li, Claude Esling, Xiang Zhao, Liang Zuo, Calculation methods to determine crystallographic elements based on electron diffraction orientation measurements by SEM/EBSD or TEM, Mater. Sci. Forum 706-709 (2012) 2674-2679.

  • Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, EBSD-based crystallographic study on a Ni-Mn-Ga alloy with incommensurate 7M structure, ICOTOM16, Mater. Sci. Forum 702-703 (2012) 530-535.

  • Yudong Zhang, Shiying Wang, Claude Esling, Xiang Zhao, Liang Zuo, Determination of crystallographic elements (dislocation and surface plane) from automated TEM orientation determination, ICOTOM16, Mater. Sci. Forum 702-703 (2012) 866-871.

  • C. Schuman, L. Bao, J. S. Lecomte, M. J. Philippe, Y. D. Zhang, X. Zhao, L. Zuo, J. M. Raulot, C. Esling, New Model for Twin-variant Selection in Hexagonal Alloys, ICOTOM16, Mater. Sci. Forum, 702-703 (2012) 229-232.

  • K Attipou, H Hu, F Mohri, M Potier-Ferry, S Belouettar: Analysis of buckling and wrinkling of plate under thermo-mechanical loading using a Fourier-related multi-scale approach. CIMS 2012, Glasgow, 2012

  • Mansouri LZ, Chalal H, Abed-Meraim F, Balan T. Plastic instability based on bifurcation analysis: Effect of hardening and Gurson damage parameters on strain localization. 15th International Esaform Conference on Material Forming, Erlangen (Germany), 14-16 March 2012, pp. 35–40.

  • Chalal H, Salahouelhadj A, Abed-Meraim F. Evaluation of a new solid–shell finite element on the simulation of sheet metal forming processes. 14thMetal Forming Conference, Krakow (Poland), 16-19 September 2012, pp. 315–318.

  • Franz G, Abed-Meraim F, Ben Zineb T. Effect of microstructural and physical mechanisms on mechanical properties of single-phase steels. International Conference on Advances in Materials Science and Engineering (AMSE2012), Bangkok (Thailand), 27-28 September 2012, pp. 346-–350.

  • M. Hattab. The induced anisotropy analyses in clayey materials. Advances in Multiphysical testing of Soils and Shales - ISSMGE TC-101- Multiphysical testing of Soils and Shales, SSGG, Laloui and Ferrari Eds/Springer (2013) - workshop 3-5 september, 2012, Lausanne.pp. 187-193

  • H. CHALAL, S.-G. Racz, T. Balan, Investigation of thick sheet AHSS springback in combined bending under tension, 15th International Esaform Conference on Material Forming, Erlangen (Germany), 14-16 March, 2012, pp. 791-796.

  • G. LE COZ,  A. DEVILLEZ, D. DUDZINSKI, S. AUGER, Dry milling of an aerospace aluminium alloy, 9th International Conference on High speed machining (2012) San Sebastian, Spain

  • G. ROBERT, F. MERAGHNI, N. SAINTIER, J. FITOUSSI, M.F ARIF., Damage characterization and mechanical consequences in short glass fibers reinforced polyamides. Digimatum 2012 (Leuven) 

  • M.F. ARIF, F. MERAGHNI, N. SAINTIER, J. FITOUSSI, G. ROBERT. Experimental Fatigue Damage Evaluation of Short Glass Fiber Reinforced Polyamide Composites. ESCM8 8th Eur. Solid Mechanics Conference, 9-13 July 2012, Graz – Austria.

  • Analysis of limit strains in metallic sheetsdos Santos Freitas, Maria Carolina; Moreira, Luciano Pessanha; Makkouk, Rabih; Ferron,Gerard,REM-REVISTA ESCOLA DE MINAS  Volume: 65  Issue: 4  Pages: 523-530  Published: OCT-DEC 2012

Année : 2011
  • D. BOUSCAUD, R. PESCI, S. BERVEILLER, E. PATOOR, Stress analysis by Kossel microdiffraction on a nickel-based single crystal superalloy during an in situ tensile test - Comparison with classical X-Ray diffraction, 8th European Conference on Residual Stresses (ECRS8), Riva del Garda (Italy), Materials Science Forum 681, 2011, 1-6.

  • R. OUAHAB, R. PESCI, S. BERVEILLER, E. PATOOR, Influence of temperature on stress distribution in bainitic steels - Application to 16MND5-A508 pressure vessel steel, 8th European Conference on Residual Stresses (ECRS8), Riva del Garda (Italy), Materials Science Forum 681, 2011, 243-248.

  • B. GOUBAULT DE BRUGIERE, F. MARION, M. FENDLER, V. MANDRILLON, A. HAZOTTE, M. VOLPERT, H. RIBOT, “A 10µm pitch interconnections technology using micro tubes insertion into AlCu for 3D applications“,61th Electronic Components and Technology Conference (ECTC 2011), 31 mai-3 juin 2011, Lake Buena Vista (USA)

  • K. Douvon, M. Jrad, E.M. Daya and A. Daouadji, A 3D discret lattice spring model for quasi static and dynamic response in granular media, DEMEASS IV conference, Design, Modelling, and Experiments of Advanced Structures and Systems, 27-30 March 2011, Urspelt, Luxembourg

  • ‘‘Numerical model based on SPH method to simulate Friction Stir Welding’’, A. Timesli, H. Zahrouni, B. Braikat, A. Moufki, H. Lahmam,10ème Congrès de Mécanique, Meknès 19-22 avril 2011 (Maroc).

  • ‘‘A numerical computation of thermomechanicl process of Friction Stir Welding’’,A. Guedoiri, A. Moufki, V. Favier, H. Zahrouni, 10ème Congrès de Mécanique, Meknès 19-22 avril 2011 (Maroc).

  • A. MOUFKI, G. LE COZ, D. DUDZINSKI, An analytical thermomechanical modelling of peripheral milling process using a predictive machining theory, 13th CIRP Conference On Modeling Of Machining Operation, Sintra, Portugal, 12-13 May 2011.

  • A. D'ACUNTO, C. LESCALIER, A. MOUFKI, D. DUDZINSKI, Cutting forces prediction in plunge milling with a modeling taking into account of the active cutting edge local contribution, 9th International Conference on Advanced Manufacturing Systems and Technology , Mali Losinj, Croatia, June 16-17, 2011.

  • P. Forquin, L. Sallier, B. Erzar and J. Mazars. Modeling of the softening behaviour of concrete subjected to dynamic tensile loading in spalling tests. CFRAC 2011, Barcelone, France

  • P. Forquin. Influence of strain-rate and confining pressure on the shear strength of concrete. SEM 2011, Uncasville, Connecticut, USA

  • P. Forquin., R. Cheriguène. A rocking spalling test to characterize the crack velocity in concrete. SEM 2011, Uncasville, Connecticut, USA

  • F. Pierron, P. Forquin. Ultra high speed full-field strain measurements on spalling tests on concrete materials. SEM 2011, Uncasville, Connecticut, USA

  • M. Rossi, R. Cheriguene, F. Pierron, P. Forquin. Performance Assessment of Strain Measurement with an Ultra High Speed Camera. SEM 2011, Uncasville, Connecticut, USA

  • P. Forquin. Influence of free water and strain-rate on the shear behaiour of concrete. PROTECT 2011 (Performance, Protection & Strengthening of Structures under Extreme Loading), Lugano, Suisse

  • B. Erzar, P. Forquin. Free water influence on the dynamic tensile behaviour of concrete. PROTECT 2011 (Performance, Protection & Strengthening of Structures under Extreme Loading), Lugano, Suisse

  • A.ARLAZAROV, O.BOUAZIZ, M.GOUNÉ, A. HAZOTTE, F. KEGEL - “Effect of intercritical annealing time on microstructure and mechanical behavior of advanced medium Mn steels“, Thermec 2011, 1-5 août 2011, Québec (CA), Mater. Sci. Forum 706-709 (2012) 2693-2698

  • Das, N., Thomas, S., Kopmann, J., Donovan, C., Hurt, C., Daouadji, A., Ashmawy, A.K., and Sukumaran, B., “Using Surface Texture Measurements and Other Characteristics of Particle Morphology in Discrete Element Modeling, ASCE Engineering Mechanics Conference, Boston, MA, 2011.

  • Das, N., Thomas, S., Kopmann, J., Donovan, C., Hurt, C., Daouadji, A., Ashmawy, A.K., and Sukumaran, B., “Modeling granular particle shape using Discrete Elements,” Proceedings of the GeoFrontiers Conference, Dallas, TX, 2011.

  • A. Daouadji, C. Dano and W. Hu, Instability and crushing of granular materials, 6th International Conference on Dam Engineering, DAM11, Lisbon, Portugal, 2011.

  • G. ROBIN, F. VANDER MEULEN, J. FORTINEAU, G. FEUILLARD, Non linear parametric imaging using an ultrasonic focused transducer, Ultrasonics Symposium (IUS), Orlando, FL, U.S.A., 18-21 October, 2011, ed IEEE, pp. 1080-1083.

  • F. LEFEBVRE, D. BOUSCAUD et al., External reference samples for residual stress analysis by X-ray diffraction, 8th European Conference on Residual Stresses (ECRS8), Riva del Garda (Italy), Materials Science Forum 681, 2011, 215-222.

  • N. Gey, P. Bocher, E. Uta, M. Humbert, J. Gilgert, How texture and microtexture influence dwell fatigue lifetime in forged IMI834 Titanium alloys, International Conference Titanium-2011 China - Proceedings to be published

  • W. Elmay, T. Gloriant, F. Prima, B. Bolle, N. Gey, E.Patoor, P. Laheurte, A thermomechanical treatment to improve superelasticity and low modulus of Ti-Nb alloys for biomedical applications, International Conference Titanium-2011 China - Proceedings to be published

  • C. Buirette; J Huez; N. Gey; E. Andrieu, G.Khelifati, Study of microstructural factors governing damage processes in the Ti-6Al-4V Titanium alloy after Charpy tests, International Conference Titanium-2011 China - Proceedings to be published

  • J. Teixeira, L. Germain, E. Lamielle, N. Gey, E. Aeby-Gautier, B. Appolaire, Microstructure and microtexture associated to heterogeneous precipitation of the α phase on β/β boundaries in Ti17 alloy: influence of first stages of αGB formation International Conference Titanium-2011 China -Proceedings of the 12th World Conference on Titanium. Beijing, pp 464–467

  • L. Germain, P. Blaineau, N. Gey, M. Humbert, Current Approaches for Reconstructing the Parent Microtexture from that Inherited by Phase Transformation, International Conference ICOTOM 16 - INDE 2011, Materials Science Forum Vols. 702-703 (2012) pp 846-849

  • M. Humbert, P. Blaineau, L. Germain, N. Gey, Determination of the Orientation Relation from Variants Inherited by Phase Transformation, International Conference ICOTOM 16 - INDE 2011, Materials Science Forum Vols. 702-703 (2012) pp 862-865

  • V. TAUPIN, S. BERBENNI, C. FRESSENGEAS, O. BOUAZIZ, On Particle Size Effects: an Internal Length Mean Field approach using Field Dislocation Mechanics simulations TMS 2011 San Diego, February 27 - March 3, 2011,  San Diego, Etats-Unis.

  • Jing Bai, Jean-Marc Raulot, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Effects of Co addition on crystal structure, thermal stability and magnetic properties of Ni-Mn-Ga ferromagnetic shape memory alloys from first-principles calculations,THERMEC2011, Mater. Sci. Forum  706-709 (2012) 1990-1995.

  • T. GROSDIDIER, Y. SAMIH, N. ALLAIN-BONASSO, B. BOLLE, Z. X. ZOU, Y. QIN, S. Z. HAO, C. DONG, Grain Refinement and Hardening Induced by Heavy Deformation using Low Energy High Current Pulsed Electron Beam Surface Treatment, 6th Int. Conf. Nanomater. Sev. Plast. Deform. Nanospd5 - Nanjing (2011), 499–504.

  • Y. SAMIH, B. BOLLE, N. ALAIN-BONASSO, S. Z. HAO, C. DONG, T. GROSDIDIER, Microstructure modifications induced by Pulsed Electron Beam in Steels, Adv. Mater. Sci. Technol.  - Dalian (2011) 1315–1318.

  • Salahouelhadj A, Abed-Meraim F, Balan T, Chalal H. On the implementation of the continuum shell finite element SHB8PS and application to sheet forming simulation. 14th International Esaform Conference on Material Forming, Belfast (Ireland), 27-29 Avril 2011, pp. 1203–1208.

  • Mansouri LZ, Chalal H, Abed-Meraim F, Balan T. Prediction of strain localization during sheet metal forming using bifurcation analysis and Gurson-type damage. COMPLAS’XI, Barcelona (Spain), 7-9 Septembre 2011, CD-ROM 6 pp.

  • Salahouelhadj A, Chalal H, Abed-Meraim F, Balan T. Elastic-plastic analyses using the solid-shell finite element SHB8PS and evaluation on sheet forming applications. COMPLAS’XI, Barcelona (Spain), 7-9 Septembre 2011, CD-ROM 6 pp.

  • G. GU, R. PESCI, E. BECKER, L. LANGLOIS, R. BIGOT, Microstructure evolution and material flow of steel in semi-solid forming process, Steel Res. Inter., Special Edition (2011) 768-773

  • Flow Curve Determination at Large Plastic Strain Levels: Limitations of the Membrane Theory in the Analysis of the Hydraulic Bulge TestLemoine, X.; Iancu, A.; Ferron, G. Edited by: Menary, G Conference: 14th International Conference on Material Forming Esaform Location: Queens Univ, Belfast, NORTH IRELAND Date: APR 27-29, 2011, 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS  Book Series: AIP Conference Proceedings  Volume: 1353  Pages: 1411-1416  Published: 2011

  • Flow Curve Determination at Large Plastic Strain Levels to Accurately Constitutive Equations of AHSS in Forming Simulation, By: Lemoine, X.; Sriram, S.; Kergen, R.,  Edited by: Menary, Conference: 14th International Conference on Material Forming Esaform Location: Queens Univ, Belfast, NORTH IRELAND Date: APR 27-29, 201, 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS  Book Series: AIP Conference Proceedings  Volume: 1353  Pages: 1417-1422  Published: 2011

Année : 2010
  • Y. Bougherira, D. Entemeyer, C. Fressengeas, N.P. Kobelev, T.A. Lebedkina, M.A. Lebyodkin, The intermittency of plasticity in an Al3%Mg alloy, ICSMA-16, Dresden, August 2009, Journal of Physics: Conference Series" (JPCS), 240 (2010) 012009.

  • T. Lebedkina, M. Lebyodkin, J.-Ph. Chateau, A. Jacques, S. Allain, Kinematics of deformation bands in an austenitic FeMnC TWIP steel, ICSMA-16, Dresden, August 2009, Journal of Physics: Conference Series" (JPCS), 240 (2010) 012020.

  • G. ALTMEYER, F. ABED-MERAIM, T. BALAN. Investigation of some localization criteria and their relevance to the prediction of forming limit diagrams. 13th Metalforming Conference, 19-22 September (Japan) 2010.

  • T. CARVALHO RESENDE, T. BALAN, F. ABED-MERAIM, S. BOUVIER, SS. SABLIN. Application of a dislocation based model for aluminum alloys on Cross Die stamping tests. Numiform Conference, 13-17 June (Pohang - Korea) 2010.

  • H-J.Chang, N.M. Cordero, V. Taupin, S.Berbenni, M. Fivel, S.Forest, Analysis of GND distribution around an inclusion obtained by Field Dislocation Mechanics, Strain Gradient Plasticity and Dislocation Dynamics. IV European Conference on Computational Mechanics (ECCM 2010), Palais des Congrès, Paris, France, May 16-21, 2010.

  • M. Hattab, T. Hammad, J-M. Fleureau, Compressibility behaviour of soft clay sediments, GeoShanghai 2010. Shanghai 3-5 June 2010.

  • M. Hattab, Z.Y Yin, P.Y. Hicher. A multiscale study of the behaviour of sensitive marine sediment, ASCE EMI2010. Los Angeles, August 8-11 2010.

  • H. Laribou, C. Fressengeas, D. Entemeyer, V. Jeanclaude, A. Tazibt, Surface damage by impact of a nitrogen jet under high pressure and low temperature, TMS (The Minerals, Metals & Materials Society) Annual Meeting, Febr. 14-18, 2010, Seattle (USA).

  • H. Laribou, C. Fressengeas, D. Entemeyer, V. Jeanclaude, A. Tazibt, Surface treatment by impact of a nitrogen jet under high pressure and low temperature, Advances in Materials and Processes Technologies Int. Conf. (AMPT 2010), Paris, 24-27 October 2010.

  • G. RACZ, S. KHAN, H. CHALAL, F. ABED-MERAIM, T. BALAN. Prediction of springback after draw-bend test using several material models. AMPT2010, 24-27 October (Paris) 2010.

  • V. Taupin, S. Berbenni, C. Fressengeas and O. Bouaziz, On Particle Size Effects: an Internal Length Mean Field Approach using Field Dislocation Mechanics, IVth European Conf. on Comput. Mechanics-ECCM IV, Solids, Structures and Coupled Problems in Engineering, ECCOMAS, Paris, May 16-21, 2010.

  • V.D. TRINH, F. ABED-MERAIM, A. COMBESCURE. Formulation of new quadratic solid-shell elements and their evaluation on popular benchmark problems. 9th WCCM Conference, 19-23 July (Sydney) 2010.

  • P. BLAINEAU, L. GERMAIN, M. HUMBERT, N. GEY, A new approach to calculate the gamma orientation maps in steels’, 3rd International Conference on Texture and Anisotropy of Polycrystals - ITAP-3, Septembre 2009, Göttingen, Germany, in Solid State Phenomena Vol. 160, 203-210 (2010).

  • W. Elmay, P. Laheurte, A. Eberhardt, B. Bolle, T. Gloriant, E. Patoor, F. Prima, D. Laille, P. Castany, M. Wary, Stability and elastic properties of beta Ti alloys for biomedical application designed with electronic parameters, 14th International Conference on Experimental Mechanics (ICEM 14), Poitiers, France, July 4-9, 2010, EPJ Web of Conferences 6, 29002 (2010), DOI : 10.1051/epjconf/20100629002.

  • A. SANKARAN, E. BOUZY, M. BARNETT, A. HAZOTTE - “Grain boundary-dependent selection criteria for nucleation of gamma-massive grains in TiAl-based alloy“ – 7th Pacific Rim International Conference on Advanced Materials and Processing PRICM7, 1-5 august 2010, Cairns (Australia) - Materials Science Forum 654-656 (2010) 2338-2341.

  • J. LACAZE, A. HAZOTTE, J. EIKEN - “Statistical characterization of microsegregation studied on Mg-Al phase field simulations“ – 8th Int. Conf. On Magnesium Alloys and their Applications (Magnesium 2009), 26-29 octobre 2009, Weimar (D) - éd. K.U. Kainer, DGM/Wiley-VCH (2010) pp. 398-404.

  • E. Becker, G. Gu, L. Langlois, R. Pesci, R. Bigot, Effects Of Thermal Exchange On Material Flow During Steel Thixoextrusion Process, Advances in Materials and Processing Technologies 2010 (AMPT 2010), Paris (France).

  • B. Piotrowski, T. Ben Zineb, D. Lagoudas, E. Patoor, Modeling of precipitation effects on the thermomechanical behaviour of NiTi SMA, Y. Chemisky, Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, Philadelphia, USA.

  • B. Piotrowski, E. Patoor, T. Ben Zineb, Experimental and numerical analysis of recovery stress in Ni47Ti44Nb9 shape memory alloy: Application to tightening,Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, Philadelphia, USA.

  • Y. Chemisky, A. Duval, B.Piotrowski, T. Ben Zineb, and E. Patoor, Numerical tool for Shape Memory Alloys structures simulations including twinning effects, Proceedings of ESOMAT 2009, published by EDP Sciences, 2010, DOI:10.1051/esomat/200908003 (on line 17/12/2010).

  • A. Duval, Y. Chemisky, B.Piotrowski, T. Ben Zineb, and E. Patoor, Micromechanical inspired SMA constitutive models for structural analysis by finite element method, Symposium on Smart Structural Systems Technologies, Porto, Portugal, 08-09 April 2010.

  • B. Piotrowski, T. Ben Zineb, E. Patoor, A. Eberhardt, Physic Procedia, Experimental and numerical analysis of recovery stress in Ni47Ti44Nb9 shape memory alloys: application to tightening, Proceeding of symposium S: Shape memory materials for smart systems III, EMRS, Strasbourg, 2010.

  • S. Kannan, C. Giraud-Audine, E. Patoor, Laguerre Model based Adaptive Control of Antagonistic Shape Memory Alloy (SMA) Actuator, Active and Passive Smart Structures and Integrated Systems 2010, Proc. of SPIE, Vol. 7643, DOI:10.1117/12.847430.

  • M. Bilasse, I. Charpentier, E. M. Daya, A generic approach for the solution of nonlinear residual equations: application to vibrations of viscoelastic structures, IV European Conference on Computational Mechanics, ECCM 2010, Paris.

  • El Khaldi, E.M. Daya, I. Charpentier, Optimal control with a complex nonlinear eigenvalue solver for viscoelastic law identification, IV European Conference on Computational Mechanics ECCM 2010, Paris.

  • K. Lampoh, E.M. Daya, I. Charpentier, Sensitivity analysis of solutions computed through the ANM: application to the geometrical nonlinear behaviour of a laminated glass beam, IV European conference on Computational Mechanics ECCM 2010, Paris.

  • F. Abdoun, L. Azrar, E.M. Daya, Forced vibration analyses of a Piezoelectric/elastic/viscoelastic/elastic/piezoelectric structures. The fifth International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2010, Tunisia.

  • J-C. HELL, M. DEHMAS, G. GEANDIER, N. GEY, S. ALLAIN, A. HAZOTTE, J.P. CHATEAU - “Influence of the austempering temperature on the microstructure and crystallography of a carbide-free bainitic steel“ - Solid-Solid Phase transformations in inorganic Materials – PTM 2010, 6-11 june 2010, Avignon (F).

  • On the role of short-range vs. long-range spatial correlations in dislocation patterning, J. Chevy, C. Fressengeas, M. Lebyodkin, P. Bastie and P. Duval, Fifth International Conference Multiscale Materials Modeling MMM2010, October 4-8, 2010, Freiburg, Germany

  • Continuity constraints and spatial correlations on interfaces in crystal plasticity, B. Beausir, C. Fressengeas, N.P. Gurao, L.S. Toth and S. Suwas, IVth European Conference on Computational Mechanics-ECCM IV, Solids, Structures and Coupled Problems in Engineering, ECCOMAS, Paris, May 16-21, 2010.

  • H. PAUL, A. MORAWIEC, J. DRIVER, M. DARRIEULAT, E. BOUZY, Shear banding phenomenon in a Cu-8at%Al alloy analysed by orientation imaging microscopy, J. Microscopy, 237 (2010) 314-319.

  • Grain Fragmentation in Equal Channel Angular Pressed Copper Gu CF, Toth LS, Beausir B, Williams T, Davies CHJ, Conference Information: 7th Pacific Rim International Conference on Advanced Materials and Processing, AUG 02-06, 2010 Cairns, AUSTRALIA Source: PRICM 7, PTS 1-3 Book Series: Materials Science Forum Volume: 654-656 Pages: 1570-1573 Part: Part 1-3 Published: 2010

  • Structure and Mechanical Properties of Asymmetrically Rolled IF Steel Sheet, Orlov D, Lapovok R, Toth LS, Timokhina IB, Hodgson PD, Bhattacharjee D, Haldar A, Conference Information: 7th Pacific Rim International Conference on Advanced Materials and Processing, AUG 02-06, 2010 Cairns, AUSTRALIA Source: PRICM 7, PTS 1-3 Book Series: Materials Science Forum Volume: 654-656 Pages: 1255-1258.

  • N. Gey, P. Blaineau, L. Germain, M. Humbert, D. Barbier, A. Perlade ‘Restitution of the shapes and orientations of the prior austenitic grains from inherited alpha' orientation maps in steels’, International conference of Solid-to-Solid Phase Transformation in Inorganic Materials (PTM), June 6-11 2010, Palais des Papes, Avignon, France. (accepted for publication in Solid State Phenomena).

  • ‘‘Residual stresses after dry Machining of Inconel 718, experimental results and numerical simulation’’, G. Lecoz, M. Marinescu, A. Moufki, D. Dudzinki,CIRP 2nd International Conference Process Machine Interaction, 2010, Vancouver Canada.

  • B. Erzar, P. Forquin, C. Pontiroli, E. Buzaud. Influence of aggregate size on the dynamic behaviour of concrete subjected to impact loading. ICEM14 2010, Poitiers, France

  • P. Forquin, Experimental approach and modelling of the mechanical behaviour of graphite fuel elements subjected to compression pulses. ICEM14 2010, Poitiers, France

  • P. Forquin, M. Nasraoui, L. Siad, A. Rusinek, An experimental method of measuring the quasi-static and dynamic confined behaviour of PMMA. ICEM14 2010, Poitiers, France

  • P. Forquin, M. Nasraoui, A. Rusinek, L. Siad, On the brittle-ductile transition involved in the compressive behaviour of PMMA. SOLMECH 2010, Varsovie, Pologne

  • A. MOUFKI, D. DUDZINSKI, G. LE COZ, An analytical thermomechanical modelling of helical tooth milling processes using a predictive cutting theory, 2nd International Conference CIRP on Process Machine Interactions, Vancouver, June 10-11, 2010.

  • G. LE COZ , M. MARINESCU, A. MOUFKI, D. DUDZINSKI, Residual Stresses after Dry Machining of Inconel 718, Experimental Results and Numerical Simulations, 2nd International Conference CIRP on Process Machine Interactions, Vancouver, June 10-11, 2010.

  • X. Soldani, A. Muñoz-Sánchez, H. Miguélez, A. Molinari Numerical Modelling of Segmentation Phenomenon in Orthogonal cutting 2nd CIRP International Conference Process Machine Interactions Vancouver (Canadá), 10-11 June 2010

  • T. Baudin, C. Esling, L. Kestens, T. Al-Samman, W. Skrotzki, Some major features in texture and anisotropy field, Adv. Eng. Mater. 10, 967-970, 2010.

  • Y. D. Zhang, C. Esling, X. Zhao, L. Zuo. Application of a High Magnetic Field during Thermo-Treatment of Metallic Materials as a Potential Means for Microstructure Modification, Materials Science Forum,Vol. 638 – 642, 202-207, 2010.

  • Y. Wu, C. S. He, Y. D. Zhang, X. Zhao, L. Zuo, C. Esling. Effects of High Magnetic Field Annealing on the Nucleation Sites for Recrystallized Nuclei with {111} < 112 > Orientation in Cold-rolled IF Steel Sheet, Materials Science Forum, 638-642, 824-828, 2010

  • C. Esling, D. Y. Cong, J. Bai, Y. D. Zhang, J. M. Raulot, X. Zhao, L. Zuo. Structure and Phase Stability of NiMnGa Ferromagnetic Shape Memory Alloys by Experimental and ab-initio Techniques, Materials Science Forum, 638-642, 2040-2045, 2010.

  • Grain Fragmentation in Equal Channel Angular Pressed Copper Gu CF, Toth LS, Beausir B, Williams T, Davies CHJ, Conference Information: 7th Pacific Rim International Conference on Advanced Materials and Processing, AUG 02-06, 2010 Cairns, AUSTRALIA

  • Bai J, Raulot JM, Esling C, Zhao X, Zuo L Structure stability and magnetic properties of Ni2XGa (X = Mn, Fe, Co) Ferromagnetic Shape Memory Alloys by DFT approach TEXTURE AND ANISOTROPY OF POLYCRYSTALS III Book Series: Solid State Phenomena Series Volume: 160 Pages: 69-74 Published: 2010

  • B. GOUBAULT DE BRUGIERE, F. MARION, M. FENDLER, V. MANDRILLON, A. HAZOTTE, M. VOLPERT, H. RIBOT, “Micro tube insertion into indium, copper and other materials for 3D applications”, 60th Electronic Components and Technology Conference (ECTC 2010), 1-4 juin 2010, Las Vegas (USA) - Actes “Proceedings 60th ECTC”, Book Series: Electronic Components and Technology Conference, Pages: 1757-1762

  • P. Forquin, M. Nasraoui, A. Rusinek, L. Siad, Experimental study of the confined behaviour of PMMA under quasi-static and dynamic conditions. DYMAT 2010, Strasbourg, France

  • H. Bian, A. Daouadji, Y. Jia and I. Shahrour, Influence of soil saturation on the free field responds of liquefiable soils, Shanghai, China, 2010.

  • G. ROBIN, F. VANDER MEULEN, N. WILKIE-CHANCELLIER, L. MARTINEZ, L. HAUMESSER, J. FORTINEAU, P. GRIESMAR, G. FEUILLARD, Monitoring of the nonlinear coefficient during silica gel formation using an ultrasonic self-calibrated method, Ultrasonics Symposium (IUS), 2010 IEEE, San Diego, U.S.A., 11-14 October, 2010, ed. IEEE, pp. 825-828.

  • C. Esling, Y. D. Zhang, J. Muller, X. Zhao, L. Zuo, Calculation methods to determine crystallographic elements: interface plane, surfaces plane and twinning elements, based on electron diffraction orientation measurements by SEM and TEM, Solid State Phenomena, 160, 11-16, 2010.

  • X. Li, Y. Fautrelle, Z. M. Ren, A. Gagnoud, Y. D. Zhang, C. Esling, Morphological instability of interface, cell and dendrite during directional solidification under strong magnetic field, ICCG16/ICVGE14, Beijing, China, 08-13, 2010, Journal of Crystal Growth, 318 (2011) 23-27.

Année : 2009
  • S. Bahi, A. Moufki, M. Nouari, M. Elmansori, A. Molinari, Analysis of tribological parameters during machining, The 12th International ESAFORM Conference on Material Forming, University of Twente, Netherlands, 2009, 4 pages.

  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmitonnet, N. Legrand, P. Buessler, Coupled and uncoupled approaches for thin cold rolled strip buckling prediction, International ESAFORM Conference on Material Forming, April 27-29, 2009, Twente, Netherlands.

  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmitonnet, N. Legrand, P. Buessler, Modelling and Investigations of Strip Flatness including Buckling Phenomena during Strip Rolling, 5th European Rolling Conference, June 23-26, 2009, London, UK,

  • G. Altmeyer, F. Abed-Meraim, T. Balan. Formability prediction of thin metal sheets using various localization criteria, 12th International Esaform Conference on Material Forming, University of Twente (The Netherlands), 27-29 Avril 2009, CD-ROM, 4 pp.

  • E. Béchet, M. Kuna, Application of the X-FEM to the fracture of piezoelectric materials, IUTAM Symposium "Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems", September 1-4, 2009, Freiberg, Germany.

  • E. Béchet, N. Moës, B. Wolhmuth, M. Moumnassi, V. François, Simulations in ambient space: freeing mesh generation techniques from the respect of boundaries in the context of the FEM, 11th ISGG conference, Montréal, may 25-28, 2009.

  • S. Berbenni, D. P. Do, G. Albert, D. Hoxha, Micromechanical Modelling of Isotropic Viscoelastic Behavior of Composites: Translated Field Approach. Proceedings of the 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, Virginia, USA, June 24-27, 2009.

  • S. Berveiller, B. Malard, E. Patoor, Intragranular austenite orientation evolution of a Cu-Al-Be SMA during an in-situ tensile test, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009. DOI : 10.1051/esomat/20090600

  • S. Berveiller, M. Kemdehoundja, E. Patoor, D. Bouscaud, M.R. Berrahmoune, Influence of pre-strain and carbon content on delayed cracking phenomenon in unstable austenitic steels, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009.

  • X. F. Bi, G. Sutter, G. List, Y. X. Liu, Influence of Chip Curl on Tool-chip Contact Length in High Speed Machining, Mater. Sci. Forum, 626-627 (2009) 71-74.

  • I. Charpentier, C Dal Cappello, J. Utke, The Rapsodia tool for fast higher-order derivative tensor computations, Taylor Model Methods Workshop May 25-28, 2009.

  • Y. Chemisky, B. Piotrowski, T. Ben Zineb, E. Patoor, Numerical study of mean-field approach capabilities for shape memory alloys matrix composites description, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009.

  • P. CHEVRIER, A. RUSINEK, S. PHILIPPON, L. FAURE, E. DOSSOU, A. LODIGOWSKI, G.Z. VOYIADJIS, Evolution of an Original Device Allowing the Determination of the Dry Friction Coefficient in Dynamic Conditions, Workshop "Theoretical and Experimental Approaches for Dynamic Industrial Processes", Madrid, Leganés - 24-26 June 2009.

  • A. Daouadji, M. Jrad, A. Lejeune, F. Darve, Collapse of soils: experimental and numerical investigations, Int. Symposium on Prediction and Simulation Methods for Geohazard Mitigation, Kyoto, Japan, 2009.

  • A. El Kinani, M. Taraf, M. Haterbouch, O. Oussouaddi, A. Zeghloul, Influence des effets d'inertie sur la durée de vie à l'amorçage de fissures de fatigue dans une roue ferroviaire, Congrès de Mécanique, Marrakech - Maroc, 21-24 avril 2009.

  • I. Elkhaldi, K. Lampoh, I. Charpentier, E.M. Daya, Sensitivity analysis and optimization of solutions computed through the ANM, Taylor Model Methods Workshop, May 25-28, 2009.

  • C. Esling, D. Y. Cong, Y. D. Zhang, J. M Raulot, H. Faraoun, X. Zhao, L. Zuo, Structure and Phase Stability of NiMnGa Ferromagnetic Shape Memory Alloys by Experimental and ab-initio Techniques, THERMEC'2009, Berlin, Germany, 2009.

  • O. ESSERSI, M. TARFAOUI, S. BOYD, F. MERAGHNI, R.A. SHENOI, Dynamic study of adhesively bonded composite adherents, 17th Int. Conf. Composite Materials, ICCM-17, Edinburgh, July 2009.

  • G. Franz, F. Abed-Meraim, T. Ben Zineb, X. Lemoine, M. Berveiller. Strain localization analysis deduced from a large strain elastic-plastic self-consistent model for multiphase steels. 12th International Conference on Fracture, Ottawa (Canada), 12-17 Juillet 2009, 10 pp.

  • L. Iannucci, M. Evans, R. Irvine, E. Patoor, D. Osmont, Morphing Wing Design, MCM-IPT Conference, 22-23 June 2009, Lille.

  • N. Jacques, C. Czarnota, S. Mercier, A. Molinari, A micromechanical constitutive model for dynamic damage and fracture of ductile materials, IUTAM Symposium: Dynamic Fracture and Fragmentation, March 2009, Austin, Texas.

  • S. Kannan, C. Giraud-Audine, E. Patoor, Control of a Shape Memory Alloy (SMA) Actuator using Serie-Parallel Model Reference Adaptive Control (MRAC), ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS, September 20-24, 2009, Oxnard, USA, accepted.

  • P. Laheurte, W. Elmay, A. Eberhardt, T. Gloriant, F. Prima, E. Patoor, Development of nickel-free shape memory alloys for biomedical applications, Joint ASCE-ASME-SES Conference on Mechanics of Materials. June 24-27, 2009 Blacksburg, VA, USA, Conference Symposium on Shape Memory Alloys.

  • G. LE COZ, M. BENGHERSALLAH, A. DEVILLEZ, D. DUDZINSKI, Machining study of a hard to cut die forging material - Stellite 6, 5th International Conference on Design and Production of Machines and Dies/Molds, June 18-21 2009, Kusadasi, Turkey, Proceedings pp 275-280.

  • R. Ly, C. Giraud-Audine, R. Bigot, G. Abba, Longitudinal vibrations modeling of a piezoelectric actuator used in forming process (2009) IEEE 2009 Int. Conf. on Mechatronics, ICM 2009, art. no. 4957179.

  • R. Ly, C. Giraud-Audine, L. Morhain, R. Bigot, G. Abba, Experimentally Validated Approach for the Simulation of the Forging Process using Mechanical Vibration, 12th International ESAFORM Conference on Material Forming ESAFORM 2009, Twent, Holland, cd-rom.

  • M. MARINESCU, M. JRAD, A. DEVILLEZ, D.DUDZINSKI, Cutting Temperature Measurement during Drilling of Ti6Al4V, Comparison between Modelling and Experimental Results from Thrust and Torque Point of View, 12th CIRP Conference on Modelling of Machining Operations, May 7-8, 2009, San Sebastian - Spain.

  • S. Mercier, A. Molinari, N. Granier, F. Llorca, T. Grunenwald, Multiple necking in dynamic expansion of metallic hemispheres: theory and experiments, IUTAM Symposium: Dynamic Fracture and Fragmentation, March 2009, Austin, Texas.

  • T. Merzouki, C. Collard, N. Bourgeois, T. Ben Zineb, F. Meraghni, Coupling between experiment and numerical simulation of shape memory alloy multicrystal, ESOMAT 2009, 7-11 Sept. 2009, Prague, doi:10.1051/esomat/200906035.

  • M.H. Miguelez, R. Zaera, A. Molinari, A. Munoz-Sanchez, The influence of cutting speed in the residual stresses induced by HSM in AISI 316L steel, 12th CIRP Conference on Modelling of Machining Operations, San Sebastian, Spain, 2009.

  • F. Mohri, N. Damil, M. Potier-Ferry, Un modèle poutre 3D pour le calcul non linéaire des poutres à parois minces, Communication 71 session 16, 19ème Congrès Français de Mécanique, Marseille, 24-28 août 2009.

  • M. Nasraoui, P. Forquin, L. Siad, A. Rusinek, E. Dossou, Mechanical behaviour of PMMA: influence of temperature and confining pressure, 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, DYMAT, 7-11 September 2009, Brussels, Belgium. doi: 10.1051/dymat/2009154, pp. 1103-1108, 2009.

  • S. Nezamabadi, H. Zahrouni, J. Yvonnet, M. Potier-Ferry, Multiscale Microbuckling Analysis of Elastoplastic Long Fiber Composites, 7th EUROMECH Solid Mechanics Conference, Lisbon, Portugal. September 7-11, 2009.

  • H. NOURI, C. CZARNOTA, F. MERAGHNI, P. LORY, Fatigue Damage Model for Short Glass Fibre Reinforced Thermoplastics, 17th Int. Conf. Composite Materials, Fatigue session ICCM-17, Edinburgh, July 2009.

  • H. NOURI, F. MERAGHNI, C. CZARNOTA, P. LORY, Experimental Identification of Fatigue Damage Model for Short Glass Fibre Reinforced Thermoplastics, 7th International Conference on Composite Science and Technology (ICCST-7) Shareja, January 2009.

  • Y. PAYANDEH, F. MERAGHNI, E. PATOOR, A. EBERHARDT, Effect of martensitic transformation on the interfacial debonding onset and propagation in NiTi shape memory wire composite, 17th Int. Conf. Composite Materials, ICCM-17, Edinburgh, July 2009.

  • Y. Payandeh, F. Meraghni, E. Patoor, A. Eberhardt, Numerical and Analytical Estimation of the Interfacial Shear Strength in NiTi-Epoxy, 7th International Conference on Composite Science and Technology (ICCST-7), January 20-22, 2009, Sharejah- UAE.

  • Y. PAYANDEH, F. MERAGHNI, E. PATOOR, A. EBERHARDT, Martensitic Transformation and its Effect on the Interfacial Debonding in Single Ni-Ti Fibre/ Epoxy Composite, ESOMAT 2009, Prague (2009) doi:10.1051/esomat/200906026.

  • B. Piotrowski, T. Ben Zineb, E. Patoor, A. Eberhardt, Analysis of Niobium precipitates effect on the thermo-mechanical behavior of a NiTiNb Shape Memory Alloy and Modeling, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009.

  • M. Rabahallah, T. Balan, F. Barlat, Anisotropic strain-rate potential based on multiple linear transformations, Esaform, Twente, avril 2009, sur CR-ROM.

  • J.A. Rodriguez-Martinez, A. Rusinek, A. Arias, E. Dossou, On the perforation process of 2024-T3 aluminium sheets subjected to low impact velocity: Effects of friction condition and initial temperature, 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, DYMAT, 7-11 September 2009, Brussels, Belgium.

  • N. Siredey-Schwaller, A. Eberhardt, E. Patoor, P. Bastie, Relation between crystal quality and fatigue life of a Cu-Al-Be single crystal shape memory alloy under repeated bending, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009.

  • V. Taupin, S. Berbenni, C. Fressengeas, O. Bouaziz. Towards a new mean field approach including internal length scale validated by a dislocation fields mechanics theory. Proceedings of the 1st International Conference on Material Modelling, Dortmund, Germany, September 15th-17th, 2009.

  • M. Teaca, I. Charpentier, M. Martiny, G. Ferron, Mixed Experimental-Numerical Analysis for Identifying Sheet-Metal Anisotropic Yield Surfaces, ESAFORM 2009, Twente, Hollande, 27-29 avril 2009.

  • G.Z. VOYIADJIS, B. DELIKTAS, A. LODIGOWSKI, B.N. PALAZOTTO, S. PHILIPPON, A. RUSINEK, L. FAURE, P. CHEVRIER, High Rate and Frictional Effects in Wear of Metals, Workshop "Dynamic Behaviour of Materials", may 13-15, 2009, Metz - France.

  • P.M. Wasmer, G. Mussot-Hoinard, S. Berveiller, E. Patoor, A. Eberhardt, Kinetics of precipitation and mechanical behavior of CuAlBe single crystal drawn-wires, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009.

  • Y. Wu, C. He, Y. Zhang, X. Zhao, L. Zuo, C. Esling, Effects of High Magnetic Field Annealing on the Nucleation Sites for Recrystallized Nuclei with {111} <112> Orientation in Cold-rolled IF Steel Sheet, THERMEC'2009, Berlin, Germany, 2009.

  • H. Zahaf, O. Oussouaddi, A. Zeghloul, Simulation numérique de la durée de vie à l'amorçage d'une fissure dans une roue ferroviaire, Congrès de Mécanique, Marrakech - Maroc, 21-24 avril 2009.

  • P. BOCHER, F. BRIDIER, L. TOUBAL, N. BOUTANA, E. UTA, N. GEY, M. HUMBERT, Dwell-Fatigue in Near Alpha Titanium Alloys: A Multiscale, Interdisciplinary Challenge, July 2009, Ottawa (CA), 12th International Conference on Fatigue, 12-17 (2009).

  • P. L. BONANNO, S. GAUTIER, A. A. SIRENKO, Z.-H. CAI, J. MARTIN, W. H. GOH, A. MARTINEZ, A. RAMDANE, L. LE GRATIET, T. MOUDAKIR, N. MALOUFI, M. B. ASSOUAR AND A. OUGAZZADEN, 3D reciprocal space mapping of selectively grown GaN nanostructures using submicron beam x-ray diffraction, presented at the EMRS spring meeting 2009, Strasbourg, France, EMRS spring meeting.

  • W. H. GOH, P. L. BONANNO, J. MARTIN, S. GAUTIER, N. MALOUFI, A. A. SIRENKO, A. KAZIMIROV, Z. -H. CAI, A. MARTINEZ G, A. RAMDANE, L. LE GRATIET, G. PATRIARCH, M. B. ASSOUAR, T. MOUDAKIR, A. OUGAZZADEN, Selective growth of GaN nanostructures on SiC by MOVPE and their strain relaxation study by submicron beam x-ray diffraction, , June 7-10, Ulm-Germany, Proc. EW-MOVPE XIII Conference (2009) 193.

  • B. KREBS, A. HAZOTTE, L. GERMAIN, M. GOUNE, Quantitative analysis of banded structures structures in Dual-Phase steels, The 10th European Congress of Stereology and Image Analysis (ECS10), 22-26 juin 2009, Milan (I), actes à paraître dans Image Anal Stereol.

  • P. LIPINSKI, N. BONNET, A. TIDU, Development of a specific constitutive law for modeling of mini-component forming processes and its experimental identification and validation, K. Workshop "Dynamic behavior of Materials" Ed. Rusinek & P. Chevrier (2009) 283-293.

  • T. MOUDAKIR, S. GAUTIER, G. ORSAL, N. MALOUFI, D. J. ROGERS, F. HOSSEINI TEHERANI, F. JOMARD, M. ABID, N. FRESSENGEAS, A. OUGAZZADEN, "MOVPE growth of InGaN on ZnO-buffered Si(111) substrates for solar cells applications", June 7-10, Ulm-Germany, Proc. EW-MOVPE XIII Conference (2009) KR9.

  • iMP?.mmad, J-M. Fl26 jui. Siad, Experimental skara, n Copiz, On P alpha' orienon andsme stee of the 2009 Joint ASCE-ASME-SES Conference on Mechanics and MVol. erials. Ju27, 2009 Blacks0, Paris.

  • ng, Effach fentiple-Sionant zonen effects psodwgue eraturaring tenthe Determon oing of Mmulatio">SMoufki, M. . Bahi, A. Mouari, M. Elmansori, A. ,stee36(CA), 12th International ConOntment o Bld mecCraring2010einfspanilrt sCMCTFMay 7-8, 20EE, SanCon strg, Virginiermany, 2009.

  • B.tiroli, E Forquin, C. Ponsraoui, P. FTn-situ s Shear Sodell fts i Vaad Nongs. lonmapp their cs .Vol. oading, DYMAT, 7-11 September 2009, Brussels, BBelgium. doi: 10.1051/dy086/20091603-609o, Japan, 2009.



  • Ad o-A>S.pan>Par re, Cgalvandsdentifiu Surmpée dece ud,  e9in 16,ciaire, Congrès de M, eanique, M,rakech- Maroc, 21-24 avr  e(ted for publraîttierevnumérrès de MM. Kunque laThéoon nu17 (2009).

  • Ad o-A>Pal-Pha, atheory.e steels. 2009 Int. CDynamic F(atigue0, 6-, Ch July 2009,ancouve), a (2009).

  • Ad o-A>

  • Wa ModAUTW. QiAl-SamLrbiepan>X.Ple, Z. . Zhao, L. span>Y. D. Zhang, C. EsliPloty a l and ctuatoic properIy suOxyhydroxNongNanordel Syntdy oz publ Hydrotcts Of nce and TeliPROCEEDINGS OFMaND INTERNATIONAL SYMPOSIUM ON PHYSICS ASSOHIGH-Tth EINDairnY, 4TH INTERNATIONAL SYMPOSIUM ON MAG, NICEINDairnY, 1STNI, RYANGSSERUM SER DEVELOPMENT ASSOCOOPERATIONISOTHIGH-Tth EINDairnYEIN NORTHFRET ASIA (. esium13 DY3-1123-27.

Ann8e : 2009
  • D. GEYEHAUXes/Mol">A. DEVILLEZI, G. LE CEZ, D.DUDZINSAudy of dwgue non andsmrelatiape mng of Maez,onautn Mech024-T3 al memorediction, International Conferngth in High Speed MacDarmlfodtWorksho 111, 2010.

  • G. Altmeyer, F. Abed-Meraim, T. Bali6Al4V, ComEffeponent limird tor, mreabilityHig Nuclm x-site various localization criteria, 12th International Conf Sheeaterial FKqueow (Po, Ne) - MarocT, 7-11 Septe8/200912201011, 2010.

  • , T. Beyer, F. Abed-Me.erhardt, Numerical invesanaltnchlimirdp theition m Stefeponent nsitioi, Coueated ba, 12th Internationt. Cnce 10, Pradient PlperaturCTPodAyeiaiju FKore crs, 7-11 Septe8/20091690-69511, 2010.

  • I. Charpe.ntier, C Dal Cappello, JEtion CoefHr fastOhigheD-order de analtnchHyeti to the g Func descriptence onripteutomquasiD x-site iinvesa(AD. esiumLeamic FNotl str ence on Computmposite Scielems in Engin64ebas Engharp12 DY3> May 1255-1258.

  • I. Charp. Jrad, A. Lvonnet, M. PotiersteeDii.1expeidated Approaipitaon CoefeutomquasiD x-site iinvesanaltnchtiesptouasilinari Numlement iptence onripteutomquasiD x-site iinvesa(AD. esiumLeamic FNotl str ence on Computmposite Scielems in Engn64ebas Engharp139-149 May 1255-1258.

  • Y. Chemisky, A. Dses , B. Piotrowski, T. Ben Zineb, E. Patoor, NuCurltoortial bF, n CoEfinite mlemenge ModMA L. Zuo, Stng Wing (MRAC), ASME Conference om Smart Materials, Adaptive Structures and Intelligent (SystemiumE of ott C Plpeakeyent, HrginiMM2010, 28-30,epte8/2e For1/20091411-40) 314-319.

  • Y. Chemisky, A.V.RIDIahi Elmansler, A. Eberhardt, E. terials Miad, anical behaviSysoelasto trory wire coms 2010, PICs, in ES8-8, 2ta FE. PMadelphia, USA.

  • B. Erzar, P. FSmental studylcts otropic strsonlinear behavioy by -orur of ,of PMMA.,epte8/2GraîkVarsovie,hia, USA.

  • O. ESSERSI, M. TARFAOUI, SRAGHNI, R.A. YANDEH, F. MER Siad, Experimental study on the dynamic behavdouin ulap je 20tigations, Int. SympoAircraf in Smart S, Paritigber 208 AgadiE. ter 20oan, 2009.

  • TMachoe

  • TMacouaddi, A. ZegmproueMRS sce on Mecagnetic properAPI X60/X70dwgls ofpipialseiguectsanba, 12Quadr S. Mec(eIQgas s. 12th International Conference on chnoF)er1-5), 22-26 8/2AlgharpAlgtion,hia, USA.

  • TMacouaddi, A. Zençois, Simutefpour led soveatise fissset and proporçage d'une fssures de fatigd soen>S.soutre Mi Scicturenftio, Confe 12th Interd'inerteMaterialssnflriqurès de MM16- 18FNov-11 Septe8/2O SyElgeas,ghias (lgtion,hia, USA.

  • S. Kannan, C. Giraud-Audine, E. erials, APsing a prePatoor, CondMA y (SMA) Mateectric a9 A8ri, 22-23 8umr initn, Texas.

  • S. Kannan, C. Giraud-Audine, E. imental Identifica on thetructuhlige in Congrl of a Shape Memory Alloa (SMA) ActuatoL2009rrage lt0, Po(. e8ss (200M, 12th Interns, Int. SympoDynamic IndSeries: ElsICM 2009, ar676941/20091538Chin9) 283-293.

  • M. NaR SlD, Monavenuen effectsdnce ondellcts losnstraintalf forging momputed y by / of -l thermomechanic Mo:ti cells appubjeautomoQuantwindshgneticg Wing ation09 Intture in Smart Mamericrials, Adaptive Stk SerheTranomechanical Mouctureensor com.ame-16l, 08-09 110TY. >S.,pMordccohia, USA.


  • M. MARINESCU, A. DEVILLEZ, D.DUDZINSCutting Tempation measu Nuclompeelm x-site eration tecn of measurdduring Drilling ofu Nucls using dduri to the emulati3rting 2nd CIRP International Conferngth POn thme onrKI,es/MolDclasmraI strNen, 22-23 8OM, 4 pp.

  • automquasidng the Determinapes and orien theof viscoer.ResulKo009, y by m x-ray diffrheory, ORP 20101e 6, 5th International ConferTres inMechanics of M. LE COZ (heory, ORICsT09 15. LE COZ)cs fPitt09 Blho(. e8sOM, 4 pp.

  • S.,pMordccohia, USA.

  • S. Nezahrouni, J. Ykhalek, H. Zahrouni, M. Potier-Ferry, Mulle Microbitative analhng tf a eing forging Mat8thationldEuropean Cor ence on Computence on Me(Wria8ssuctu5thathe 10th European Cor ence on ComputenModel ipte celO-buerialssnScielems in Engn(Eris, Septe8)nia, US30as lleng5,epte8/2eeon ulti l a11, 2009.

  • H. NOURI, C. CZARNOTA, F. MERAGHNI, Ppte8/2ateroul, Sim theory and experimental identifhaviowardures de fanamicitutive mosel fog Shorf Glasr Fibre Reitforced Thermopla3, The 17th Int. Conf. Composite MatErials3 FSmockholmn, 22-23 8Oia, USA.

  • Y. Payandeh, F. Meraghni, E. Patoor, A. Eberfacial DePet and propagavior ogrl of a Shapee Ni- in Niompoloys/ Epoxy Com of the 1st International Co/Exhibiansformag Fiber Co (CCFA-1)berfcny, Sept-18 Ppte8/2KisK. L PhOia, USA.

  • Y. Payandeh, F. Meraghni, E. Patoor, A. EbeIerical invesanaltnch on the Interfacial Debontrol of a Shapeor ogt Glass Fibre Reiin Niompoloys/ Epoxy ComErias3 F 22-2-5,epte8/2Smockholmn,Sweditn, Texas.

  • M. Rabahallah, T. Balan, F. S their cs ain-rate psu Nucliur oamationccurayyve moseStefeponent merical sioplrCTPodAyeiaiju Fs, 7-11 Septe8/200911650-165200906035.

  • ">S.,pMordccohia, USA.

  • X. Soldahi, A. Zaera, A. Motirolda. RusiOzlü,rngth in High Speed MoperAHSM 1050olled : between Modelling and ExperVon and valihe FErfaces, ESA81th ISGG coal baorging mfterial FLynteritiers, o3-25)a 08-09 1th, 2009.

  • M.entier, M. Martiny, G. tifying Sheeradientet-Metal Ay imental publiFerron, Mixed Experimental-Numlement e, 17th Int. Co.EUROMECH Solid MH. SM9 110Nov-1114 Oc7-30,epte8/2HoSperiah C PlpeVietna, Belgium.

  • Pal-Pha eir str dife Nuclome y by s. Zuo, Structures in ntation eoplae 6, 5th International ConferTres inMechanics of MchnosT09 15)as ll-6,epte8/2Pitt09 Bl/2Pennsylvandaas Ceh,martensitne Inte,epteo(. e8ss79-8200906026.


  • ,SLINGD. Zhaspn>5th International Conference on Advanced Materials and ProcDour: SEPing, 5,epte8 Harbrg Inof nce and Harbrg PeoceTe RBeijing, 5th Internb>Of betwrnical ans Bea23nference 771- 776009) KR9.

  • AAURRUTIAM. TeMACLAROUGA">Joucal ans A, USA, Confee emul126o(. e8ss120-1/200906026.

  • AAURRUTIAM. TeMACLAROUGA">Joutiscasc Ayea23eo(. e8ss445-4509) 71-74.


  • P. E. UTA, N. GEY, M. HMESGILG M. HEBSD bativboul sdMBERmage and f plane,ng sp Alpha TrMemorIMI834ediction, International Contion of teriaadient PlaFesulMon andsmrebjeng Wing Daio(. e8ss3pt-3229) 71-74.


  • 5th Internion, K. Won Bifurcd orien theDet, dd orie racGeoforging MatLake LouiseiguDo, G9,ancouve,epte8Germany.

  • "><Total bNESCU, Bhjeeebas Engha VThe gFl26 jui0091415-42e, ,ATS9 A8ri,amr, ppuE. Padn crFebr-7), 4-7,epte8Os, 2009.

  • TONESCU< ngA.RM RaulotiMP00912op, 2any, 2009.

  • Ad o−a>Pal-Pha afaS.phot−dipCgalvandrransf,  e«ls under fynamic Fractfanamicnalyrittl Fractfure of ductile m ocesses iynamic Indi cells appl » e(Sept 3-5,epte8/2Pozn>S. rsovie,sOM, 4 pp.

  • ,SLINGD. ZhaMineALCAG,N. PAL">

  • WaAlpcbeY. Zhang, X. Zhao, uraoon k009,ang, C. Esli. Cong, Y. D. Z. Tww eidated Ae X-res i Pr Sciegrarg pect ofy eems in Engnby Ga Ferromew me eidells app, Ceh,martensitne Int,epteo(. e8ss421-4340091, 2010.

Ann7e : 2009
  • , F. Abed-MeraAnt. Cbescn ./gmprouedkfteroul, Simpproach gical iz puenhe on Aer.tesid-umill efinitee(SHB8PS): to the g culgue imenecalculgue medical applic1-Epoxy, 7th International ConferenceuaS.penModel iptH Solid MH.Lodz-Sstla (Po, Ne) -19-22,J 22-26 7ril 2009 9D-ROM, 4 pp.

  • Taupin, S. s, 2009li.publ sIyleiv res-decthe per:ateriaculg;"iollN idises, 2009li.publ sIyleiv res-decthe per:ateriaculg;"iT. Richh. Ms, 2009li.publ sIyleiv res-decthe per:ateriaculg;"i/u>, M. Berv 2009liOnegrarg oz idistweigue etional Effsion of mpolys for Rm ocessluding internam oh, ciayHig Nuclm sr of celastic-pliprhng tf a etaiec6LvMDS embetheory. Proceedings e FEM, 12th Interns, Int. SympoPatoinu Syloy a Machinesr of clligentbet4V, halleng30Vol. Augfrom3,epte7umLeMaaltise fissl'èsroeed soM of Misst4V, ny, 2009.

  • r,ical and AnaevaluinvesanaltnchetionaonstEMCCfhavthanwichlbmictr NuclalseSan-itutmig ofceh,maricaerrovMSMepte7umMntestir00906026.

  • . Straiss app, Numions, ELisboE.j 22-26 7ri0091147-1529) 71-74.

  • F./u>,analF. Mohri, N. Damil, M. Potierloyéaiss appopiz éaé measu andsinéaire des poutres à paroiutefpousey difsuruingrecipnegraos A) Mapp, 7n 16, 19ème Cs mès de MMdurakech -Elijadidaao a7Os, 2009.

  • , XISBN 978-83-89687-16-6,ePaidar, r IPPT-eotish Academstabi by EDP Scien7Os, 2009.

  • rzar, P. FROGEiGruneaw for modeingsposium: Dyn and Fragm Forging 22-Brittl Fmposite MatMc, in ES7rch 2009, Austiadelphia, USA.

  • G. Franz, F. Abed-Meraim, T. Ben Zi/u>, M. Berveien Zineb, X. Lem./AomFerry, Mulitutivtential bclurar, Intragy by s. Zuo, Stf PMMA: influt, in-y, MulSi(111Zuo, Stl baoscasc Ahe dynamic behavanbaF-l-Pha n of meof mlex lyna paihsperature, 9th International ConNUMIces, ELisbo (Posbon, ) -17-21,J 22-23 7riAmer.aIogi.ucal ans A, Us theo.per08o(. e7) 1345-135p 275-280.

  • G. Franz, F. Abed-Meraim, T. Ben Zineb, X. Lemoine, M. BerveillAomFerry, Mulitutivtential bclurar, Intragy by s. Zuo, StPbility preulaed by a dislpai, Gnsuesentedmiscasc Ahe A Multrature, 9th International ConNUMIces, ELisbo (Posbon, ) -17-21,J 22-26 7riAmer.aIogi.ucal ans A, Us theo.per07o(. e7) 47-52OM, 4 pp.

  • , M. es/Moli>A. DEVILLEZ, D. DUDZINSAt bon4V, Coficaonon gnternence of cçois, Simuctuatoawolm x-site f, n Coefiniteeyeriaspe"y,ion, K. Won Cecific const str difsrimenent and numerical simulaiynamic Ind on the forming p COZ

  • <, MINESCUA. DEVILLEZ, D. DUDZINScal and Anagh Ra, n CoEfinite lidated substraingspduring Daterial Mod1spa0 FErfaces,. Sararoza COZ

  • F.mnasams relkhalek, H. ZahroElHadrou-Marliptimibuentifbjealizati Nurems woperent and numerical simulaFSWediction, International Confernforce-ence on Meceaw for modeUROME hallenperarrY2 F26 7riEcroeeeotyiration t,, Metz - France.

  • H. NOURI, F. MERAGHNI, PAoward on th on theg mfres de fanamicitutive moach gel fog Shorf Glloy Fibre Reitforced Therm forloy9116site, 17th Int. Conf. Composite Materials6hallenge, 7riKyoboE. Kyot- France.

  • M. Rabahallah, T.Sngeasms relBicioscaixan>Y.Teodnt. , F, n Coefiniteemerical simulatiStefof thifterialuctuatoaarlat, Anisotropic strain-rate pMateI12th CIRP Contheory. Proper08o(. e7) 643-648Os, 2009.

  • M. Rabahallah, T.Sngeasms relBicioscaixan>Y.Teodnt. , Ito lowodeingsctesmng trimental identifhavd Therm in-rate psu effectf, n Coefiniteemerical simulatiStefof thifterialrmations, EZararoza, Twente, a7ri00913lla33000906026.


  • H. Zahaf, O. Oussouaddi, A. Zelinari Nuitative analcracktion an propagavi

  • PK M. TAeaw for modeingsdese transfonanical bachia by s. Zuo, S/ures in ntation eiehaviTW>Pal-Pha ficient Sue lynamic LM, 12th Interns, Int. Sympo Sue nanical bachiaon andsmrelatforging Mapadient PlpeNier, GeHEAR26 7rl 20omo(. e7) ISBN 2-9517090-7-29) 71-74.



  • N. MALOU">



  • N.AZIMIDJEBBM.. AHERANI, F. alspean Cor ward Nongysisgaptforging MaBGaJ. BGaAlN qualsizirain-rate pomedical applictheory. PrmodeUPI E26 7o(. e7) 647-11, 2009.





  • P. N. JAHAZI, Descrip propqual, Bhan (rihinvesanaltres in hng tf a etaiecig sp Alpha TrMemorlIMETAL 834r Nuclalbimodalty by s. Zuo, SriKyobo, Kyoto,3-ue0, 6-26 7ri e FEionldEuroonal Confern Alpha 6Lxo(. e7) 259-2629) 71-74.

  • Sha. HeNu>Wa Mod. Cong, Y. D. Zhang, C. EsliGtheir s ane DevelopmirAl-Cu-MgTrMemorby G by rMemo Pr Sciecomm effec the thermo-mectrthe Dev, ,ATERIALS SCIENCESSERUM, 546-549 M917-922 F26 7M, 4 pp.

  • Total bN LS>MINESCU, spanvanc.u by. Fora >MIN (REX &eGG III) ;558-55j:575-58000906026.

  • Pal-Phas afaS.pgalvandrransf, oeir:e«lPiz, On PSciecotoinu Syapprieropermes, A microl »  ey.e :nGa/u>Sih>SMoufaït-AbtentzizchaniTspau-Kmich (ISA. HAictnt,epte7) pp 593-60255-1258.

  • Pa l-Phas, eanques, Madposite haniTre and Te (MS&T)Ann7, entimibuentif iuxlan (I:i0091525-533.Fs, 7-11 Sep6-20,cien7O eD , Bit. tishl in0, Paris.

Ann6e : 2009
  • Ann5e : 2009

  • A.lBEOUan>PK M. al.OUo by s. Zuo, Structures in ntation eieha bon work ea304 gicinlan Clled lloys by Experimenaterial Mod1e(CA), 12th International ConOntAuso, StOhanics of Mes lleng e-15,epte5russels, Paidar, eag sniques, Madposite Fora 6LVoli495-497,ep 405-410M, 4 pp.

  • <, Y. D. Zhang, C. Esling, X. Zhao, uROMECstamica-Sol d Phase transfs teriallcts Ga Ferromew mesmagavimedna Tcanbon m-Pha,nosT09gberheory, OR/vanc.u by. Fora >MLE COZ6L495-497nfere5)g e3e-11401123-27.

  • <, Y. D. ZhaGspaparoev, /u>SY. Wu,ng, X. Zhao, ng, C. EsliTncheHARDT, Efallcts Ga Ferromew meWon y by s. Zuo, Srigrarg pect ofy saptive Structuures in on vimedna Tcanbon m-Pha terial x-site coofor m strsraICsT09gberheory, OR/vanc.u by. Fora >MLE COZL495-497nfere5)g 261-1/2200906026.

  • Y. uu,. Cong, Y. D. Zhang, X. Zhao, Fu>Wa Mod. C/u>, C. EsliEa piezoeew meWa FielIdeneff3104 h024-Ta TrMemoruminiu: ntation eiehay by s. Zuo, Structures inraITAP-2erheory, ORuROMECstamica-enom na>MLE COZ6L1e5rfere5)g 69-1709) 71-74.

  • Y. D. Zha HeNu>Wa Mod. Zhao, ng, C. EsliTnchf PMMA: influeuso, StructGBCD relaxMLE COZ6L1e5rfere5) 181-18200906026.

Ann4e : 2009
  • erMLE COZohriagialunalyus subterials TIrctStidn n es, eaion ourgn Mechani on th of the mecevaluinvesanalwhigenf thintation e.Mon e"gmproue DevelopbSuerip pOn thme onrterials TIrctoting ripicatdn n es," eIDF-LMS (Fus iasc A Frtoin p Mat7 oM201 Septe4)0) 71-74.

  • Ann3e : 2009
  • A.RM RaulJ>
  • A10.1e51/forgcStio/pt15330nn3e 280.

  • Yttiery by s. Zuo, Structures in naltnchf hibiansfolayIrnfephot-dipCgalvandrn AerPha. eanques, buerialssnScieTre and Te nn3, (Callago, 10-1/ ni -11 Septe3.)123- 45thatMWSPtStio.atheory. Proctat XLIi0091551-561Oia, USA.

Ann2e : 2009
  • 26-30 aoûtAnn2 Paidar, eag sniques, Madposite Fora 6LVoli408-412. p 14", 481, 2010.

  • 26-30 aoûtAnn2 Paidar, eag sniques, Madposite Fora LVoli408-4 -spiz, 2. p1759-17641, 2010.

  • Ann1e : 2009
  • A1999e : 2009
  • 6L1999atpp. 71/ ol. 717M, 4 pp.

  • A1998e : 2009
  • A1997e : 2009
  • A1996e : 2009
  • , 11 SsGASmental s&an Ne;-Tres inMeReised PrmFesulTizeDefe transf atHEVRIETutting TemDrilli-64ialsfuresri e FEM, 12th International ConferTres inMechanics of M, Xi'oto,eijin,1996ictheory. Prmodeach Stional Corie For i0091616-621 1, 2010.
  • Seluer0 09
e td="e/tr="e2table> e : 20 e body> e html>