LEM3

UMR CNRS 7239
UdL
CNRS
A&M

                          
Annuaire du laboratoire LEM3
Fiche individuelle
LI Nianlian

Doctorant - Département 3 T-PRIOM

Téléphone : +33 (0)3-72-74-78-22 Bureau : 022-R+1 (LEM3)
Fax : E-mail : nianlian.li@univ-lorraine.fr


Thèse en cours au LEM3

Etude du contact dynamique et de sa dégradation dans des composants de véhicules automobiles, approche expérimentale et modélisation micromécanique

Spécialité : Sciences et technologie industrielles
Type de contrat :
Ecole doctorale : C2MP
Directeur : CHEVRIER Pierre



Derniers Articles (triés par Type puis Année)
  • L.Weiss, A.Tazibt, M.Aillerie and A.Tidu, Surface and microstructure modifications of Ti-6Al-4V titanium alloy cutting by a water jet/high power laser converging coupling, Materials Research Express, 5 (2018) 016528 ACL
  • S. BERBENNI, V. TAUPIN, Fast Fourier Transform-based micromechanics of interfacial line defects in crystalline materials, Journal of Micromechanics and Molecular Physics (2018) accepted (Oct. 2, 2018) ACL
  • S. Gupta, V. Taupin, C. Fressengeas, M. Jrad, Geometrically nonlinear field fracture mechanics and crack nucleation, Application to strain localization fields in Al-Cu-Li aerospace alloys, Materials 11, 498 (2018). ACL
  • F. BEN SAADA, Z. ANTAR, K. ELLEUCH, P. PONTHIAUX, N. GEY, The effect of nanocrystallized surface on the tribocorrosion behavior of 304L stainless steel, Wear, 394-395 (2018), 71-79 ACL
  • T.A. Lebedkina, Y. Bougherira, D. Entemeyer, M.A. Lebyodkin, I.V. Shashkov, Crossover in the scale-free statistics of acoustic emission associated with the Portevin-Le Chatelier instability, Scripta Mater. 148 (2018) 47-50. ACL
  • S. Khamseh, E. Alibakhshi,  M. Mahdavian, M.R. Saeb, H. Vahabi, N. Kokanyane, P. Laheurte ; Magnetron-sputtered copper/diamond-like composite thin films with super anti-corrosion properties, Surface and Coatings Technology Vol 333, 15 January 2018, Pages 148–157 ACL
  • Tikarrouchine, E., Chatzigeorgiou, G., Praud, F., Piotrowski, B., Chemisky, Y., Meraghni, F.: Three-dimensional method for the simulation of non-linear, rate-dependent response of composite structures. Composite Structures 193 (2018) 165-179. Doi: https://doi.org/10.1016/j.compstruct.2018.03.072 ACL
  • X.Y. Sun, C. Fressengeas, V. Taupin, P. Cordier and N. Combe, Disconnections, dislocations and generalized disclinations in grain boundary ledges,  Int. J. Plasticity 104, 134-146 (2018). ACL
  • J.P. OLIVEIRA, Z. ZENG,  S. BERVEILLER, D. BOUSCAUD, FM. BRAZ FERNANDES, Laser welding of Cu-Al-Be shape memory alloys: microstructure and mechanical properties, Journal of Materials and Design, 148 (2018) 145-152 ACL
  • J.P. OLIVEIRA Z. ZENG, S. BERVEILLER, D. BOUSCAUD, FM BRAZ FERNANDES, R.M. MIRANDA, Laser welding of Cu-Al-Be shape memory alloys:microstructure and mechanical properties, J. Mat. Design, 148 (2018) 145-152 ACL
  • K.S. ELOH, A. JACQUES, G. RIBARIK, S. BERBENNI. The Effect of Crystal Defects on 3D High-Resolution Diffraction Peaks: A FFT-Based Method, Materials (2018), 11, 1669; doi:10.3390/ma11091669. ACL
  • S. LHADI, S. BERBENNI, N. GEY, T. RICHETON, L. GERMAIN. Micromechanical modeling of the effect of elastic and plastic anisotropies on the mechanical behavior of beta-Ti alloys. International Journal of Plasticity, 109 (2018) 88-107. ACL
  • D. Zhemchuzhnikova, M. Lebyodkin, D. Yuzbekova, T. Lebedkina, A. Mogucheva, R. Kaibyshev, Interrelation between the Portevin Le-Chatelier effect and neckingin AlMg alloys, Intern. J. Plasticity, 110 (2018) 95-109. ACL
  • ANAGNOSTOU D, CHATZIGEORGIOU G, CHEMISKY Y, MERAGHNI F. Hierarchical Micromechanical Modeling of the Viscoelastic Behavior Coupled to Damage in SMC and SMC-Hybrid Composites. Composites Part B: Engineering. 2018; 151:8-24. ACL
  • DONG J, POMARÈDE P, CHEHAMI L, LOCQUET A, MERAGHNI F, DECLERCQ NF and CITRIN DS. Visualization of Subsurface Damage in Woven Carbon Fiber-Reinforced Composites Using Polarization-Sensitive Terahertz Imaging. NDT & E International. 2018; 99:72–79. ACL
  • CHATZIGEORGIOU G, JAVILI A, MERAGHNI F. Micromechanical method for effective piezoelectric properties and electromechanical fields in multi-coated long fiber composites. Int. Journal of Solids and Structures. 2018; (In press). https://doi.org/10.1016/j.ijsolstr.2018.09.018. ACL
  • S. LHADI, M.R. CHINI, T. RICHETON, N. GEY, L. GERMAINS. BERBENNI, Micromechanical Modeling of the Elasto-Viscoplastic Behavior and Incompatibility Stresses of β-Ti Alloys, Materials (2018), 11(7), 1227; https://doi.org/10.3390/ma11071227 ACL
  • V. S. Gornakov, I. V. Shashkov, M. A. Lebyodkin, and T. A. Lebedkina, Domain Structure and Magnetization Reversal Micromechanismsin Quasi-Two-Dimensional Exchange-Biased Nanomagnetics, Physics of the Solid State, 60(no. 11) (2018) 2222-2230. DOI: 10.1134/S1063783418110082 ACL
  • Eckel S, Meraghni F, Pomarède P and Declercq NF. Investigation of Damage in Composites Using Nondestructive Nonlinear Acoustic Spectroscopy. Experimental Mechanics. 2017; 57: 207-17. ACL
  • MAHBOOB Z, CHEMISKY Y, MERAGHNI F, BOUGHERARA H., Mesoscale modelling of tensile response and damage evolution in natural fibre reinforced laminates. Composites Part B: Engineering. 2017 ; 119: 168-83 ACL
  • Xu S., Toth L, Schuman C, Lecomte JS., Barnett M., Dislocation mediated variant selection for secondary twinning in compression of pure titanium, Acta Met, Volume 124, 1 February 2017, Pages 59–70 ACL
  • C. Schneider-Maunoury, L.Weiss, P.Acquier, D.Boisselier and P.Laheurte, Functionally graded Ti6Al4V-Mo alloy manufactured with DED-CLAD process, Additive Manufacturing, vol.17, p.55-66 5 (2017) ACL
  • H. KRIAA, A. GUITTON, N. MALOUFI, Fundamental and experimental aspects of diffraction for characterizing dislocations by electron channeling contrast imaging in scanning electron microscope, Scientific Reports, 7 (2017) 9742 ACL
  • G. Mussot-Hoinard, W. Elmay, L. Peltier, P. Laheurte, Fatigue performance evaluation of a Nickel-free titanium-based alloy for biomedical application - Effect of thermomechanical treatments, Journal of the Mechanical Behavior of Biomedical Materials, Volume 71, July 2017, Pages 32–42 ACL
  • N. Chibane, H. Ait-Amokhtar and C. Fressengeas, On the strain rate dependence of the critical strain for plastic instabilities in an Al-2.5%Mg alloy,  Scripta Mater., 130, 252-255 (2017). ACL
  • K.S. DJAKA, A. VILLANI, V. TAUPIN, L. CAPOLUNGO, S. BERBENNI, Field Dislocation Mechanics for heterogeneous elastic materials: A numerical spectral approach. Computer Methods in Applied Mechanics and Engineering 315 (2017) 921-942. ACL
  • M. SCHÖNEICH, F. DINZART, H. SABAR, S. BERBENNI, M. STOMMEL. A coated inclusion-based homogenization scheme for viscoelastic composites with interphases. Mechanics of Materials 105 (2017) 89-98. ACL
  • T. RICHETON, L.T. LE, T. CHAUVE, M. BERNACKI, S. BERBENNI, M. MONTAGNAT, Modelling the transport of geometrically necessary dislocations on slip systems: application to single- and multi-crystals of ice, Modelling and Simulation in Materials Science and Engineering, 25 (2017) 025010 (1-27) ACL
  • V. Taupin, K. Gbemou, C. Fressengeas, L. Capolungo, Nonlocal elasticity tensors in dislocation and disclination cores, J. Mech. Phys. Solids, 100, 62-84 (2017). ACL
  • S. VAN PETEGEM, A. GUITTON, M. DUPRAZ, A. BOLLHALDER, K. SOFINOWSKI, M.V. UPADHYAY, H. VAN SWYGENHOVEN, A miniaturized biaxial deformation rig for in situ mechanical testing, Exp. Mech., (2017) 1-12 ACL
  • C. DASCALU, Multiscale modeling of rapid failure in brittle solids: branching instabilities. Mechanics of Materials (2017) DOI: 10.1016/j.mechmat.2017.03.008 ACL
  • N.P. Kobelev, M. Lebyodkin, T. Lebedkina, Effect of synchronization of dislocations on the onset and kinetics of macroscopic plastic instability, Metall. Mater. Transactions A 48 (2017) 965-974. ACL
  • Shirinbayan M, Fitoussi J, Meraghni F, Surowiec B, Laribi M and Tcharkhtchi A. Coupled effect of loading frequency and amplitude on the fatigue behavior of advanced sheet molding compound (A-SMC). Journal of Reinforced Plastics and Composites. 2017; 36: 271-82. ACL
  • Chatzigeorgiou G, Meraghni F and Javili A. Generalized interfacial energy and size effects in composites. Journal of the Mechanics and Physics of Solids. 2017; 106: 257-82. ACL
  • E. BRODU, E. BOUZY, JJ. FUNDENBERGER, J. GUYON, A. GUITTON, Y. ZHANG, On-axis TKD for orientation mapping of nano crystalline materials in SEM, Mater. Charac., 130 (2017) 92-96 ACL
  • M. BEN BETTAIEBF. ABED-MERAIM, Localized necking in elastomer-supported metal layers: impact of kinematic hardening, Journal of Manufacturing Science and Engineering (2017) DOI: 10.1115/1.4035183. ACL
  • M. BEN BETTAIEB F. ABED-MERAIM, Effect of kinematic hardening on localized necking in substrate-supported metal layers, International Journal of Mechanical Sciences 123 (2017) 177-197. ACL
  • H.K. AKPAMA, M. BEN BETTAIEBF. ABED-MERAIM, Localized necking predictions based on rate-independent self-consistent polycrystal plasticity: Bifurcation analysis versus imperfection approach, International Journal of Plasticity 91 (2017) 205-237. ACL
  • H.K. AKPAMAM. BEN BETTAIEBF. ABED-MERAIM, Prediction of plastic instability in sheet metals during forming processes using the loss of ellipticity approach, Latin American Journal of Solids and Structures (2017) DOI: 10.1590/1679-78253544. ACL
  • M. BEN BETTAIEBF. ABED-MERAIM, Strain rate effects on the enhancement of localized necking in substrate-supported metal layers, The International Journal of Advanced Manufacturing Technology (2017) DOI: 10.1007/s00170-017-0344-8. ACL
  • M. BEN BETTAIEBF. ABED-MERAIM, Theoretical and numerical investigation of the impact of out-of-plane compressive stress on sheet metal formability, International Journal of Mechanical Sciences 130 (2017) 244-257. ACL
  • T. RICHETON, Incompatibility stresses and lattice rotations due to grain boundary sliding in heterogeneous anisotropic elasticity, Crystals, 7 (2017) 203 (1-14) ACL
  • Praud F, Chatzigeorgiou G, Bikard J, Meraghni F. Phenomenological multi-mechanisms constitutive modelling for thermoplastic polymers, implicit implementation and experimental validation. Mechanics of Materials. 2017;114:9-29. ACL
  • M.A. Lebyodkin, T.A. Lebedkina, I.V. Shashkov, V.S. Gornakov, Long-time spontaneous breakdown of antiferromagnet order in polycrystalline NiFe/NiO bilayers probed with acoustic emission, Appl. Phys. Lett., 111 (2017) 032407(5); doi: 10.1063/1.4994812 ACL
  • D. Zhemchuzhnikova, M. Lebyodkin, T. Lebedkina, A. Mogucheva, D. Yuzbekova, Rustam Kaibyshev, Peculiar Spatiotemporal Behavior of Unstable PlasticFlow in an AlMgMnScZr Alloy with Coarse and Ultrafine Grains, Metals, 7 (2017) 325(13). Doi: 10.3390/met7090325. ACL
  • W. ELMAY,S. BERVEILLER, E. PATOOR, T. GLORIANT, F. PRIMA, P. LAHEURTETexture evolution of orthorhombic α″ titanium alloy investigated by in situ X-ray diffraction; Materials Science & Engineering A 679 (2017) 504–510. ACL
  • Praud F, Chatzigeorgiou G, Chemisky Y, Meraghni F. Hybrid micromechanical-phenomenological modelling of anisotropic damage and anelasticity induced by micro-cracks in unidirectional composites. Composite Structures. 2017;182:223-36. ACL
  • M. BEN SAADA, N. GEY, B. BEAUSIR, X. ILTIS, H. MANSOUR, N. MALOUFI, Sub-boundaries induced by dislocational creep in uranium dioxide analyzed by advanced diffraction and channeling electron microscopy, Materials Characterization 133 (2017) 112-121 ACL
  • T. LIU, L. GERMAIN, J. TEIXEIRA, E. AEBY-GAUTIER, N. GEY, Hierarchical criteria to promote fast and selective αGB precipitation at β grain boundaries in β-metastable Ti-alloys, Acta Materialia 141 (2017) 97-108 ACL
  • A. Rusinek, R. Bernier, R.M. Boumbimba, M. Klosak, T. Jankowiak, G. Voyiadjis, New devices to capture the temperature effect under dynamic compression and impact perforation of polymers, application to PMMA,, Polymer Testing, (2017), doi: 10.1016/j.polymertesting.2017.10.015. ACL
  • C. BELLOUARD, A. DULUARD, E. SNOECK, Y. LU, B. NEGULESCU, D. LACOUR, C. SENET, S. ROBERT, N. MALOUFI, S. ANDRIEU, M. HEHN, C. TIUSAN, Metalliclike behavior of the exchange coupling in (001) Fe/MgO/Fe junctions, Phys. Rev. B 96, (2017) 134416 ACL
  • Sara Khamseh, Eiman Alibakhsha, Mohammad Mahdavian, Mohammad Reza Saeb,Henri Vahabi, Jean-Sébastien Lecomte, Pascal Laheurte, High-performance hybrid coatings based on diamond-like carbon and copper for carbon steel protection, Diamond & Related Materials 80 (2017) 84–9 ACL
  • P. Didier, B. Piotrowski, M. Fischer, P. Laheurte : Mechanical stability of custom-made implants: Numerical study of anatomical device and low elastic Young's modulus alloy ; Materials Science and Engineering: C 2017 ACL
  • M. Fischer, P. Laheurte,  P. Acquier, D. Joguet, L. Peltier, T. Petithory, K. Anselme, P. Mille : Synthesis and characterization of Ti-27.5Nb alloy made by CLAD® additive manufacturing process for biomedical applications ; Materials Science and Engineering C, Volume 75, 1 June 2017, Pages 341–348 ACL
  • P.Laheurte, L. Peltier, P. Charbonnier : ressort horlogerie Alliage de titane ß métastable, ressort d'horlogerie à base d'un tel alliage et son procédé de fabrication ; brevet France n° 17 52503 du 24.03.2017 ACL
  • G. Le Coz, M. Jrad, P. Laheurte, D. Dudzinski : Analysis of local cutting edge geometry on temperature distribution and surface integrity when dry drilling of aeronautical alloys ;  The International Journal of Advanced Manufacturing Technology (2017) ACL
  • Julien O. Fadonougbo, Jin-Yoo Suh, Cheol-Hwee Shim, Gyeung-Ho Kim, Eric Fleury, Young Whan Cho, Nanometer-scale phase separation and formation of delta ZrH2 in Cu-Zr binary amorphous alloys, Journal of Alloys and Compounds 721 (2017) 646-652 ACL
  • R. MATADI BOUMBIMBA, K. WANG, E. HABLOT, N. BAHLOULI, S. AHZI, L. AVEROUS, Renewable biocomposites based on cellulose fibers and dimer fatty acid polyamide: Experiments and modeling of the stress–strain behaviour, Polymer Engineering and Science, 57, issue 1 (2017) 95-104. ACL
  • H. Vahabi, C. Vagner, Q. Lin, M. Cochez, M. Ferriol, P. Laheurte, Investigation of thermal stability and flammability of PMMA composites by combination of APP with ZrO2, Sepiolite or MMTPolymer Degradation and Stability ; Polymer Degradation and Stability, 124, 2016, 60–67 ACL
  • M. BEN HAJ SLAMA, N. GEY, L. GERMAIN, J.C.HELL, K. ZHU, S. ALLAIN, ‘Fast Granularization of lath−like Bainite in FeNiC Alloys during Isothermal Holding at Ms+20°C, Metall and Mat. Trans. A 47 (2016) 15-18 ACL
  • Yan Beygelzimer, Roman Kulagin, Laszlo S. Toth, Yulia Ivanisenko, The self-similarity theory of high pressure torsion, Beilstein J. Nanotechnol. 7 (2016) 1267–1277. ACL
  • Abdelkader Saoula, Sid Ahmed Meftah, Foudil Mohri, El Mostafa Daya Lateral buckling behaviour of box beam elements under combined axial and bending loads. Journal of Constructional Steel Research 116 (2016) 141–155 ACL
  • V. Taupin, J. Chevy, C. Fressengeas, Effects of grain-to-grain interactions on shear strain localization in Al-Cu-Li alloys, Int. J. Solids Structures, 99, 71-81 (2016). ACL
  • M.V. Upadhyay, L. Capolungo, V. Taupin, C. Fressengeas, R. Lebensohn, A couple stress elasto-viscoplastic model using fast Fourier transforms: role of lattice curvatures on mechanical response of nanocrystalline metals,  Int. J. Plasticity, 83, 126-152 (2016). ACL
  • DESPRINGRE N, CHEMISKY Y, BONNAY K, MERAGHNI F. (2016) Micromechanical modeling of damage and load transfer in particulate composites with partially debonded interface. Composite Structures 2016;155:77–88. ACL
  • X.Y. Sun, V. Taupin, P. Cordier, C. Fressengeas and B.B. Karki, Influence of pressure on dislocation, disclination and g-disclination structures of a {310}/[001] tilt grain boundary in MgO, J. Mat. Research. 1–7, DOI: 10.1557/jmr.2016.346 (2016). ACL
  • Ali Brara, Ahmed Brara, Ali Daouadji, Abderahim Bali, El mostafa Daya. Dynamic properties of dense sand-rubber mixtures with small particles size ratio. European Journal of Environmental and Civil Engineering. (2016) 1-15. ACL
  • FREDERIC DRUESNE, MOHAMED HAMDAOUI, PASCAL LARDEUR, EL MOSTAFA DAYA, VARIABILITY OF DYNAMIC RESPONSES OF FREQUENCY DEPENDENT VISCO-ELASTIC SANDWICH BEAMS WITH MATERIAL AND PHYSICAL PROPERTIES MODELED BY SPATIAL RANDOM FIELDS,COMPOSITE STRUCTURES 152 (2016) 316-323 ACL
  • K.E.K. AMOUZOU, T. RICHETON, A. ROTH, M. LEBYODKIN, T.A. LEBEDKINA, Micromechanical modeling of hardening mechanisms in commercially pure alpha-titanium in tensile condition, International Journal of Plasticity, 80 (2016) 222-240. ACL
  • K. Lougou, H. Boudaoud, E.M. Daya and L. Azrar. Vibration modeling of large repetitive sandwich structures with viscoelastic core.  Mechanics of Advanced Materials and Structures, 23(4) 2016 458-466. ACL
  • F. XU, M. POTIER-FERRY. A multi-scale modeling framework for instabilities of film/substrate systems. Journal of the Mechanics and Physics of Solids, 86: 150-172, 2016. ACL
  • J. GUYON, A. HAZOTTE, E. BOUZY, Evolution of metastable alpha phase during heating of Ti48Al2Cr2Nb intermetallic alloy, Journal of Alloys and Compounds, 656 (2016) 667-675 ACL
  • J. GUYON, A. HAZOTTE, F. WAGNER, E. BOUZY, Recrystallization of coherent nanolamellar structures in Ti48Al2Cr2Nb intermetallic alloy, Acta Materialia, 103 (2016) 672-680 ACL
  • J. FAVRE, D. FABREGUE, K. YAMANAKA, A. CHIBA, Modeling dynamic recrystallization of L-605 cobalt superalloy, Materials Science and Engineering: A 653 (2016) 84-92 ACL
  • X.Y. Sun, V. Taupin, C. Fressengeas and P. Cordier, Continuous description of the atomic structure of a grain boundary using dislocations and generalized-disclination density fields, Int J. Plasticity, 77, 75-89 (2016). ACL
  • R. DINGREVILLE, S. BERBENNI, On the interaction of solutes with grain boundaries, Acta Materialia, 104 (2016) 237-249 ACL
  • Roman Kulagin, Yajun Zhao, Yan Beygelzimer, Laszlo S. Toth, Michail Shtern, Modeling strain and density distributions during high pressure torsion of pre-compacted powder materials, Materials Research Letters, (2016) DOI:10.1080/21663831.2016.1241318. ACL
  • M. El Hachemi, Y. Koutsawa, H. Nasser, G. Giunta, A. Daouadji, E.M. Daya , S. Belouettar. An Intuitive Computational Multiscale Methodology and Tool for the Dynamic Modelling and Simulation of Heterogeneous Composite Structures. Composite Structures 144 (2016) 131-137. ACL
  • Li Li,  Tamas Ungar, Laszlo S Toth, Werner Skrotzki, Yan D Wang, Yang Ren, Hahn Choo, Zsolt Fogarassy,  Xing T Zhou,  Peter K Liaw, Shear-Coupled Grain Growth and Texture Development in a Nanocrystalline Ni-Fe Alloy during Cold Rolling, Metallurgical Transactions47 (2016) 6632-6644, DOI 10.1007/s11661-016-3753-7. ACL
  • F. XU, M. POTIER-FERRY. On axisymmetric/diamond-like mode transitions in axially compressed core-shell cylinders. Journal of the Mechanics and Physics of Solids, 94: 68-87, 2016. ACL
  • L. CHENG, JS LI, XY XUE, B. TANG, HC KOU, E. BOUZY, Superplastic deformation mechanisms of high Nb containing TiAl alloy with (alpha2+gamma) microstructure, Intermetallics, 75 (2016) 62-71 ACL
  • C. Fressengeas, V. Taupin, A field theory of strain/curvature incompatibility for coupled fracture and plasticity, International journal of solids and structures 82 (2016) 16–38.  ACL
  • J. O. FADONOUGBO, J.-Y. SUH, S. HAN, C.-H. SHIM, G.-H. KIM, M.-H. KIM, E. FLEURY, Y. W. CHO, Hydrogen-induced decomposition of Cu–Zr binary amorphous metallic alloys. J. Alloys Compd. 660 (2016) 456–460. ACL
  • H.K. AKPAMAM. BEN BETTAIEBF. ABED-MERAIM, Numerical integration of rate-independent BCC single crystal plasticity models: comparative study of two classes of numerical algorithms, International Journal for Numerical Methods in Engineering (2016) DOI: 10.1002/nme.5215. ACL
  • Y. BOUKTIR, H. CHALAL, M. HADDAD, F. ABED-MERAIM, Investigation of ductility limits based on bifurcation theory coupled with continuum damage mechanics, Materials and Design, 90 (2016) 969-978. ACL
  • CHATZIGEORGIOU G, CHARALAMBAKIS N, CHEMISKY Y and MERAGHNI F. Periodic homogenization for fully coupled thermomechanical modeling of dissipative generalized standard materials (2016) International Journal of Plasticity, Volume 81, 2016, Pages 18–39. Doi: 10.1016/j.ijplas.2016.01.013 ACL
  • X. Wei, M. Hattab, P. Bompard, J.-M. Fleureau. Highlighting some mechanisms of crack formation and propagation in clays on drying path. Géotechnique, (on line) (2016) :1-14; doi:10.1680/jgeot.14.p.22. ACL
  • J. M. Cadou, F. Boumediene, Y. Guevel, G. Girault, L. Duigou, E.M. Daya, M. Potier-Ferry. A high order reduction-correction method for Hopf bifurcation in fluids and for viscoelastic vibration. Computational Mechanics 57 (2) 2016 305-324. ACL
  • M. POTIER-FERRY, F. MOHRI, F. XU, N. DAMIL, B. BRAIKAT, K. MHADA, H. HU, Q. HUANG, S. NEZAMABADI. Cellular instabilities analyzed by multi-scale Fourier series: A reviewDiscrete and Continuous Dynamical Systems – Series S, 9(2): 585-597, 2016. ACL
  • Mohamed Hamdaoui · Komlan Akoussan · El Mostafa Daya.Comparison of non-linear eigensolvers for modal analysis of frequency dependent laminated visco-elastic sandwich plates. Finite Elements in Analysis and Design 121(2016)75-85. ACL
  • W.Z. Zhong, I.A. Mbarek, A. Rusinek, R. Bernier, T. Jankowiak, G. Sutter, Development of an experimental set-up for dynamic force measurements during impact and perforation, coupling to numerical simulations, International Journal of Impact Engineering, 91 (2016) 102–115. ACL
  • A Novel Strong and Ductile TWIP/Martensite Steel Composite, By: Bouaziz, O.; Masse, J. P.; Petitgand, G.; Huang, M. X.,ADVANCED ENGINEERING MATERIALS  Volume: 18  Issue: 1  Pages: 56-59  Published: JAN 2016 ACL
  • Bending properties of functionally graded 300M steels, By: Roumina, R.; Bruhis, M.; Masse, J. P.; Zurob, H. S.; Jain, M.; Bouaziz, O.; Embury, J. D.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 653  Pages: 63-70  Published: JAN 20 2016 ACL
  • Light iron and hard magnesium nanocomposites,By: Gorsse, S.; Prakasam, M.; Couillaud, S.; Bouaziz, O.; Bobet, J-L.; Bellanger, P.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 651  Pages: 987-990  Published: JAN 10 2016 ACL
  • S. MSOLLI, M. BEN BETTAIEB, F. ABED-MERAIM, Combined effect of damage and plastic anisotropy on the ductility limit of thin metal sheets, Procedia Structural Integrity 2 (2016) 3577-3584. ACL
  • L.S. Toth, C.F. Gu, B. Beausir, J.J. Fundenberger, M. Hoffman,  Geometrically necessary dislocations favor the Taylor uniform deformation mode in ultra-fine-grained polycrystals, Acta Materialia, 117 (2016) 35-42. ACL
  • H.K. AKPAMAM. BEN BETTAIEBF. ABED-MERAIM, Influence of the yield surface curvature on the forming limit diagrams predicted by crystal plasticity theory, Latin American Journal of Solids and Structures, 13 (2016) 1250-1269. ACL
  • Dimitris Chatziathanasiou, Yves Chemisky, George Chatzigeorgiou, Fodil Meraghni Modeling of coupled phase transformation and reorientation in shape memory alloys under non-proportional thermomechanical loading. International Journal of Plasticity. 2016; 82: 192-224. ACL
  • X.Y. Sun, P. Cordier, V. Taupin, C. Fressengeas and S. Jahn, Continuous description ofa grain boundary in forsterite from atomic scale simulations: the role of disclinations, Phil.Mag. 96, 1757-1772 (2016). ACL
  • C. DASCALU, Dynamic localization of damage and microstructural length influence, Int. J. Damage Mechanics, in press, 2016. ACL
  • Hadj Youzera , Sid Ahmed Meftah , El Mostafa Daya  Superharmonic resonance of cross-ply laminates by the method of multiple scales. Journal of Computational and Nonlinear Dynamics Accepted 2016 ACL
  • L. CHENG, JS LI, XY XUE, B. TANG, HC KOU, E. BOUZY, General features of high temperature deformation kinetics for gamma-TiAl-based alloys with DP/NG microstructures, Mat. Sc. Eng. A, 678 (2016), 389-401. ACL
  • J. Martin, A. Martinavicius, S. Bruyère, H.P. Van Landeghem, C. Gendarme, F. Danoix, R. Danoix, A. Redjaimia, T. Grosdidier, T. Czerwiec, Multiscale analysis of an ODS FeAl40 intermetallic after plasma-assisted nitriding, Journal of Alloys and Compounds, 683 (2016) pp. 418-426 ACL
  • M. Novelli, J-J Fundenberger, P. Bocher, T. GrosdidierOn the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature, Applied Surface Science, 389 (2016), pp. 1169-1174 ACL
  • M. Mondet, E. Barraud, S. Lemonnier, J. Guyon, N. Allain, T. Grosdidier, Microstructure and mechanical properties of AZ91 magnesium alloy developed by Spark Plasma Sintering, Acta Materiallia, 119 (2016), pp. 55-67 ACL
  • Subrata Panda, Laszlo S. Toth, Jean-Jacques Fundenberger, Olivier Perroud, Julien Guyon, Jianxin X. Zou, Thierry Grosdidier, Heterogeneities in strain and microstructure in aluminum alloy and magnesium processed by high pressure torsion, Materials Characterization, accepted, 2016.  ACL
  • H.K. AKPAMAM. BEN BETTAIEBF. ABED-MERAIM, Prediction of Localized Necking Based on Crystal Plasticity: Comparison of Bifurcation and Imperfection Approaches, Key Engineering Materials 716 (2016) 779-789. ACL
  • R. Sonnier, L. Dumazert, S. Livi, T. K. Ly Nguyen, J. Duchet-Rumeau, H. Vahabi, P. Laheurte : Flame retardancy of phosphorus-containing ionic liquid based epoxy networksOriginal Research Article Polymer Degradation and Stability, Volume 134, December 2016, Pages 186-193 ACL
  • Jing Wen, Nathalie Allain, E. FLEURY, Hydrogen evolution and its effects on cold rolling behavior in commercial pure titanium, Materials Characterization 121 (2016) 139–14 ACL
  • I. TIBA, T. RICHETON, C. MOTZ, H. VEHOFF, S. BERBENNI, Incompatibility stresses at grain boundaries in Ni bicrystalline micropillars analyzed by an anisotropic model and slip activity, Acta Materialia, 83 (2015) 227-238. ACL
  • X. Liu, Y. Zhang, B. Beausir, F. Liu, C. Esling, F. Yu, X. Zhao, L. Zuo, Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al-12.7%Si alloys investigated by SEM/EBSD, Acta Mater., 97 (2015) 338-347. ACL
  • A. Molinari, N. Jacques, S. Mercier, J.B Leblond, AA. Benzerga, A micromechanical model for the dynamic behavior of porous media in the void coalescence stage INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES,  71 (2015)   ,1-18. ACL
  • H. CHALAL, F. ABED-MERAIM, Hardening effects on strain localization predictions in porous ductile materials using the bifurcation approach, Mechanics of Materials, 91 Part 1 (2015) 152-166. ACL
  • Kodjo Attipou, Heng Hu , Foudil Mohri , Michel Potier-Ferry, Salim Belouettar, Thermal wrinkling of thin membranes using a Fourier-related double scale approach. Thin-WalledStructures 94 2015 532–544 ACL
  • S. BERBENNI, L. CAPOLUNGO, A Mori-Tanaka homogenization scheme for non-linear elasto-viscoplastic heterogeneous materials based on translated fields: an affine extension. Comptes Rendus Mecanique, 343 (2015), 95-106 ACL
  • EL MAI S., MERCIER S., PETIT J., MOLINARI A., An extension of the linear stability analysis for the prediction of multiple necking during dynamic extension of round bar, International Journal of Solids and Structures, 2015 ACL
  • SARTORI C., MERCIER S., JACQUES N., MOLINARI A., Constitutive behavior of porous ductile materials accounting for micro-inertia and void shape, Mechanics of Materials, 2015 ACL
  • JACQUES N., MERCIER S., MOLINARI A., A constitutive model for porous solids taking into account microscale inertia and progressive void nucleation, Mechanics of Materials, 2015 ACL
  • C. MAREAU, S. BERBENNI, An affine formulation for the self-consistent modeling of elasto-viscoplastic heterogeneous materials based on the translated fields method, International Journal of Plasticity, 64 (2015) 134-150 ACL
  • S. BERBENNI, F. DINZART, H. SABAR. A new internal variables homogenization scheme for linear viscoelastic materials based on an exact Eshelby interaction law. Mechanics of Materials, 81 (2015) 110-124. ACL
  • T. RICHETON, I. TIBA, S. BERBENNI, O. BOUAZIZ, Analytical expressions of incompatibility stresses at Sigma3 <111> twin boundaries and consequences on single slip promotion parallel to twin plane, Philosophical Magazine, 95 (2015) 12-31. ACL
  • D.А. Zhemchuzhnikova, M.A. Lebyodkin, T.A. Lebedkina, R.O. Kaibyshev, Unusual behavior of the Portevin-Le Chatelier effect in an AlMg alloy containing precipitates, Mater. Sci. Eng. A, 639 (2015) 37–41. ACL
  • F. XU, M. POTIER-FERRY, S. BELOUETTAR, H. HU. Multiple bifurcations in wrinkling analysis of thin films on compliant substrates. International Journal of Non-Linear Mechanics, 76: 203-222, 2015. ACL
  • M. HUMBERT, L. GERMAIN, N. GEY, E. BOUCARD, Evaluation of the orientation relations from misorientation between inherited variants: Application to ausformed martensite, Acta Mater, 82 (2015), 137-144 ACL
  • J. GUYON, H. MANSOUR, N. GEY, M.A. CRIMP, S. CHALAL, N. MALOUFI, Sub-Micron Resolution Selected Area Electron Channeling Patterns, Ultramicroscopy, 149  (2015) 34-44 ACL
  • K. Akoussan, H. Boudaoud, E-M. Daya, E. Carrera, Vibration Modeling of Multilayer Composite Structures with Viscoelastic Layers, Mechanics of Advanced Materials And Structures, 22 (2015) 136-149 ACL
  • Nima Pardis, Cai Chen, Laszlo S Toth, Chengfan GuBenoît Beausir, Lembit Kommel, Microstructure, texture and mechanical properties of cyclic expansion-extrusion deformed pure copper, Mat. Sci. Eng. A, 628 (2015) 423-432. ACL
  • B. Yang, Y. Zhang, Z.B. Li, G. Qin, C. Esling, X. Zhao, L. Zuo, Crystallographic orientation of modulated martensite in epitaxially grown Ni-Mn-Ga thin film, Thin Solid Films, 584 (2015) 90-93. ACL
  • S. Wang, Y. Zhang, C. Schuman, J.-S. Lecomte, X. Zhao, L. Zuo, M.-J. Philippe, C. Esling, Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests, Acta Mater., 82 (2015) 424-436. ACL
  • G. S. Duan, B. L. Wu, X. H. Du, G. Zhao, Y. D. Zhang, X. Zhao, L.Zuo, C. Esling, The microstructure evolution in AZ31B alloy during multi-pass cold rolling to a high reduction, Mater. Sci. Eng. A, 620 (2015) 120-128. ACL
  • X. H. Du, M. Hong, G. S. Duan, C. B. Wei, E. P. Jiang, M. Zhang, B. L. Wu, Y. D. Zhang, C. Esling, Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy, Int. J. Mater. Res., 106 (2015) 15-21. ACL
  • X.-H. Du, M. Hong, G.-S. Duan, B.-L. Wu, Y.-D. Zhang, C. Esling, Preparation of sound ribbons with submicrometer-grained microstructure on a Mg-Zn alloy, Sci. B., 60 (2015) 570-573. ACL
  • K. Yu, H. Hu, H. Tang, G. Giunta, M. Potier-Ferry, S. Belouettar, A novel two-dimensional finite element to study the instability phenomena of sandwich plates, Computer Methods In Applied Mechanics And Engineering, 283 (2015) 1117-1137 ACL
  • J. Yang, Q. Huang, H. Hu, G. Giunta, S. Belouettar, M. Potier-Ferry, A new family of finite elements for wrinkling analysis of thin films on compliant substrates, Composite Structures, 119 (2015) 568-577. Available online doi:10.1016/j.compstruct.2014.09.040 ACL
  • M. BEN BETTAIEB, F. ABED-MERAIM, Investigation of localized necking in substrate-supported metal layers: Comparison of bifurcation and imperfection analyses, International Journal of Plasticity, 65 (2015) 168-190. ACL
  • S. BAHI, G. LIST, G. SUTTER, Analysis of adhered contacts and boundary conditions of the secondary shear zone, Wear  (2015), pp. 608-617. DOI: 10.1016/j.wear.2015.01.016 ACL
  • Czarnota C., Koné F., Haddag B., Nouari M., A predictive hybrid modeling in turning: application to stainless steel dry machining with a coated groove tool, The International Journal of Advanced Manufacturing Technology 79, 65-79, 2015 - http://dx.doi.org/10.1007/s00170-015-6801-3 ACL
  • CHATZIGEORGIOU G., CHEMISKY Y., and MERAGHNI F., Computational Micro to Macro Transitions for Shape Memory Alloy Composites Using Periodic Homogenization.” Smart Materials and Structures, Vol. 24(3), (2015), p.35009. ACL
  • S. BAHI, G. List, G. Sutter, Modeling of friction along the tool-chip interface in Ti6Al4V alloy cutting. International Journal of Advanced Manufacturing Technology. (2015) ACL
  • M. Hamdaoui, F.Druesne, E.M.DayaVariability analysis of frequency dependent visco-elastic three-layered beams, Composite Structures (2015), doi:10.1016/j.compstruct.2015.05.011. ACL
  • A.M. DOBROVAT, C. DASCALU, S. HALL, Computational modeling of damage based on microcrack kinking, Int. J. Multiscale Comput. Engng. 13 (2015) 201-217.  ACL
  • A. WRZESNIAK, C. DASCALU, P. BESUELLE, A two-scale time dependent model of damage: Influence of micro-crack friction, Eur. J. Mech.- A/Solids, 49 (2015) 345-361. ACL
  • D. TSALIS, G. CHATZIGEORGIOU, C. TSAKMAKIS, N. CHARALAMBAKIS, Dissipation inequality-based periodic homogenization of wavy materials, Compos. Part B-Eng., 76 (2015) 89-104. ACL
  • P. WANG, H. CHALAL, F. ABED-MERAIM, Efficient solid–shell finite elements for quasi-static and dynamic analyses and their application to sheet metal forming simulation, Key Engineering Materials, 651-653 (2015) 344-349. ACL
  • K.S. DJAKA, V. TAUPIN, S. BERBENNI, C. FRESSENGEAS, A numerical spectral approach to solve the dislocation density transport equation, Modelling and Simulation in Materials Science and Engineering, 23, 065008 (2015) ACL
  • D. BARBIER, L. GERMAIN, A. HAZOTTE, M. GOUNE, A. CHBIHI, Microstructures resulting from the interaction between ferrite recrystallization and austenite formation in Dual-Phase steel, J Mater Sci 50 (2015) 374–381 ACL
  • Y. Cong, S. Nezamabadi, H. Zahrouni, J. Yvonnet.  Multiscale computational homogenization of heterogeneous shells at small strains with extensions to finite displacements and buckling. International Journal for Numerical Methods in Engineering  (2015) Published online in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/nme.4927 ACL
  • A Tchalla, WL Azoti, Y Koutsawa, A Makradi, S Belouettar, H Zahrouni. Incremental mean-fields micromechanics scheme for non-linear response of ductile damaged composite materials. Composites Part B: Engineering 69, 169-180. 2015 ACL
  • A. Timesli, B. Braikat, H. Lahmam, H. Zahrouni, A new algorithm based on Moving Least Square method to simulate material mixing in friction stir welding, Engineering Analysis with Boundary Elements 50, 372-380. 2015 ACL
  • S. MSOLLI, H. BADREDDINE, C. LABERGERE, M. MARTINY, G. ROBIN, M. JRAD, K. SAANOUNI, F. CHOQUART, Experimental characterization and numerical prediction of ductile damage in forming of AA1050-O sheets, International Journal of Mechanical Sciences., 99 (2015) 262-273.
    ACL
  • Ghedjati Khadoudja, Fleury Eric, Hamani Mohamed Seghir, Benchiheub Mostefa, Bouacha Khaider, Bolle Bernard, Elaboration of AlSi10Mg casting alloys using directional solidification processing INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2015, vol. 22, pp. 509-515 ACL
  • P. Acquier, S. Lemonnier, N. Allain-Bonnasso, A. Rusinek, T. Grosdidier, E. Barraud, Development of the Dynamic Compaction Resistance Sintering (DCRS): A new process for powder consolidation combining electric current and dynamic loading JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, vol. 216, pp. 447-454 ACL
  • P. Castany, A. Ramarolahy, F. Prima, P. Laheurte, C. Curfs, T. Gloriant ; In situ synchrotron X-ray diffraction study of the martensitic transformation in superelastic Ti-24Nb-0.5N and Ti-24Nb-0.5O alloys, Acta Materialia 88 (2015) 102-11. ACL
  • T. SHANMUGASUNDARAM, J. GUYON, J.P. MONCHOUX, A. HAZOTTEE. BOUZY, On grain refinement of a gamma-TiAl alloy using cryo-milling followed by spark plasma sintering, Intermetallics, 66 (2015) 141-148 ACL
  • CHATZIATHANASIOU D, CHEMISKY Y, MERAGHNI F, CHATZIGEORGIOU G, AND PATOOR E, Phase Transformation of Anisotropic Shape Memory Alloys: Theory and Validation in Superelasticity, Shape Memory and Superelasticity, 1 (2015), pp. 359-74. ACL
  • Chemisky YMeraghni F, Bourgeois N, Cornell S, Echchorfi R, Patoor E. Analysis of the deformation paths and thermomechanical parameter identification of a shape memory alloy using digital image correlation over heterogeneous tests. International Journal of Mechanical Sciences. 2015;96–97:13-24. ACL
  • Hossain M, Chatzigeorgiou G, Meraghni F, Steinmann P. A multi-scale approach to model the curing process in magneto-sensitive polymeric materials. International Journal of Solids and Structures. 2015;69–70:34-44. ACL
  • F. XU, Y. KOUTSAWA, M. POTIER-FERRY, S. BELOUETTAR. Instabilities in thin films on hyperelastic substrates by 3D finite elements. International Journal of Solids and Structures, 69-70: 71-85, 2015. ACL
  • K. HALDAR, G. CHATZIGEORGIOU, D. C. LAGOUDAS, Single crystal anisotropy and coupled stability analysis for variant reorientation in Magnetic Shape Memory Alloys, Eur. J. Mech. A-Solid, 54 (2015) 53-73. ACL
  • V. Taupin, L. Capolungo, C. Fressengeas, M. Upadhyay, B. Beausir, A mesoscopic theory of dislocation and disclination fields for grain boundary mediated plasticity, Int. J. Solids and Structures, 71, 277-290 (2015). ACL
  • H. MANSOUR, M.A. CRIMP, N. GEY, N. MALOUFIAccurate electron channeling contrast analysis of a low angle sub-grain boundary, Scripta Materialia 109 (2015) 76-79 ACL
  • F. KPEKY, H. BOUDAOUD, F. ABED-MERAIM, E.M. DAYAModeling of viscoelastic sandwich beams using solid–shell finite elements, Composite Structures, 133 (2015) 105-116. ACL
  • A. GUITTON, A. IRASTORZA-LANDA, R. BROENNIMANN, D. GROLIMUND, S. VAN PETEGEM, H. VAN SWYGENHOVEN, Picosecond pulsed laser ablation for microscale sample preparation, Mater. Lett., 160 (2015) 589-591 ACL
  • K. GOURIET, P. CARREZ, P. CORDIER, A. GUITTON, A. JOULAIN, L. THILLY, C. TROMAS, Dislocations modelling in Ti2AlN MAX phase based on the Pierls-Nabarro model, Philos. Mag., 95 (2015) 2539–2552 ACL
  • ACHOUR N, CHATZIGEORGIOU G, MERAGHNI F, CHEMISKY Y, FITOUSSI J. Implicit implementation and consistent tangent modulus of a viscoplastic model for polymers. International Journal of Mechanical Sciences, 103 (2015), pp. 297-305. ACL
  • M. Montagnat, T. Chauve, F. Barou, A. Tommasi, B. Beausir and C. Fressengeas, Analysis of dynamic recrystallization of ice from EBSD orientation mappings, Frontiers in Earth Science, 3:81. doi: 10.3389/feart.2015.00081 (2015) ACL
  • P.-A. JUAN, C. PRADALIER, S. BERBENNI, R.J. McCABE, C.N. TOME, L. CAPOLUNGO, A statistical analysis of the influence of microstructure and twin-twin junctions on twin nucleation and twin growth in Zr, Acta Materialia, 95 (2015) 399-410 ACL
  • D. FERDIAN, C. JOSSE, P. NGUYEN, N. GEY, N. RATEL−RAMOND, P. DE PARSEVAL, Y. THEBAULT, BENOIT MALARD, J. LACAZE, and L. SALVO, Chinese Script vs Plate−Like Precipitation of Beta−Al9Fe2Si2 Phase in an Al−6.5Si−1Fe Alloy, Metallurgical and Materials Transactions  A,  46A-6 (2015) 2814−2818. ACL
  • Ruslan Z. Valiev, Yuri Estrin, L.S. Toth, T.C. Lowe, Bulk Nanostructured Materials, Guest Editor for Special Issue: Advanced Engineering Materials, vol 17 (2015). ACL
  • Irene Beyerlein, John S Carpenter, Abigail Hunter, Laszlo S Toth, Werner Skrotzki, " Nano-enabled orientation alignment via extreme shear strains", Scripta Materialia 98 (2015) 52-55. ACL
  • J. Fan, J. Li, H. Kou, K. Hua, B. Tang, Y. Zhang. Influence of solution treatment on microstructure and mechanical properties of a near beta titanium alloy Ti-7333, Materials & Design 83, (2015) 499-507. ACL
  • A. MOUFKI, D. DUDZINSKIG. LE COZ, Prediction of cutting forces from an analytical model of oblique cutting, application to peripheral milling of Ti-6Al-4V alloy, Int. J. of Advanced Manufacturing Technology, (2015) 1-12. ACL
  • H.K. AKPAMA, M. BEN BETTAIEB, F. ABED-MERAIM, A comparative study of forming limit diagrams predicted by two different plasticity theories involving vertex effect, Key Engineering Materials, 651-653 (2015) 21-26. ACL
  • K. SOHO, X. LEMOINE, F. ABED-MERAIM, H. ZAHROUNI, Investigation of the effect of temper rolling on the texture evolution and mechanical behavior of IF steels using multiscale simulation, International Journal of Material Forming, (2015) DOI:10.1007/s12289-015-1257-4. ACL
  • Acquier P., Lemonnier S., Allain-Bonnasso N., Rusinek A., Grosdidier T., Barraud E., Development of the Dynamic Compaction Resistance Sintering (DCRS): A new process for powder consolidation combining electric current and dynamic loading, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 216, p. 447-454, 2015 ACL
  • Grosdidier, T., Fundenberger, J. J., Zou J.X., Pan, Y. C., Zeng X. Q., Nanostructured Mg based hydrogen storage bulk materials prepared by high pressure torsion consolidation of arc plasma evaporated ultrafine powders, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 40, p. 16985-16991, 2015 ACL
  • L. Maire, L. Faure, S. Philippon, M. Novelli, G. Marcos, T. Czerwiec, T. Grosdidier, Influence of Duplex USSP/Nitriding Surface Treatments on the Dry Sliding Behavior of Ti6Al4 V/AISI 316L Tribopairs, Procedia Engineering, vol. 114, pp. 621–626, 2015

    ACL
  • T. Grosdidier, G. Berrio-Marine, V.A.. Munoz-Cuartas, A. Tidu, A. Tazibt, Modification, Ablation and Hardening of Metallic Surfaces by a Cryogenic Nitrogen Jet, Procedia Engineering, vol. 114, pp. 506–513, 2015 ACL
  • M. Hattab, T. Hammad, J-M. Fleureau, Internal friction angle variation in a Kaolin/Montmorillonite clay mix and microstructural identification. Géotechnique. 65 (2015), N°1, 1-11. ACL
  • B.T. Lester, T. Baxevanis, Y. Chemisky, D.C. Lagoudas, Review and perspectives: shape memory alloy composite systems, Acta Mechanica, 226 (2015), 3907-3960 ACL
  • R. NAKHOUL, P. MONTMITONNET, M. POTIER-FERRY,  Multi-scale method modeling of thin sheet buckling under residual stresses in the context of strip rolling,  International Journal of Solids and Structures, 66, pp 62-76, 2015 ACL
  • Q. HUANG, H. HU, K. YU, M. POTIER-FERRY, S. BELOUETTAR, N. DAMIL, Macroscopic simulation of membrane wrinkling for various loading cases, International Journal of Solids and Structures, 64–65, pp 246-258, 2015 ACL
  • S. Abdelkhalek, H. Zahrouni, N. Legrand, M. Potier-Ferry,  Post-buckling modeling for strips under tension and residual stresses using Asymptotic   Numerical Method, International Journal of Mechanical Sciences, 104, pp 126–137, 2015  ACL
  • Wang Shiying, Zhang Yudong, Schuman Christophe, Lecomte Jean-Sébastien, Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests, ACTA MATERIALIA, Volume: 82, (2015) Pages: 424-436 ACL
  • J. ARTOZOUL, C. LESCALIER, D. DUDZINSKI, Experimental and analytical combined thermal approach for local tribological understanding in metal cutting, Applied Thermal Engineering, 89, (2015), 394-404. ACL
  • M. KPENYIGBA, T. JANKOWIAC, A. RUSINEK, R.PESCI, Effect of projectile nose shape on ballistic resistance of Interstitial-Free steel sheets, Int. J. Imp. Eng., 79 (2015) 83-94 ACL
  • G. GU, R. PESCI, L. LANGLOIS, E. BECKER, R. BIGOT, In situ microstructure observation of steel grades in the semi-solid state for thixoforging process by using confocal laser scanning microscopy, Sol. Sta. Phen., 217-218 (2015) 15-22 ACL
  • Fracture behaviour of a Fe-22Mn-0.6C-0.2V austenitic TWIP steelBy: Lorthios, Julie; Maziere, Matthieu; Lemoine, Xavier; Cugy, Philippe; Besson, Jacques; Gourgues-Lorenzon, Anne-Francoise,INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES  Volume: 101  Pages: 99-113  Published: OCT 2015 ACL
  • Implementation of a damage evolution law for dual-phase steels in Gurson-type models, By: Balan, Tudor; Lemoine, Xavier; Maire, Eric; Habraken, Anne-Marie,MATERIALS & DESIGN  Volume: 88  Pages: 1213-1222  Published: DEC 25 2015 ACL
  • Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite,By: Khoddam, S.; Estrin, Y.; Kim, H. S.; Bouaziz, O.,MATERIALS & DESIGN  Volume: 85  Pages: 404-411  Published: NOV 15 2015 ACL
  • Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography, By: Fabregue, Damien; Landron, Caroline; Bouaziz, Olivier; Maire, Eric,STEEL RESEARCH INTERNATIONAL  Volume: 86  Issue: 10  Pages: 1197-1203  Published: OCT 2015 ACL
  • Damage and fracture of dual-phase steels: Influence of martensite volume fraction, By: Lai, Q.; Bouaziz, O.; Goune, M.; Brassart, L.; Verdier, M.; Parry, G.; Perlade, A.; Brechet, Y.; Pardoen, T.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 646  Pages: 322-331  Published: OCT 14 2015 ACL
  • Effect of viscosity on cavity growth in ductile damage, By: Fabregue, D.; Bouaziz, O.; Maire, E.,MECHANICS OF MATERIALS  Volume: 89  Pages: 169-175  Published: OCT 2015 ACL
  • Microstructure refinement of dual-phase steels with 3.5 wt% Mn: Influence on plastic and fracture behavior, By: Lai, Q.; Bouaziz, O.; Goune, M.; Perlade, A.; Brechet, Y.; Pardoen, T.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 638  Pages: 78-89  Published: JUN 25 2015 ACL
  • Towards the microstructure design of DP steels: A generic size-sensitive mean-field mechanical model,By: Allain, S. Y. P.; Bouaziz, O.; Pushkareva, I.; Scott, C. P.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 637  Pages: 222-234  Published: JUN 18 2015 ACL
  • Characterization and modeling of mechanical behavior of quenching and partitioning steels,By: Arlazarov, A.; Bouaziz, O.; Masse, J. P.; Kegel, F.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 620  Pages: 293-300  Published: JAN 3 2015 ACL
  • W.Z.ZHONG, A.RUSINEK, T.JANKOWIAK, F.ABED, R.BERNIER, G.SUTTER, influence of interfacial friction and specimen configuration in Split Hopkinson Pressure Bar system, Tribology International, 90 (2015) 1-14. ACL
  • W. CHEN, O. MAUREL, C. LA BORDERIE, T. REESS, A. DE FERRON, M. MATALLAH, G. PIJAUDIER-CABOT, A. JACQUES, F. REY-BETHBEDER, Experimental and numerical study of shock wave propagation in water generated by pulsed arc electrohydraulic discharges, Heat Mass Transfer, 50 (2014) 673–684. ACL
  • P.-A. JUAN, S. BERBENNI, M.R. BARNETT, C.N. TOME, L. CAPOLUNGO, A double inclusion homogenization scheme for polycrystals with hierarchical topologies: application to twinning in Mg alloys, International Journal of Plasticity, 60 (2014), 182-196 ACL
  • H. MANSOUR, J. GUYON, M.A. CRIMP, N. GEY, B. BEAUSIR, N. MALOUFI, Accurate electron channeling contrast analysis of dislocations in fine grained bulk materials. Scripta Materialia 84-85 (2014) 11-14 ACL
  • C. Fressengeas and V. Taupin, A field theory of distortion incompatibility for coupled fracture and plasticity, J. Mech. Phys.Solids, 68, 45-65 (2014). ACL
  • A. CHBIHI, D. BARBIER, L. GERMAIN, A. HAZOTTE, M. GOUNE, Interactions between ferrite recrystallization and austenite formation in high strength steels, J. Mater. Science 49 (2014) 3608-3621 ACL
  • M. Soltani , B. Asgarian, F.Mohri Finite element method for stability and free vibration analyses of non-prismatic thin-walled beams. Thin-walled structures, 01/2014; 82:245–261 ACL
  • C.F. GU, L.S. TOTH, M. HOFFMAN, Twinning effects in a polycrystalline magnesium alloy under cyclic deformation, Acta Mater., 62 (2014) 212–224. ACL
  • Dmitry Orlov, Rimma Lapovok, Laszlo S. Toth, Ilana B. Timokhina, Peter D. Hodgson, Arunansu Haldar, Debashish Bhattacharjee, Asymmetric rolling of interstitial-free steel using differential roll diameters, Part II: Microstructure and annealing effects, Metallurgical Transactions A, 2014, 45:447-454, DOI 10.1007/s11661-013-1958-6. ACL
  • S. BERBENNI,  F. WAGNER, N. ALLAIN-BONASSO. On the roles of grain size dispersion and microscale Hall-Petch relation on the plastic behaviour of polycrystalline metals. Materials Transactions - The Japan Institute of Metals and Materials (special Issue: Strength of Fine Grained Materials - 60 Years of Hall-Petch) 55 (2014), 39-43. ACL
  • T. RICHETON, S. BERBENNI, From bicrystals to spherical inclusions: A superposition method to derive analytical expressions of stress fields in presence of plastic strain gradients. International Journal of Solids and Structures, 51 (2014) 794-807 ACL
  • V. Taupin, L. Capolungo and C. Fressengeas, Disclination mediated plasticity in shear-coupled boundary migration, Int. J. Plasticity, 53, 179-192 (2014). ACL
  • P. Cordier, S. Demouchy, B. Beausir, V. Taupin, F. Barou and C. Fressengeas, Disclinations provide the missing mechanism for deforming olivine-rich rocks in the mantle, Nature, 507, 51–56, doi:10.1038/nature13043 (2014). ACL
  • Halila F., Czarnota C., Nouari M., New stochastic wear law to predict the abrasive flank wear and tool life in machining process, Journal of Engineering Tribology 228, 2014 - http://dx.doi.org/10.1177/1350650114521405 ACL
  • MERAGHNI F, CHEMISKY Y, PIOTROWSKI B, ECHCHORFI R, BOURGEOIS N, PATOOR E. Parameter identification of a thermodynamic model for superelastic shape memory alloys using analytical calculation of the sensitivity matrix. European Journal of Mechanics - A/Solids (2014) 45, 226-237. ACL
  • Laszlo S. Toth, Chengfan Gu, Ultrafine-grain metals by severe plastic deformation, A tutorial review, Materials Characterization,  http://dx.doi.org/10.1016/j.matchar.2014.02.003 ACL
  • C. Fressengeas, V. Taupin and L. Capolungo, Continuous modeling of the structure of tilt boundaries, Int. J. Solids and Structures, 51, 1434-1441 (2014). ACL
  • B. Piotrowski, A.A. Baptista, E.Patoor, P. Bravetti, A. Eberhardt, P. Laheurte,Interaction of bone-dental implant with new ultra low modulus alloy using a numerical approach,,MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS  Volume: 38  Pages: 151-160  Published: MAY 1 2014 ACL
  • C.F. Gu, L.S. Toth, S. Rusz, M. Bova, Texture induced grain coarsening in severe plastic deformed low carbon steel , Scripta Materialia, 86 (2014) 36-39.  ACL
  • F. XU, H. HU, M. POTIER-FERRY, S. BELOUETTAR. Bridging techniques in a multi-scale modeling of pattern formation. International Journal of Solids and Structures, 51(18): 3119-3134, 2014. ACL
  • K. KPOGAN, M. POTIER-FERRY, Buckling of long thin plates under residual stresses with application to strip rolling, Key Eng. Mat.,611 (2014) 221-230 ACL
  • K. KPOGAN, Y. TAMPANGO, H. ZAHROUNI, M. POTIER-FERRY, H. BEN DHIA, Computing flatness defects in sheet rolling by arlequin and asymptotic numerical methods, Key Eng. Mat., 611 (2014) 186-193 ACL
  • K. KPOGAN, H. ZAHROUNI, M. POTIER-FERRY, H. BEN DHIA, Flatness defects in sheet rolling modelised by Arlequin and Asymptotic Numerical Methods, 11th World Congress on Computational Mechanics (WCCM XI) & 5th European Conference on Computational Mechanics (ECCM V), Barcelona, Spain, July 20-25, 2014 ACL
  • F. XU, M. POTIER-FERRY, S. BELOUETTAR, Y. CONG. 3D finite element modeling for instabilities in thin films on soft substrates. International Journal of Solids and Structures, 51(21-22): 3619-3632, 2014. ACL
  • Min-Hyun Kim, Mukta R. Debnath, Young-Im Wang, Jin-Yoo Suh, Eric Fleury, and Do-Hyang Kim, Effect of Co on the Degradation of the Hydrogen Permeability of Ni-Nb-Zr Amorphous Membranes, Metals & Materials International, Vol. 20, No. 2 (2014), pp. 215-219 ACL
  • J. FAVRE, D. FABREGUE, E. MAIRE, A. CHIBA, Grain growth and static recrystallization kinetics in Co-20Cr-15W-10Ni (L-605) cobalt-base superalloy, Philosophical Magazine (2014), doi: 10.1080/14786435.2014.903342 ACL
  • T.A. Lebedkina, M.A. Lebyodkin, T.T. Lamark, M. Janecek, Y. Estrin, Effect of equal channel angular pressing on the Portevin-Le Chatelier effect in an Al3Mg alloy, Mater. Sci. Eng. A 615 (2014) 7-13. ACL
  • SALAHOUELHADJ A., MARTINY M., MERCIER S., BODIN L., MANTEIGAS D., STEPHAN B., Reliability of thermally stressed rigid-flex printed circuit boards for High Density Interconnect applications, Microelectronics reliability, 2014, vol. 54, pp. 204-213 ACL
  • MOLINARI A., MERCIER S., JACQUES N., Dynamic Failure of Ductile Materials, Procedia IUTAM, 2014, vol. 10, pp. 201-220 ACL
  • SU S., STAINIER L., MERCIER S., Energy-based variational modeling of fully formed adiabatic shear bands, European Journal of Mechanics - A/Solids, 2014 ACL
  • R. DINGREVILLE, M. HALLIL, S. BERBENNI, From coherent to incoherent mismatched interfaces: a generalized continuum formulation of surface stresses. Journal of the Mechanics and Physics of Solids, 72 (2014) 40-60. ACL
  • S. BERBENNI, V. TAUPIN, K.S. DJAKA, C. FRESSENGEAS, A numerical spectral approach for solving elasto-static field dislocation and g-disclination mechanics. International Journal of Solids and Structures,  51 (2014), 4157-4175 ACL
  • G. Sutter, G. List, J.J. Arnoux, A. Rusinek, Finite element simulation for analysing experimental friction tests under severe conditions. Finite Elements in Analysis and Design 85 (2014), 50–58. ACL
  • J.J. Arnoux, G. Sutter, G. List, P. Bourson, H. Chaynes, Raman characterization of Ti–6Al–4V oxides and thermal history after kinetic friction. Phase Transitions, 87 (2014) 1–12. ACL
  • B. KIM, E. BOUCARD, T.SOURMAIL, D. SAN MARTIN, N. GEY, PEJ. RIVERA-DIAZ-DEL-CASTILLO, The influence of silicon in tempered martensite: Understanding the microstructure-properties relationship in 0.5-0.6 wt.% C steels, Acta Mater.  68-15 (2014) 169-178 ACL
  • Mukta Rani Debnath a, Hye-Jung Chang b, Eric Fleury, Effect of group 5 elements on the formation and corrosion behavior of Ti-based BMG matrix composites reinforced by icosahedral quasicrystalline phase, Journal of Alloys and Compounds 612 (2014) 134-142 ACL
  • Halila F., Czarnota C., Nouari M., A new abrasive wear law for the sticking and sliding contacts when machining metallic alloys, Wear 315, 125-135, 2014 - http://dx.doi.org/10.1016/j.wear.2014.03.013 ACL
  • S. I. Bozhko, V. Taupin, M. Lebyodkin (Lebedkin), C. Fressengeas, E. A. Levchenko, K. Radikan, O. Luebben, V. N. Semenov, and I. V. Shvets, Disclinations in C60 molecular layers on WO2/W(110) surfaces, Phys. Rev. B, 90 (2014) 214106(9). ACL
  • M. Soltani , B. Asgarian, F.Mohri Elastic instability and free vibration analyses of tapered thin-walled beams by the power series method. Journal of Constructional Steel Research, 96 (2014) 106–126 ACL
  • Irene Beyerlein, John S Carpenter, Abigail Hunter, Laszlo S Toth, Werner Skrotzki, Nano-enabled orientation alignment via extreme shear strains, Scripta Materialia, (2014) doi:10.1016/j.scriptamat.2014.10.032.   ACL
  • N. Pardis, C. Chen, M. Shahbaz, R. Ebrahimi, L.S. Toth, Development of new routes of severe plastic deformation through cyclic expansion-extrusion process, Mater. Sci. Eng. A. 613 (2014) 357-364. ACL
  • C.F. Gu, L.S. Toth, Y.D. Zhang, M. Hoffman, Unexpected brass-type texture in rolling of ultrafine-grained copper, Scripta Mater., 92 (2014) 51-54. ACL
  • L. GERMAIN, D. KRATSCH, M. SALIB, N. GEY, Identification of sub-grains and low angle boundaries beyond the angular resolution of EBSD maps, Materials Characterization, 98 (2014), 66-72 ACL
  • Czarnota C., Kowalczyk-Gajewska K., Salahouelhadj A., Martiny M., Mercier S., Modeling of the cyclic behavior of elastic-viscoplastic composites by the additive tangent Mori-Tanaka approach and validation by finite element calculations, International Journal of Solids and Structures 56-57, 2015 - http://dx.doi.org/10.1016/j.ijsolstr.2014.12.00205 ACL
  • J.X. Zou, C.F. Pérez-Brokate, R. Arruffat, B. Bolle, J.J. Fundenberger, X.Q. Zeng, T. Grosdidier, W.J. Ding, Nanostructured bulk Mg + MgO composite synthesized through arc plasma evaporation and high pressure torsion for H-storage application, Mater. Sci. Eng., B183 (2014) 1-5. ACL
  • L. Li, Z. Li, Y. Zhang, C. Esling, H. Liu, Z. Zhao, Q. Zhu, Y. Zuo, J. Cui, Crystallographic effect of a high magnetic field on a solidified hypoeutectic Zn-Al alloy, J. Appl. Cryst., 47 (2014) 606-612. ACL
  • T. P. Hou, Y. Li, Y. D. Zhang, K. M. Wu, Magnetic Field-Induced Precipitation Behaviors of Alloy Carbides M2C, M3C, and M6C in a Molybdenum-Containing Steel, Metall. Mater. Trans. A, 45A (2014) 2553-2561. ACL
  • Z. Li, Bo. Yang, Y. Zhang, C. Esling, N. Zou, X. Zhao, L. Zuo, Crystallographic insights into the intermartensitic transformation in Ni-Mn-Ga alloys, Acta Mater., 74 (2014) 9-17. ACL
  • Z. Li, Y. Zhang, C. Esling, W. Gan, N. Zou, X. Zhao, L. Zuo, In-situ neutron diffraction study of martensitic variant redistribution in polycrystalline Ni-Mn-Ga alloy under cyclic thermo-mechanical treatment, Appl. Phys. Lett., 105 (2014) 021907. ACL
  • Z. B. Li, Y. D. Zhang, C. F. Sanchez-Valdes, J. L. S Sanchez Llamazares, C. Esling, X. Zhao, L. Zuo, Giant magnetocaloric effect in melt-spun Ni-Mn-Ga ribbons with magneto-multistructural transformation, Appl. Phys. Lett., 104 (2014) 044101. ACL
  • G. S. Duan, B. L. Wu, X. H. Du, X. Zhao, Y. D. Zhang, L. Zuo, C. Esling, Nanostructured extension twins in rapidly compressed Mg-3.0Al-1.0Zn alloy, Mater. Sci. Eng. A, 614 (2014) 75-80. ACL
  • G. S. Duan, B. L. Wu, X. H. Du, X. Zhao, Y. D. Zhang, L. Zuo, C. Esling, The cyclic frequency sensitivity of low cycle fatigue (LCF) behavior of the AZ31B magnesium alloy, Mater. Sci. Eng. A, 603 (2014) 11-22. ACL
  • N. Damil, M. Potier-Ferry, H. Hu, Membrane wrinkling revisited from a multi-scale point of view, Advanced Modeling and Simulation in Enginering Sciences, 1:6, 2014 ACL
  • X. H. Du, G. S. Duan, M. Hong, D. P. Wang, B. L. Wu, Y. D. Zhang, C. Esling, Effect of V on the microstructure and mechanical properties of Mg-10Er-2Cu alloy with a long period stacking ordered structure, Mater. Lett., 122 (2014) 312-314. ACL
  • A. Tri, H. Zahrouni, M. Potier-Ferry, Bifurcation indicator based on meshless and asymptotic numerical methods for nonlinear Poisson problem, Numerical Methods for Partial Differential Equations, 30 (2014) 978-993 ACL
  • G. FRANZ, F. ABED-MERAIM, M. BERVEILLER, Effect of microstructural and morphological parameters on the formability of BCC metal sheets, Steel Research International, 85 (2014) 980-987. ACL
  • D. DAVYDOV, E. VOYIATZIS, G. CHATZIGEORGIOU, S. LIU, P. STEINMANN, M. C. BÖHM, F. MÜLLER-PLATHE, Size Effects in a Silica-Polysterene Nanocomposite: Molecular Dynamics and Surface-enhanced Continuum Approaches, Soft Mater., 12 (2014) S142-S151. ACL
  • G. CHATZIGEORGIOU, A. JAVILI, P. STEINMANN, Unified magnetomechanical homogenization framework with application to magnetorheological elastomer, Math. & Mech. of Solids, 19:2 (2014) 193-211. ACL
  • Y. CHEMISKY, G. CHATZIGEORGIOU, P. KUMAR, D. C. LAGOUDAS, A constitutive model for cyclic actuation of high-temperature shape memory alloys, Mech. Mater., 68 (2014) 120-136.
    ACL
  • F. ABED-MERAIM, R.H.J. PEERLINGS, M.G.D. GEERS, Bifurcation analysis versus maximum force criteria in formability limit assessment of stretched metal sheets, International Journal of Applied Mechanics, 6(6) (2014) 27 pp. ACL
  • L.Z. MANSOURI, H. CHALAL, ABED-MERAIM, Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis, Mechanics of Materials, 76, (2014) 64-92. ACL
  • F. ABED-MERAIM, T. BALAN, G. ALTMEYER, Investigation and comparative analysis of plastic instability criteria: application to forming limit diagrams, International Journal of Advanced Manufacturing Technology, 71(5-8) (2014) 1247-1262. ACL
  • P. Laheurte, W. Elmay, F. Prima, T. Gloriant ; Titane et alliages / Des matériaux de choix pour les applications médicales, les Techniques de l'Ingénieur, 2014, référence M4781. ACL
  • A. Ramalohary, P. Castany, P. Laheurte, F. Prima, T. Gloriant ; Superelastic property induced by low temperature heating of a shape memory Ti-24Nb-0.5Si biomedical alloy, Scripta Materalia, Volume 88, 1 October 2014, Pages 25-28 ACL
  • A. GUITTON, A. JOULAIN, L. THILLY, C. TROMAS, Evidence of dislocation cross-slip in MAX phase deformed at high temperature, Sci. Rep., 4 (2014) 6358 ACL
  • J. RUIZ-VARGAS, N. SIREDEY-SCHWALLER, P. NOYREZ, S. MATHIEU, P. BOCHER, N. GEY, Potential and limitations of microanalysis SEM techniques to characterize borides in brazed Ni-based superalloys,Materials Characterization 94 (2014) 46-57 ACL
  • Y.-D LIU*, Q. JANG, Y. WANG, A. TIDU, L.  ZUO, Goss Texture Evolution of Grain Oriented Silicon Steel by High-Energy X-ray Diffractio, Acta Metallurgica Sinica-English Letters , 27 ,3  pp. 530-533  ( 2014) ACL
  • G. CHASAING, L. FAURE, S. PHILIPPON*, M. COULIBALY, A. TIDU, P. CHEVRIER, J. MERIAUX, Sliding velocity effects on dry friction in severe conditions for a Ti6Al4V tribopair, Wear, 320, 25–33 (2014) ACL
  • L. Bao, C. Schuman, Q. Le, J.-S. Lecomte, Z. Zhang, M.-J. Philippe, J. Cui, C. Esling, A novel method for predicting variant selection during primary, secondary and tertiary twinning in titanium, Materials Letters 132 (2014) 162-166. ACL
  • X. Li, Y. Fautrelle, A. Gagnoud, G. Cao, Y. Zhang, Z. Ren, X. Lu, C. Esling, High magnetic field induction of the formation of twinned dendrites during directional solidification of Al-4.5wt%Cu alloy, Philosophical Magazine Letters, 94 (2014) 118-126. ACL
  • D. BOUSCAUD, A. MORAWIEC, R. PESCI,  S. BERVEILLER, E. PATOOR, Strain resolution of scanning electron microscopy based Kossel microdiffraction, Journal of Applied Crystallography, 47(2014) 1699-1707 ACL
  • G. LE COZ,  D. DUDZINSKI,  Temperature variation in the workpiece and in the cutting tool when dry milling Inconel 718, Int. J. of Advanced Manufacturing Technology, 74(5-8) (2014), 1133-1139. ACL
  • Zou, J. X., Perez-Brokate C. F., Arruffat, R., Zou, J. X., Perez-Brokate C.F., Perez-Brokate, C. F., Arruffat, R., Bolle B. Fundenberger J. J., Zeng X. Q., Grosdidier T., Ding, W.J., Nanostructured bulk Mg plus MgO composite synthesized through arc plasma evaporation and high pressure torsion for H-storage application, MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 183, p.1-5, 2014 ACL
  • M. POTIER-FERRY,  Instabilités multi-échelles, journée scientifique du Laboratoire de Recherches Commun CEA/UTT COSINUS, Troyes, 18 décembre 2014.   ACL
  • M. POTIER-FERRY, Méthodes sans maillage et développements de Taylor, Séminaire, Montpellier, 13 novembre 2014. ACL
  • M. POTIER-FERRY, N. DAMIL, H. HU, Multi-scale Fourier-related approaches of wrinkling,  The 17th U. S. National Congress on Theoretical and Applied Mechanics,  June 15-20, 2014, Michigan State University, East Lansing, Michigan.

    ACL
  • M. POTIER-FERRY, Multi-scale Instabilities, Multiscale Materials Modeling: Mathematical and Computational Aspects, 7th US – France Symposium, Rensselaer Polytechnic Institute, 10-11 juin 2014.

    ACL
  • M. POTIER-FERRY, Instabilités multi-échelles, Colloque en l’honneur d’Alain Cimetière, La Rochelle, 15-16 mai 2014. ACL
  • K. Kpogan, H. Zahrouni, M. Potier-Ferry, H. Ben Dhia, Buckling of rolled thin sheets under residual stresses by Arlequin method, International Journal of Material Forming, in press, 2014 ACL
  • J. ARTOZOUL, C. LESCALIER, O. BOMONT, D. DUDZINSKI, Extended infrared thermography applied to orthogonal cutting: Mechanical and thermal aspects, Applied Thermal Engineering, 64 (2014), 441-452. ACL
  • T. JANKOWIAC, A. RUSINEK, M. KPENYIGBA, R.PESCI,Ballistic behavior of steel sheet subjected to impact and perforation, Steel Comp. Struc., 16 (2014) 595-609 ACL
  • G. GU, R. PESCI, L. LANGLOIS, E. BECKER, R. BIGOT, M. GUO, Microstructure observation and quantification of the liquid fraction of M2 steel grade in the semi-solid state combining confocal laser scanning microscopy and X-ray microtomography, Acta Mater., 66 (2014) 118-131 ACL
  • Y. Chemisky, G. Chatzigeorgiou, P. Kumar, D.C. Lagoudas, A constitutive model for cyclic actuation of high-temperature shape memory alloys, Mechanics of Materials 68 (2014), 120-136 ACL
  • Improvement of Superelastic Performance of Ti-Nb Binary Alloys for Biomedical Applications, By: Elmay, W.; Patoor, E.; Gloriant, T.; Prima, F.; Laheurte, P.,JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE  Volume: 23  Issue: 7  Special Issue: SI  Pages: 2471-2476  Published: JUL 2014 ACL
  • Evolution of microstructure and strength during the ultra-fast tempering of Fe-Mn-C martensitic steels, By: Massardier, V.; Goune, M.; Fabregue, D.; Selouane, A.; Douillard, T.; Bouaziz, O.,JOURNAL OF MATERIALS SCIENCE  Volume: 49  Issue: 22  Pages: 7782-7796  Published: NOV 2014 ACL
  • Analytical Model of the Unbending Behavior of Corrugated Reinforcements,By: Fraser, Mark; Zurob, Hatem; Wu, Peidong; Bouaziz, Olivier,ADVANCED ENGINEERING MATERIALS  Volume: 16  Issue: 7  Pages: 872-877  Published: JUL 2014 ACL
  • The influence of microstructure and composition on the plastic behaviour of dual-phase steels, By: Pierman, A. -P.; Bouaziz, O.; Pardoen, T.; Jacques, P. J.; Brassart, L.,ACTA MATERIALIA  Volume: 73  Pages: 298-311  Published: JUL 2014 ACL
  • The Bauschinger effect in drawn and annealed nanocomposite Cu-Nb wires, By: Badinier, G.; Sinclair, C. W.; Allain, S.; Bouaziz, O.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 597  Pages: 10-19  Published: MAR 12 2014 ACL
  • An Original Way for Producing a 2.4 GPa Strength Ductile Steel by Rolling of Martensite, By: Masse, Jean-Philippe; Chehab, Bechir; Zurob, Hatem; Zurob, Hatem; Embury, David; Wang, Xian; Bouaziz, Olivier,ISIJ INTERNATIONAL  Volume: 54  Issue: 1  Pages: 235-239  Published: 2014 ACL
  • J. GUYON, A. HAZOTTE, J.P. MONCHOUX, E. BOUZY, Effect of powder state on Spark Plasma Sintering of TiAl alloys. Intermetallics 34 (2013) 94-100 ACL
  • J. FAVRE, Y. KOIZUMI, A. CHIBA, D. FABREGUE, E. MAIRE, Deformation behavior and dynamic recrystallization of biomedical Co-Cr-W-Ni (L-605) alloy, Metallurgical and Materials Transactions A  44  (6)  PP. 2819 - 2830 (2013), doi: 10.1007/s11661-012-1602-x  ACL
  • J. FAVRE, D. FABREGUE, D. PIOT, N. TANG, Y. KOIZUMI, E. MAIRE, A. CHIBA, Modeling grain boundary motion and dynamic recrystallization in pure metals, Metallurgical and Materials Transactions A  44  (13)  PP. 5861 - 5875 (2013), doi: 10.1007/s11661-013-1914-5  ACL
  • J. FAVRE, D. FABREGUE, A. CHIBA, Y. BRECHET, Nucleation of recrystallization in fine-grained materials: An extension of the Bailey-Hirsch criterion, Philosophical Magazine Letters  93  (11)  PP. 631 - 639 (2013), doi: 10.1080/09500839.2013.833352 ACL
  • B. GOUBAULT DE BRUGIERE, F. MARION, M. FENDLER, V. MANDRILLON, A. HAZOTTE, M. VOLPERT, H. RIBOT, Electro-mechanical studies of micro tube insertion into Al-Cu pads for 10μm pitch interconnection technology and 3D applications, Microelectronic Engin., 107 (2013) 84-90 ACL
  • S. BERBENNI, B. PALIWAL, M. CHERKAOUI. A micromechanics-based model for shear-coupled grain boundary migration in bicrystals. International Journal of Plasticity 44 (2013), 68-94
    ACL
  • Chamat A., Aden-Ali S., Gilgert J., Petit E.J., Nasri K., Abbadi M., Azari Z.  Crack behaviour in Zinc coating and at the interface of zinc / hot-dipped galvanized TRIP steel. Eng. Fract. Mech. 114 (2013) 12-25. ACL
  • B. Beausir and C. Fressengeas, Disclination densities from EBSD orientation mapping, Int. J. Solids and Structures, 50, 137-146 (2013). ACL
  • B. Asgarian, M. Soltani, F. Mohri Lateral-torsional buckling of tapered thin-walled beams with arbitrary cross sections. Thin-Walled Structures, 62(2013)96–108 ACL
  • S.A. Meftah , F. Mohri and E.M. Daya, Seismic behavior of RC coupled shear walls with strengthened coupling beams by bonded thin composite plates. KSCE Journal of Civil Engineering (2013) 17(2):403-414, Springer ACL
  • F. Mohri, N. Damil, M. Potier-Ferry. Buckling and lateral buckling interaction in thin-walled beam-column elements with mono-symmetric cross sections. Applied Mathematical Modeling. 37, pp 3526–3540, 2013 ACL
  • MARGUERES Ph., MERAGHNI F., Damage induced anisotropy and stiffness reduction evalution in composite materials using ultrasonic wave transmission: Composites Part A: Applied Science & Manufacturing, Vol. 45, (2013), pp. 134-144. ACL
  • Dmitry Orlov, Arnaud Pougis, Rimma Lapovok, Laszlo S. Toth, Ilana B. Timokhina, Peter D. Hodgson, Arunansu Haldar, Debashish Bhattacharjee, Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I: Mechanical properties and deformation textures, Metallurgical Transactions,  44 (2013) 4346-4359. ACL
  • K. Attipou, S. Nezamabadi, E.M. Daya, H. Zahrouni, A multiscale approach for the vibration analysis of heterogeneous materials : Apllication to passive damping, Journal of Sound and Vibration, Volume 332, Issue 4, Pages 725-739, 2013. ACL
  • C. PATAPY, M. HUGER, T. CHOTARD, R. GUINEBRETIERE, N. GEY,  M. HUMBERT, A. HAZOTTE, Solidification structure in pure zirconia liquid molten phase, Journal of the European Ceramic Society, 33 (2013) 259–268 ACL
  • R. PIQUARD, A. D'ACUNTO, P. LAHEURTE, D. DUDZINSKI,  Micro-end milling of NiTi biomedical alloys, burr formation and phase transformation, Precision Engineering, 2013 38 2014, 356-364 ACL
  • Daouadji, A., Hicher, P.Y., Jrad, M., Sukumaran, B., and, Belouettar S., (2013) “Experimental and numerical investigation of diffuse instability in granular materials using a micro-structural model” Géotechnique,  63(5): 368-381  DOI: 10.1680/geot.10.P.121. ACL
  • Khadri Y., Tekili S., Daya E. M., Daouadji A., Guenfoud M., Merzoug B., (2013) Dynamic analysis of train-bridge system and riding comfort of trains with rail irregularities, Journal of Mechanical Science and Technology, 27(4)951-962. ACL
  • Wan, R.; Pinheiro, M.; Daouadji, A.; Jrad, M.; Darve, F. (2013), “Diffuse instabilities with transition to localization in loose granular materials”, International Journal for Numerical and Analytical Methods in Geomechanics, 37(10): 1292–1311, DOI: 10.1002/nag.2085. ACL
  • Khadri Y., Tekili S., Daya E. M., Daouadji A., Guenfoud M., Merzoug B., (2013) Effects of rail joints and train's critical speed on the dynamic behavior of bridges, Mechanika, 19(1): 46-52 ACL
  • W. Elmay, P. Laheurte, E. Patoor, T. Gloriant, F. Prima; Improvement of Superelastic Performance of Ti-Nb Binary Alloys for Biomedical Applications: Journal of Materials Engineering and Performance, 2013, 163-165. ACL
  • V. Taupin, L. Capolungo, C. Fressengeas, A. Das and M. Upadhyay, grain boundary modelling using an elasto-plastic theory of dislocation and disclination fields, J. Mech. Phys. Solids, 61, 370-384 (2013). ACL
  • V. TAUPIN, R. PESCI, S. BERBENNI, S. BERVEILLER, R. OUAHAB, O. BOUAZIZ. Lattice strain measurements using synchrotron diffraction to calibrate a micromechanical modeling in a ferrite–cementite steel, Mat. Sci. Eng. A, 561 (2013), 67-77
    ACL
  • A. Ayad, F. Wagner, N. Rouag, A.D. Rollet, Accelerated Potts model for grain growth - Application to an IF steel, Computational Materials Sci.ence, 68, p. 189-197, 2013 ACL
  • L.S. TOTH, C.F. GU,  Modeling of disorientation axis distribution in severely deformed copper, Scripta Materialia, 69 (2013) 183–186. ACL
  • T. RICHETON, S. BERBENNI. Effects of heterogeneous elasticity coupled to plasticity on stresses and lattice rotations in bicrystals: A field dislocation mechanics viewpoint. European Journal of Mechanics - A/Solids, 37 (2013) 231-247 ACL
  • K. Yu, H. Hu, S. Chen, S. Belouettar, M. Potier-Ferry, Multi-scale techniques to analyze instabilities in sandwich structures, Composite Structures, 96, pp 751–762, 2013 ACL
  • G. Sutter, J. J. Arnoux, G. List, P. Bourson, S. Margueron, H. Chaynes, Analysis of high friction conditions of Ti-6Al-4V on tantalum by Raman spectroscopy and X-ray fluorescence, Tribology International, 57 (2013), 86-91. ACL
  • G. Sutter, G. List, Very High Speed Cutting of Ti-6AL-4V Titanium Alloy - Change in morphology and mechanism of chip formation, International Journal of Machine Tools and Manufacture, 66 (2013), 37-43. ACL
  • G. List, G. Sutter, XF Bi, A. Molinari, A. Bouthiche, Strain, strain rate and velocity fields determination at very high cutting speed, Journal of Material Processing Technology, 213 (2013), 693-699. ACL
  • A. ARLAZAROV, O. BOUAZIZ, A. HAZOTTE, M. GOUNE, S. ALLAIN, Characterization and modeling of manganese effect on strength and strain hardening of martensitic carbon steels, ISIJ Int., 53 (2013) 1076–1080 ACL
  • M. BENGHERSALLAH, L. BOULANOUAR, G. LE COZ, D. DUDZINSKI, Dry high speed milling of nickel-based superalloy, Mechanics 19 (2) (2013), 223-228 ACL
  • Somjeet Biswas, Benoît Beausir, Laszlo S. Toth, Satyam Suwas, Evolution of texture and microstructure during hot torsion of a magnesium alloy, Acta Materialia 61 (2013) 5263-5277. ACL
  • M.V. Upadhyay, L. Capolungo, V. Taupin and C. Fressengeas, Elastic constitutive laws for incompatible crystalline media: the contributions of dislocations, disclinations and G-disclinations, Phil. Mag. 93, 7, 794-832 (2013). ACL
  • Abdelrahmane Bekaddour Benyamina, Sid Ahmed Meftah, Foudil Mohri, El Mostafa Daya. Analytical solutions attempt for Lateral Torsional Buckling od doubly symmetric web-tapered I beams. (2013) Engineering Structures, (2013) 17(2) 403-414 ACL
  • A. Pougis, S. Philippon, R. Massion, L. Faure, J-J. Fundenberger, L.S. Toth, Dry friction of steel under high pressure in quasi-static conditions, Tribology International, 67 (2013) 27-35. ACL
  • Werner Skrotzki, Andy Eschke, Bertolan Jonas, Tamas Ungar, Laszlo S. Toth; Yulia Ivanisenko; Lydia Kurmanaeva, New experimental insight into the mechanisms of nanoplasticity, Acta Mater. 61 (2013) 7271-7284. ACL
  • Lei Bao, Yudong Zhang, Christophe Schuman, Jean-Sébastien Lecomte, Marie-Jeanne Philippe, Xiang Zhao Claude Esling, Multiple twinning in pure hexagonal close-packed titanium, J. Appl. Cryst.,46 (2013) 1397–1406 ACL
  • M.A. Lebyodkin, I.V. Shashkov, T.A. Lebedkina, K. Mathis, P. Dobron,F. Chmelik, Role of superposition of dislocation avalanches on the statistics of acoustic emission during plastic deformation, Phys. Rev. E 88 (2013) 042402(1-8) ACL
  • P.L. Bonanno, S. Gautier, Y. El Gmili, T. Moudakir, A.A. Sirenko, A.Kazimirov, Z.H. Cai, J. Martin, W.H. Goh, A Martinez, A. Ramdane, L. Le Gratiet, N. MALOUFI, M.B. Assouar, A. Ougazzaden, Nondestructive mapping of chemical composition and structural qualities of group III-nitride nanowires using submicron beam synchrotron-based X-ray diffraction,Thin Solid Films 541 (2013), pp 46-50 ACL
  • G. List, G. Sutter, J.J Arnoux, Analysis of the high speed sliding interaction between titanium alloy and tantalum. Wear, 301 (2013), 663–670. ACL
  • Young-Im Wang, Jin-Yoo Suh, Young-Su Lee, Jae-Hyeok Shim, Eric Fleury, Young Whan Cho, Seong-Ung Koh, Direct measurement of hydrogen diffusivity through Pd-coated Ni-based amorphous metallic membranes, Journal of Membrane Science 436 (2013) 195-201 ACL
  • M. SALIB, J. TEIXEIRA, L. GERMAIN, N. GEY, E. AEBY-GAUTIER, Influence of transformation temperature on microtexture formation associated with alpha precipitation at beta grain boundaries in a beta metastable titanium alloy, Acta Materialia, 61-10 (2013) 3758-3768 ACL
  • Halila F., Czarnota C., Nouari M., Statistical Approach for Modeling Abrasive Tool Wear and Experimental Validation when Turning the Difficult to Cut Titanium Alloys Ti6Al4V, Materials Science Forum 763, 65-90, 2013 - http://dx.doi.org/10.4028/www.scientific.net/MSF.763.65 ACL
  • Nouri H. Czarnota C., Meraghni F., Experimental Parameters Identification of Fatigue Damage Model for Short Glass Fiber Reinforced Thermoplastics GFRP. Design and Modeling of Mechanical Systems: Springer Berlin Heidelberg, 523-530, 2013 - http://dx.doi.org/10.1007/978-3-642-37143-1_63 ACL
  • Koné F., Czarnota C., Haddag B., Nouari M., Modeling of velocity-dependent chip flow angle and experimental analysis when machining 304L austenitic stainless steel with groove coated-carbide tools, Journal of Materials Processing Technology 213, 1166-1178, 2013 - http://dx.doi.org/10.1016/j.jmatprotec.2013.01.015 ACL
  • F. Hecht, P. Ventura, P. Dufilié, Original Coupled FEM/BIE numerical model for analyzing infinite periodic surface acoustic wave transducers, Journal of Computational Physics, 246 (2013), 265-274 ACL
  • Mohamed Hamdaoui, Guénhaël Lequilliec, Piotr Breitkopf, Pierre Villon, POD surrogates for real-time multi-parametric sheetmetal forming problems. International Journal of Material Forming (2013), DOI: 10.1007/s12289-013-1132-0. ACL
  • Dung Bui, Mohamed Hamdaoui and Florian De Vuyst, POD-ISAT: an efficient POD-based surrogate approach with adaptive tabulation and fidelity regions for parametrized steady-state PDE discrete solutions. International Journal for Numerical Method in Engineering (2013), DOI:10.1002/nme.4468  ACL
  • G. CHATZIGEORGIOU, A. JAVILI, P. STEINMANN, Surface electrostatics: theory and computations, Proc. R. Soc. A, 470 (2014) 20130628. ACL
  • D. TSALIS, T. BAXEVANIS, G. CHATZIGEORGIOU, N. CHARALAMBAKIS, Homogenization of elastoplastic composites with generalized periodicity in the microstructure. Int. J. Plasticity, 51 (2013) 161-187.
    ACL
  • D. TSALIS, G. CHATZIGEORGIOU, N. CHARALAMBAKIS, Admissible deformation fields for the homogenization of elastoplastic materials with generalized periodicity, Mech. Res. Commun., 53 (2013) 43-46. ACL
  • A. JAVILI, G. CHATZIGEORGIOU, P. STEINMANN, Computational homogenization in magneto-mechanics, Int. J. Solids. Struct., 50:25-26 (2013) 4197-4216. ACL
  • G. FRANZ, F. ABED-MERAIM, M. BERVEILLER, Impact of intragranular substructure parameters on the forming limit diagrams of single-phase B.C.C. steels, Materials, 6(11) (2013) 5217-5233. ACL
  • G. FRANZ, F. ABED-MERAIM, M. BERVEILLER, Strain localization analysis for single crystals and polycrystals: Towards microstructure–ductility linkage, International Journal of Plasticity, 48 (2013) 1-33. ACL
  • J.M. PIPARD, T. BALAN, F. ABED-MERAIM, X. LEMOINE, Elasto-visco-plastic modeling of mild steels for sheet forming applications over a large range of strain rates, International Journal of Solids and Structures, 50(16-17) (2013) 2691-2700. ACL
  • T. CARVALHO-RESENDE, S. BOUVIER, F. ABED-MERAIM, T. BALAN, S.-S. SABLIN, Dislocation-based model for the prediction of the behavior of b.c.c. materials - Grain size and strain path effects, International Journal of Plasticity, 47 (2013) 29-48. ACL
  • F. ABED-MERAIM, V.D. TRINH, A. COMBESCURE, New quadratic solid-shell elements and their evaluation on linear benchmark problems, Computing, 95(5) (2013) 373-394. ACL
  • T. CARVALHO-RESENDE, T. BALAN, S. BOUVIER, F. ABED-MERAIM, S.-S. SABLIN, Numerical investigation and experimental validation of a plasticity model for sheet steel forming, Modelling and Simulation in Materials Science and Engineering, 21(1) (2013) 28 pp. ACL
  • Nouri H, Czarnota C, Meraghni F. Experimental parameters identification of fatigue damage model for short glass fiber reinforced thermoplastics GFRP. Design and Modeling of Mechanical Systems: Springer Berlin Heidelberg; 2013. p. 523-30. ACL
  • B. L. Wu, G. Wan, X. H. Du, Y. D. Zhang, F. Wagner, C. Esling, The quasi-static mechanical properties of extruded binary Mg-Er alloys, Mater. Sci. Eng. A, 573 (2013) 205-214. ACL
  • B. L. Wu, G. Wan, X. H. Du, Y. D. Wang, Y. D. Zhang, F. Wagner, C. Esling, Stress-strain response of textured AZ31B magnesium alloy under uniaxial tension at the different strain rates, Mater. Sci. Eng. A, 559 (2013), 307-313. ACL
  • C. J. Geng, B. L. Wu, X. H. Du, Y. D. Wang, Y. D. Zhang, F. Wagner, C. Esling. Low cycle fatigue behavior of the textured AZ31B magnesium alloy under the asymmetrical loading, Mater. Sci. Eng. A, 560 (2013), 618-626. ACL
  • W. CHEN, C. LA BORDERIE, O. MAUREL, G. PIJAUDIER-CABOT, F. REY-BETHBEDER, Simulation of damage–permeability coupling for mortar under dynamic loads, Int. J. Numer. Anal. Meth. Geomech,(2013) ACL
  • X. Li, Q. Y. Li, Z. M. Ren, Y. Fautrelle, X. G. Lu, A. Gagnoud, Y. D. Zhang, C. Esling, H. Wang, Y. M. Dai, Q. L. Wang, Investigation on the formation mechanism of irregular dendrite during directional solidification of Al-Cu alloys under a high magnetic field, Journal of Alloys and compounds, 581 (2013), 769-775.
    ACL
  • B. Yang, Z.B. Li, Y.D. Zhang, G.W. Qin, C. Esling, O. Perroud, X. Zhao, L. Zuo, Microstructural features and orientation correlations of non-modulated martensite in Ni-Mn-Ga expitaxial thin films, Acta Mater., 61 (2013) 6809-6820.
    ACL
  • C. J. Geng, B. L. Wu, X. H. Du, Y. D. Wang, Y. D. Zhang, C. Esling, F. Wagner, Low cycle fatigue behavior of the textured AZ31B magnesium, Transactions of Nonferrous Metals Society of China., 23 (2013) 1589-1594. ACL
  • Y. D. Liu, Y. D. Zhang, Y. Ren, T. Albert, L. Zuo, In-Situ Annealing Study of Transformation of alpha and gamma Texture of Interstitial-Free Steel Sheet by High-Energy X-Ray Diffraction, Journal of Iron and Steel Research International, 20 (2013) 38-41.
    ACL
  • Mathieu Fregnaux, Stéphane Dalmasso, Pierrick Durand, Yudong Zhang, Jean-Jacques Gaumet, Jean-Pierre Laurenti, Stability versus aging of fast grown small CdS quantum dots, Materials chemistry and Physics, 142 (2013) 52-60. ACL
  • Lei Li, Yudong Zhang, Claude Esling, Ke Qin, Zhihao Zhao, Yubo Zuo, Jianzhong Cui, A microstructural and crystallographic investigation of the precipitation behaviour of a primary Al3Zr phase under a high magnetic field, J. Appl. Cryst., 46 (2013) 421-429. ACL
  • Song B., Dong S.J., Dong S.J., Fenineche N.E., Aubry E., Grosdidier T., Liao H.L., Coddet C., Microstructure and magnetic properties of atmospheric plasma sprayed Fe-40Al coating obtained from nanostructured powders, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 113, p. 787-792, 2013 ACL
  • Song B., Dong S.J., Coddet P., Hansz B., Grosdidier T., Liao H.L., Coddet C., Oxidation Control of Atmospheric Plasma Sprayed FeAl Intermetallic Coatings Using Dry-Ice Blasting, JOURNAL OF THERMAL SPRAY TECHNOLOGY, 22, p. 345-351, 2013 ACL
  • Hammad, J-M. Fleureau, M. Hattab, Kaolin/montmorillonite mixtures behaviour on oedometric path and microstructural variations. European Journal of Environmental and Civil Engineering. 17(2013) N°9, 826-840. ACL
  • Y. TAMPANGO, M. POTIER-FERRY, Y. KOUTSAWA, S. TIEM,  Coupling of polynomial approximations with application to a boundary meshless method, International Journal for Numerical Methods in Engineering, 95, pp 1094–1112, 2013 ACL
  • N. DAMIL, M. POTIER-FERRY, H. HU, New nonlinear multiscale models for wrinkled membranes, Comptes Rendus Mecanique, 341, pp 616–624 2013 ACL
  • A.LEJEUNE, H. BOUDAOUD, M. POTIER-FERRY, I. CHARPENTIER, H. ZAHROUNI, Automatic solver for non-linear partial differential equations with implicit local laws: Application to unilateral contact, International Journal for Numerical Methods in Engineering, 94, pp 850-867, 2013 ACL
  • N.J.MATHIEU, R.DIMITRIOU, A. PARRICO,M. POTIER-FERRY, H.ZAHROUNI, Flatness Defects after Bridle Rolls: a Numerical Analysis of Leveling, International Journal of Material Forming, 6, pp 255-266, 2013 ACL
  • F. MOHRI, N. DAMIL, M. POTIER-FERRY, Buckling and lateral buckling interaction in thin-walled beam-column elements  with monosymmetric cross sections, Applied Mathematical Modelling, 37, pp 3526–3540, 2013  ACL
  • Muhammad Sadiq, Jean-Sebastien Lecomte, Mohammed Cherkaoui, Nanoindentation For Measuring Individual Phase Mechanical Properties of Sn-Ag-Cu Lead-Free Solders Incorporating Pileup Effects, Chaotic Modeling and Simulation (CMSIM) 2 (2013) 335-348, ACL
  • G. GU, R. PESCI, L. LANGLOIS, E. BECKER, R. BIGOT, Application of X-ray microtomography to quantify the liquid fraction of M2 steel for semi-solid forming process, Key Eng. Mat., 554-557 (2013) 547-552 ACL
  • G. GU, R. PESCI, L. LANGLOIS, E. BECKER, R. BIGOT, Determination of quantity and localization of liquid in the semi-solid state using both 3D X-ray microtomography and 2D techniques for steel thixoforming, Sol. Sta. Phen., 192-193 (2013) 191-196 ACL
  • S. R. Dey, L. Hollang, B. Beausir, E. Hieckmannd, W. Skrotzki, Shear banding in sub-microcrystalline nickel at 4 K, Mechanics of Materials, 66 (2013) 1-6 ACL
  • S. R. Dey, L. Hollang, B. Beausir, E. Hieckmannd, W. Skrotzki, Formation of micro shear bands during cyclic deformation of sub-microcrystalline nickel, Scripta Materialia, 68 (2013) 631-634 ACL
  • Numerical investigation and experimental validation of physically based advanced GTN model for DP steels,By: Fansi, Joseph; Balan, Tudor; Lemoine, Xavier; Maire, Eric; Landron, Caroline; Bouaziz, Olivier; Ben Bettaieb, Mohamed; Habraken, Anne Marie,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 569  Pages: 1-12 Published: MAY 1 2013 ACL
  • Ionization of thymine by electron impact: investigation of inner shell orbitals, By: Dal Cappello, C.; Rezkallah, Z.; Houamer, S.; Charpentier, I.; .Roy, A. C.; Hervieux, P. A.; Ruiz-Lopez, M. F.,EUROPEAN PHYSICAL JOURNAL D  Volume: 67  Issue: 6  Article Number: 117  Published: JUN 2013 ACL
  • Particle shape analysis of volcanic clast samples with the Matlab tool MORPHEO,By: Charpentier, Isabelle; Sarocchi, Damiano; Rodriguez Sedano, Luis Angel,COMPUTERS & GEOSCIENCES  Volume: 51  Pages: 172-181  Published: FEB 2013 ACL
  • Elastic-plastic ductile damage model based on strain-rate plastic potential, By: Balan, Tudor; Cazacu, Oana,MECHANICS RESEARCH COMMUNICATIONS  Volume: 54  Pages: 21-26  Published: DEC 2013 ACL
  • Application of Laguerre based adaptive predictive control to Shape Memory Alloy (SMA) Actuator, By: Kannan, S.; Giraud-Audine, C.; Patoor, E.,ISA TRANSACTIONS  Volume: 52  Issue: 4  Pages: 469-479  Published: JUL 2013 ACL
  • Precipitation sequence during ageing in beta(1) phase of Cu-Al-Ni shape memory alloy, By: Bouabdallah, Mabrouk; Baguenane-Benalia, Ghalia; Saadi, Amar; Cheniti, Hicham; Gachon, Jean-Claude; Patoor, Etienne,JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY  Volume: 112  Issue: 1  Pages: 279-283  Published: APR 2013 ACL
  • Experimental investigation of void coalescence in a dual phase steel using X-ray tomography, By: Landron, C.; Bouaziz, O.; Maire, E.; Adrien, J.,ACTA MATERIALIA  Volume: 61  Issue: 18  Pages: 6821-6829  Published: OCT 2013 ACL
  • Driving Force and Logic of Development of Advanced High Strength Steels for Automotive Applications, By: Bouaziz, Olivier; Zurob, Hatem; Huang, Mingxin,STEEL RESEARCH INTERNATIONAL  Volume: 84  Issue: 10  Pages: 937-947  Published: OCT 2013 ACL
  • Benefits of Recovery and Partial Recrystallization of Nano-Twinned Austenitic Steels, By: Bouaziz, Olivier; Barbier, David,ADVANCED ENGINEERING MATERIALS  Volume: 15  Issue: 10  Pages: 976-979  Published: OCT 2013 ACL
  • The effect of prior ferrite formation on bainite and martensite transformation kinetics in advanced high-strength steels, By: Zhu, Kangying; Chen, Hao; Masse, Jean-Philippe; Bouaziz, Olivier; Gachet, Gabriel,ACTA MATERIALIA  Volume: 61  Issue: 16  Pages: 6025-6036  Published: SEP 2013 ACL
  • Mechanical behavior of a compositionally graded 300M steel, By: Roumina, R.; Embury, J. D.; Bouaziz, O.; Zurob, H. S.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 578  Pages: 140-149  Published: AUG 20 2013 ACL
  • Damage evolution in TWIP and standard austenitic steel by means of 3D X ray tomography, By: Fabregue, D.; Landron, C.; Bouaziz, O.; Maire, E.,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING  Volume: 579  Pages: 92-98  Published: SEP 1 2013 ACL
  • D. Sornin, T. Grosdidier, J. Malaplate, I. Tiba, P. Bonnaillie, N. Allain-Bonasso, D. Nunes , Microstructural study of an ODS stainless steel obtained by Hot Uni-axial Pressing, JOURNAL OF NUCLEAR MATERIALS, 439, p. 19-24, 2013 ACL
  • T. RICHETON, C. SCHUMAN, J.S. LECOMTE, L. BAO, C. FRESSENGEAS, Relations between twin and slip in parent lattice due to kinematic compatibility at interfaces, International Journal of Solids and Structures, 49 (2012) 1355-1364. ACL
  • Micromechanical modeling of the interactions between the microstructure and the dissipative deformation mechanisms in steels under cyclic loadingBy: Mareau, Charles; Favier, Veronique; Weber, Bastien; Galtier, Andre; Berveiller, Marcel,INTERNATIONAL JOURNAL OF PLASTICITY  Volume: 32-33  Pages: 106-120  Published: MAY-JUN 2012 ACL
  • C.F. GU, L.S. TOTH, Polycrystal modeling of tensile twinning in a Mg alloy during cyclic loading, Scripta Materialia, 67 (2012) 673-676. ACL
  • G. LE COZ, M. MARINESCU, D. DUDZINSKI, L. VELNOM, Measuring temperature of rotating cutting tool; application to MQL drilling and dry milling of aerospace alloys, Applied Thermal Engineering, 36 (2012), 434-441. ACL
  • R. Lapovok, D. Orlov, I. Timokhina, A. Pougis, L.S. Toth, P. Hodgson, Asymmetric Rolling of IF Steel Using One Idle Roll, A. Haldar, D. Bhattacharjee, Met. Trans. A43 (2012), 1328-1340. ACL
  • Laszlo S. Toth, Benoit Beausir, Dmitry Orlov, Rimma Lapovok, Arunansu Haldar, Analysis of texture and R value variations in asymmetric rolling of IF steel, Journal of Materials Processing and Technology, 212 (2012) 509-515, doi:10.1016/j.jmatprotec.2011.10.018. ACL
  • C.F. Gu, L.S. Toth, B. Beausir, Modeling of large strain hardening during grain refinement, Scripta Materialia, 66 (2012) 250-253. ACL
  • L. Faure, B. Bolle, S. Philippon, C. Schuman, P. Chevier, A. Tidu, Friction Experiments for titanium alloy tribopair sliding in dry conditions: Sub-surface and surface analysis, Tribology International, 54 (2012) 17-25 ACL
  • P. Forquin, M. Nasraoui. Experimental approach and modeling of the quasi-static and dynamic confined behaviour of PMMA, Revue des composites et des matériaux avancés, 22(1): 115-130, 2012. ACL
  • D. BARBIER, V. FAVIER, B. BOLLE, Modeling the deformation textures and microstructural evolutions of a Fe-Mn-C TWIP steel during tensile and shear testing,Materials Science & Engineering A 540 (2012) 212-225 ACL
  • C.F. GU, L.S. TOTH, Texture development and grain refinement in non-equal channel angular pressed Al, Scripta Materialia, 67 (2012) 33–36, http://dx.doi.org/10.1016/j.scriptamat.2012.03.014 ACL
  • A. Roth, T.A. Lebedkina, M.A. Lebyodkin, On the critical strain for the onset of plastic instability in an austenitic FeMnC steel, Mater. Sci. Eng. 539 (2012) 280-284. ACL
  • S. Wang, C. Schuman, L. Bao, J.S. Lecomte, Y. Zhang, J.M. Raulot, M.J. Philippe, X. Zhao, C. Esling, Variant Selection criterion for twin variants in titanium alloys deformed by rolling, Acta Mater., 60 (2012) 3912-3919. ACL
  • A. Pougis, L.S. Toth, O. Bouaziz, J-J. Fundenberger, D. Barbier, R. Arruffat, Stress and Strain Gradients in High Pressure Tube Twisting Scripta Materialia, 66 (2012) 773-776, doi.10.1016/j.scriptamat.2012.02.004. ACL
  • A. ARLAZAROV, M.GOUNÉ, O. BOUAZIZ, A. HAZOTTE, G. PETITGAND, P. BARGES, Evolution of microstructure and mechanical properties of medium Mn steels during double annealing, Mater. Sci. Engin., A 542 (2012) 31-39 ACL
  • C. Schuman, L. Bao, J.S. Lecomte, Y. Zhang, J.M. Raulot, M.J. Philippe, C. Esling, A new variant selection criterion for twin variants in titanium (part2), Adv. Eng. Mater., 14 (2012) 5. ACL
  • G. List, G. Sutter, A. Bouthiche, Cutting temperature prediction in high speed machining by numericalmodelling of chip formation and its dependence with crater wear, International Journal of Machine Tools & Manufacture, 54–55 (2012) 1–9 ACL
  • D.P. Field, C.C. Merriman, N. Allain-Bonasso, F. Wagner Quantification of dislocation structure heterogeneity in deformed polycrystals by EBBSD, Modelling and Simulation in Materials Science and Engineering, 20-2, 2012 ACL
  • B.L. Wu, Y.D. Zhang, G. Wan, M. Humbert, F. Wagner, C. Esling, Primary twinning selection with respect to orientation of deformed grains in ultra-rapidly compressed AZ31 alloy, Mat. Sci. and Eng. A, 541 (2012) 120-127. ACL
  • M. Nasraoui, P. Forquin., L. Siad, A. Rusinek. Influence of strain rate, temperature and adiabatic heating on the mechanical behaviour of poly-methylmethacrylate: Experimental and modelling analyses, Materials & Design, 37, 500–509, 2012. ACL
  • L. Sallier, P. Forquin. On the use of Hillerborg regularization method to model the softening behaviour of concrete subjected to dynamic tensile loading, European Phys. J., 206(1): 97-105, 2012. ACL
  • F. Pierron, P. Forquin. Ultra high speed full-field deformation measurements on concrete spalling specimens and stiffness identification with the Virtual Fields Method, STRAIN  Volume: 48  Issue: 5  Pages: 388-405  Published: OCT 2012
    ACL
  • C. PATAPY, N. GEY, A. HAZOTTE, M. HUMBERT, D. CHATEIGNER, R. GUINEBRETIERE, M. HUGER, T. CHOTARD, Mechanical behavior characterization of high zirconia fused-cast refractories at high temperature: Influence of the cooling stage on microstructural changes, Journal of the European Ceramic Society, 32 (2012) 3929–3939 ACL
  • G. Sutter, A. Molinari, G. List, X. Bi, Chip Flow and Scaling Laws in High Speed Metal Cutting. Journal of Manufacturing Science and Engineering 134, (2012). ACL
  • ZS. KOVACS, L.S. TOTH, J. LENDVAI, Ideal elasto-plastic behavior in torsional deformation of Zr44Ti11Cu10Ni10Be25 bulk metallic glass, Journal of Alloys and Compounds, 542 (2012) 85–89. ACL
  • Mohri F, Damil N. and Potier Ferry M. Pre-buckling deflection effects on stability of thin-walled beams with open sections. Steel and Composite Structures. 13(1) 2012 71-89 ACL
  • C. Fressengeas, V. Taupin, M. Upadhyay and L. Capolungo, Tangential continuity of elastic/plastic curvature and strain at interfaces, Int. J. Solids and Structures, 49, 2660-2667 (2012). ACL
  • H. Laribou, C. Fressengeas, D. Entemeyer, V. Jeanclaude, R. Pesci and A. Tazibt, Effects of the impact of a low temperature nitrogen jet on metallic surfaces, Proc. Royal Society London A, 468>, 2147, 3601-3619 (2012). ACL
  • Sid Ahmed Meftah, El Mostafa Daya, Abdelouahed Tounsi, Finite element modelling of sandwich box column with viscoelastic control under seismic loading, Thin-Walled Structures, Volume 51, Pages 174-185, 2012
    ACL
  • M. CHARPENTIER, D. DALOZ, A. HAZOTTE, Interaction between phase transformation and compression sintering in a TiAl-based intermetallic alloy, Kovove Mater. 50 (2012) 301–307 ACL
  • I.V. Shashkov, M.A. Lebyodkin, T.A. Lebedkina, P. Dobron, F. Chmelik, R. Kral, K. Parfenenko, K. Mathis, Acoustic-emission study of the intermittency of plastic flow associated with twinning and dislocation glide in Mg and Al based alloys, Acta Physica Polonica A 122 (2012) 430-434. ACL
  • J. J. Arnoux, G. Sutter, G. List, Characterization of Dynamic Friction Factor for FEM Modeling of High Speed Process, Engineering Transactions, 60 (2012), 205-213. ACL
  • A. Lejeune, F. Béchet, H. Boudaoud, N. Mathieu, M. Potier-Ferry, Object-Oriented design to automate a high order non-linear solver based on Asymptotic-Numerical Methods, Advances in Engineering Software, 48, pp 70-88, 2012 ACL
  • F. Mohri, N. Damil, M. Potier-Ferry, Pre-buckling deflection effects on stability of thin walled beams with open sections, Steel and Composite structures, 13, pp 71-89, 2012 ACL
  • K. Mhada, B. Braikat, H. Hu, N. Damil, M. Potier-Ferry, About macroscopic models of instability pattern, formation, International Journal of Solids and Structures, 49, pp 2978-2989, 2012 ACL
  • Y Liu, K .Yu, H. Hu, S. Belouettar , M. Potier-Ferry, Y. Koutsawa, A new Fourier−related double scale analysis for instability phenomena in sandwich structures, International Journal of Solids and Structures, 49, pp 3077-3088, 2012 ACL
  • S. Nezamabadi, H. Zahrouni, J. Yvonnet, M. Potier-Ferry, Multiscale analysis of instabilities in heterogeneous materials using ANM and multilevel FEM, European Journal of Computational Mechanics, 21, pp 280-289, 2012 ACL
  • M. MCPHIE, S. BERBENNI, M. CHERKAOUI, Activation energy for nucleation of partial dislocations from grain boundaries, Computational Materials Science, 62 (2012), 169-174. ACL
  • N. ALLAIN-BONASSO, F. WAGNER, S. BERBENNI, D.P. FIELD. A study of the heterogeneity of plastic deformation in IF steel by EBSD. Materials Science and Engineering A, 548 (2012) 56-63.
    ACL
  • S. MERCIER, A. MOLINARI, S. BERBENNI, M. BERVEILLER. Comparison of different homogenization approaches for elastic-viscoplastic materials. Modelling and Simulation in Materials Science and Engineering, 20 (2012), 024004.
    ACL
  • V. TAUPIN, S. BERBENNI, C. FRESSENGEAS. Size effects on the hardening of channel type microstructures: a Field Dislocation Mechanics-based approach. Acta Materialia, 60 (2012) 664–673.
    ACL
  • P.-A. JUAN, S. BERBENNI, L. CAPOLUNGO. Prediction of internal stresses during growth of first and second generation twins in Mg and Mg alloys. Acta Materialia, 60 (2012) 476-486.
    ACL
  • N.M. CORDERO, S. FOREST, E.P. BUSSO, S. BERBENNI, M. CHERKAOUI. Grain size effects on plastic strain and dislocation density tensor fields in metal polycrystals. Computational Materials Science, 52 (2012), 7-13. ACL
  • H.-J. CHANG, A. GAUBERT, M. FIVEL, S. BERBENNI, O. BOUAZIZ, S. FOREST. Analysis of particle induced dislocation structures using three-dimensional dislocation dynamics and strain gradient plasticity. Computational Materials Science, 52 (2012), 33-39. ACL
  • SARKAR, S. SUWAS, D. GORAN, J.J. FUNDENBERGER, L.S. TOTH, T. GROSDIDIER, Equal channel angular pressing processing routes and associated structure modification: a differential scanning calorimetry and X-ray line profile analysis, Powder Diffraction, 27 (2012) 194-199. ACL
  • M BENGHERSALLAH, L BOULANOUAR, G. LE COZ, A. DEVILLEZ, D DUDZINSKI, Dry high speed milling of cobalt-base hard facing superalloy, Mechanics 18 (5) (2012), 591-599 ACL
  • A. Pougis, L.S. Toth, O. Bouaziz, J-J. Fundenberger, D. Barbier, R. Arruffat, Stress and Strain Gradients in High Pressure Tube Twisting, Scripta Materialia, 66 (2012) 773-776 ACL
  • S. BAHI, M. Nouari, A. Moufki, M. El Mansori, A. Molinari, Hybrid modelling of sliding–sticking zones at the tool–chip interface under dry machining and tool wear analysis, 286-287 (2012) WEAR 45–54. ACL
  • G. ROBIN, F. VANDER MEULEN, N. WILKIE-CHANCELLIER, L. MARTINEZ, L. HAUMESSER, J. FORTINEAU, P. GRIESMAR, M. LETHIECQ, G. FEUILLARD, Ultrasonic self-calibrated method applied to monitoring of sol-gel transition, Ultrasonics, 52 (2012) 622-627. ACL
  • B. Piotrowski, T. Ben Zineb, E. Patoor, A. Eberhardt, Modeling of niobium precipitates effect on the Ni47Ti44Nb9 Shape Memory Alloy behavior, International Journal of Plasticity, 36 (2012) 130-147. ACL
  • B. Piotrowski, T. Ben Zineb, E. Patoor, A. Eberhardt, A Finite Element-Based Numerical tool for the Ni47Ti44Nb9 SMA Structures Design: Application to Tightening Rings, Journal of Intelligent Material Systems and Structures, (2012) 23, 141-153 ACL
  • L. Weiss, A. Tazibt, A. Tidu and M. Aillerie, Water density and polarizability deduced from the refractive index determined by interferometric measurements up to 250 MPa, Journal of Chemical Physics (2012) 136 124201 ACL
  • A. Chattopadhay, L. Bao, J.S. Lecomte, Y. Zhang, C. Schuman, M.J. Philippe, C. Esling, Role of glide systems in channel die compression of commercially pure titanium alloy, MATERIALS SCIENCE AND TECHNOLOGY, 28, N° 3, (2012) 372-376. ACL
  • JACQUES N., MERCIER S., MOLINARI A., Effects of microscale inertia on dynamic ductile crack growth, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2012, vol. 60, pp. 665-690 ACL
  • WOLFF C., MERCIER S., COUQUE H., MOLINARI A., Modeling of conventional hot compaction and Spark Plasma Sintering based on modified micromechanical models of porous materials, MECHANICS OF MATERIALS, 2012, vol. 49, pp. 72-91 ACL
  • JACQUES N., MERCIER S., MOLINARI A., Void coalescence in a porous solid under dynamic loading conditions, INTERNATIONAL JOURNAL OF FRACTURE, 2012, vol. 173, pp. 53-66 ACL
  • JACQUES N., MERCIER S., MOLINARI A., Multiscale modelling of voided ductile solids with micro-inertia and application to dynamic crack propagation, Procedia IUTAM, 2012, vol. 3, pp. 203-213 ACL
  • L. GERMAIN, N. GEY, R. MERCIER, P. BLAINEAU, M. HUMBERT, An advanced approach to reconstructing parent orientation maps in the case of approximate orientation relations: Application to steels, Acta Materialia 60 (2012) 4551-4562 ACL
  • N. GEY, P. BOCHER, E. UTA, L. GERMAIN, M. HUMBERT, Texture and microtexture variations in a near-alpha titanium forged disk of bimodal microstructure, Acta Materialia 60 (2012) 2647-265. ACL
  • L. Weiss, A. Tazibt, A.Tidu and M. Aillerie, Erratum:"Water density and polarizability deduced from the refractive index determined by interferometric measurements up to 250 MPa", Journal of Chemical Physics, Vol 136, 124201 (2012)
    ACL
  • Halila F., Czarnota C., Nouari M., Analytical stochastic modeling and experimental investigation on abrasive wear when turning difficult to cut materials, Wear 302, 1145-1157, 2013 - http://dx.doi.org/10.1016/j.wear.2012.12.055 ACL
  • Balaji Raghavan, Mohamed Hamdaoui, Manyu Xiao, Piotr Breitkopf, Pierre Villon, A bi-level meta-modelling approach for structural optimization using modified POD bases and diffuse approximation, doi:10.1016/j.compstruc.2012.06.008, Computers & Structures (2012). ACL
  • H. CHALAL, A. SALAHOUELHADJ, F. ABED-MERAIM, Evaluation of a new solid-shell finite element on the simulation of sheet metal forming processes, Steel Research International, (2012) 315-318. ACL
  • L.Z. MANSOURI, H. CHALAL, ABED-MERAIM, T. BALAN, Plastic instability based on bifurcation analysis: Effect of hardening and Gurson damage parameters on strain localization, Key Engineering Materials, 504-506 (2012) 35-40. ACL
  • F. ABED-MERAIM, V.D. TRINH, A. COMBESCURE, Assumed-strain solid–shell formulation for the six-node finite element SHB6: Evaluation on nonlinear benchmark problems, European Journal of Computational Mechanics, 21(1-2) (2012) 52-71. ACL
  • A. SALAHOUELHADJ, F. ABED-MERAIM, H. CHALAL, T. BALAN, Application of the continuum shell finite element SHB8PS to sheet forming simulation using an extended large strain anisotropic elastic-plastic formulation, Archive of Applied Mechanics, 82(9) (2012) 1269-1290. ACL
  • W. CHEN, O. MAUREL, T. REESS, A. SILVESTRE DE FERRON, C. LA BORDERIE, G. PIJAUDIER-CABOT, F. REY-BETHBEDER, A. JACQUES, Experimental study on an alternative oil stimulation technique for tight gas reservoirs based on dynamic shock waves generated by Pulsed Arc Electrohydraulic Discharges, Journal of Petroleum Science and Engineering, 88–89 (2012) 67–74. ACL
  • Z. B. Li, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo, Evidence for a monoclinic incommensurate superstructure in modulated martensite, Acta Mater., 60 (2012) 6982-6990. ACL
  • Z. B. Li, J. L. Sánchez Llamazares, C. F. Sánchez-Valdés, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo, Microstructure and magnetocaloric effect of melt-spun Ni52Mn26Ga22 ribbon, Appl. Phys. Lett.,100 (2012) 174102.
    ACL
  • Xi Li, Annie Gagnoud, Yves Fautrelle, Zhongming Ren, Rene Moreau, Yudong Zhang, Claude Esling, Dendrite fragmentation and columnar-to-equiaxed transition during directional solidification at lower growth speed under a strong magnetic field, Acta Mater., 60 (2012) 3321-3332. ACL
  • X.X. Zhang, S.Y. Wang, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo, Carbon-content dependent effect of magnetic field on austenitic decomposition of steels, J. Magn. Magn. Mater., 324 (2012) 1385-1390.
    ACL
  • X. Liu, T. Hammad, N. Saiyouri, M. Hattab, 2012. Physical chemical analysis of marine sediment cementation from the Gulf of Guinea. C. R. Geoscience. 344 (2012), N°9, 461-470. ACL
  • H. CHALAL, S.-G. Racz, T. BalanSpringback of thick sheet AHSS subject to bending under tension, International Journal of Mechanical Sciences, 59 (2012) 104-114. ACL
  • D. Lagoudas, D. Hartl, Y. Chemisky, L. Machado, P. Popov, Constitutive model for the numerical analysis of phase transformation in polycrystalline shape memory alloys, International Journal of Plasticity, 32 (2012), 155-183 ACL
  • A. BARBAS, A.S. BONNET, P. LIPINSKI, R. PESCI, G. DUBOIS,Development and mechanical characterization of porous titanium bone substitutes, J. Mech. Beha. Bio. Mat., 9 (2012), 34-44 ACL
  • G. GU, R. PESCI, E. BECKER, L. LANGLOIS, R. BIGOT, M. SCHEEL, Quantification and localization of liquid zone of partially remelted tool steel M2 using X-ray microtomography and Scanning Electron Microscopy, Acta Mater., 60 (2012) 948-957 ACL
  • P. Chekhonin, B. Beausir, J. Scharnweber, C.-G. Oertel, T. Hausöl, H. W. Höppel, H.-G. Brokmeier, W. Skrotzki, Confined recrystallization of high purity aluminium during accumulative roll bonding of aluminium laminates, Acta Mater., 60 (2012) 4661-4671.  ACL
  • Analysis of the air-bending test using finite-element simulation: Application to steel sheets, By: Reche, D.; Besson, J.; Sturel, T.; Lemoine, X.; Gourgues-Lorenzon, A. F.INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES  Volume: 57  Issue: 1  Pages: 43-53  Published: APR 2012 ACL
  • Triple-differential cross sections for the ionization of thymine by electrons and positrons, By: Dal Cappello, C.; Charpentier, I.; Houamer, S.; Hervieux, P. A.; Ruiz-Lopez, M. F.; Mansouri, A.; Roy, A. C.,JOURNAL OF PHYSICS B-ATOMIC MOLECULAR AND OPTICAL PHYSICS  Volume: 45  Issue: 17  Article Number: 175205  Published: SEP 14 2012 ACL
  • Comment on "Experimental and theoretical study of the triple-differential cross section for electron-impact ionization of thymine molecules",By: Houamer, S.; Dal Cappello, C.; Charpentier, I.; Hervieux, P. A.; Roy, A. C.,PHYSICAL REVIEW A  Volume: 86  Issue: 2  Article Number: 026701  Published: AUG 22 2012 ACL
  • On higher-order differentiation in nonlinear mechanics,By: Charpentier, I.,OPTIMIZATION METHODS & SOFTWARE  Volume: 27  Issue: 2  Special Issue: SI  Pages: 221-232  Published: 2012 ACL
  • « An analysis of boundary condition effects on the thermomechanical modeling of FSW process », A. Guedoiri, A. Moufki, V. Favier, H. Zahrouni. AIP Conf. Proc. ( 2011), Volume 1315, pages 911-916 ACL
  • T. RICHETON, G.F. WANG, C. FRESSENGEAS, Continuity constraints at interfaces and their consequences on the work hardening of metal-matrix composites, Journal of the Mechanics and Physics of Solids, 59 (2011) 2023-2043. ACL
  • A. DEVILLEZ, G. LE COZ, S. DOMINIAK, D. DUDZINSKI, Dry machining of Inconel 718, workpiece surface integrity, Journal of Materials Processing Technology 211 (10) (2011), 1590-1598 ACL
  • Laouafa F., Prunier F., Daouadji A., Darve F. (2011) “Stability in Geomechanics, experimental and numerical analyses.“ International Journal for Numerical and Analytical Methods in Geomechanics, 35 (2): 112–139. ACL
  • W. CHEN, O. MAUREL, T.REESS, M.MATALLAH, A. DE FERRON, C. LA BORDERIE, G. PIJAUDIER-CABOT, Modelling anisotropic damage and permeability of mortar under dynamic loads, EJECE, 15 (2011) No. 5. ACL
  • L. Li, Y. Zhang, C. Esling, H. Jiang, Z. Zhao, Y. Zuo, J. Cui, Crystallographic features of primary Al3Zr phase, J. Cryst. Growth, 316 (2011) 172-176.
    ACL
  • M. Moumnassi, S. Belouettar, É. Béchet, S.P.A. Bordas, D. Quoirin, M. Potier-Ferry, Finite element analysis on implicitly defined domains: An accurate representation based on arbitrary parametric surfaces, Computer Methods in Applied Mechanics and Engineering , 200, 774-796, 2011. ACL
  • C.F. GU, L.S. TOTH, M. ARZAGHI, C.H.J. DAVIES, Effect of Strain Path on Grain Refinement in Severely Plastically Deformed Copper, Scripta Materialia, 64 (2011) 284–287. ACL
  • Z.B. Li, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo, Determination of the orientation relationship between austenite and incommensurate 7M modulated martensite in Ni–Mn–Ga alloys, Acta Mater., 59 (2011) 2762–2772. ACL
  • N. Bayona Carrillo, N. Bozzolo, J.J. Fundenberger, F. Wagner et al., Effect of Recrystallization on Tensile Behavior, Texture, and Anisotropy of Ti-3Al-2.5 V Cold Pilgered Tubes, Advanced Engineering Materials, 13-5, pp.383-387, 2011. ACL
  • A. Tri, H. Zahrouni, M. Potier-Ferry. Perturbation technique and method of fundamental solution to solve nonlinear Poisson problems. Engineering Analysis with Boundary Elements 35 (2011) 273–278 ACL
  • J Bai, J M Raulot, Y D Zhang, C Esling, X Zhao, L Zuo, Crystallographic, magnetic, and electronic structures of ferromagnetic shape memory alloys Ni2XGa (X=Mn,Fe,Co) from first-principles calculations, J. Appl. Phys., 109 014908 (2011). ACL
  • C.F. Gu, L.S. Toth, C.H.J. Davies, Effect of Strain Reversal on Texture and Grain Refinement in Route C Equal Channel Angular Pressing of Copper, , Scripta Materialia, 65 (2011) 167-170. ACL
  • C.F. Gu and L.S. Toth, The origin of strain reversal texture in equal channel angular pressing, Acta Materialia, 59 (2011) 5749-5757. ACL
  • D. DALOZ, U. HECHT, J. ZOLLINGER, H. COMBEAU, A. HAZOTTE, M. ZALOZNIK, Microsegregation, macrosegregation and related phase transformations in TiAl alloys, Intermetallics 19 (2011) 749-756 ACL
  • Yuri Estrin, Vincent Lemiale, Robert O’Donnell, Laszlo S. Toth, On homogeneous nucleation of dislocation loops in nanocrystalline materials, Metallurgical Transactions A, 42 (2011) 3883-3888. ACL
  • V.D. TRINH, F. ABED-MERAIM, A. COMBESCURE, A new assumed strain solid–shell formulation “SHB6” for the six-node prismatic finite element, Journal of Mechanical Science and Technology, 25(9) (2011) 2345-2364. ACL
  • S. Suwas, B. Beausir, L.S. Toth, J.J. Fundenberger, G. Gottstein, Texture evolution in commercially pure Titanium after warm equal channel angular extrusion, Acta Materialia, 59 (2011) 1121-1133. ACL
  • B. Erzar, P. Forquin. Free water influence on the dynamic tensile behaviour of concrete, Applied Mech. Mat., 82:45-50, 2011 ACL
  • P. Forquin. Influence of free water and strain-rate on the shear behaviour of concrete, Applied Mech. Mat., 82:148-153, 2011 ACL
  • B. Erzar, P. Forquin. Experiments and mesoscopic modelling of dynamic testing of concrete, Mechanics of Materials, 43:505–527, 2011 ACL
  • R.N. Mudrock, M. Lebyodkin, P. Kurath, A.J. Beaudoin, T. Lebedkina, Strain-Rate Fluctuations During Macroscopically-Uniform Deformation of Solution-Strengthened Alloy, Scripta Materialia 65 (2011) 1093–1096. ACL
  • H. Hu, S. Belouettar, M.Potier-Ferry, A. Makradi, Y. Koutsawa, Assessment of various kinematic models for instability analysis of sandwich beams, Engineering Structures, 33 (2011) 572-579. ACL
  • H. Hu, N. Damil, M. Potier-Ferry, A bridging technique to analyse the influence of boundary conditions on instability patterns, Journal of Computational Physics, 230 ( 2011) 3753-3764. ACL
  • Q. Z. He, H. Hu, S. Belouettar, G. Giunta, K. Yu, Y. Liu, F. Biscani, E. Carrera, M. Potier-Ferry, Multi-scale Modelling of Sandwich Structures Using Hierarchical Kinematics, Composite Structures, 93 (2011) 2375-2383. ACL
  • W. Elmay, E. Patoor, B. Bolle, T. Gloriant, F. Prima, A. Eberhardt, P. Laheurte, Optimization of mechanical properties of Ti-Nb binary alloys for biomedical application, Computer Methods in Biomechanics and Biomedical Engineering, 14 (2011) 119. ACL
  • L. Bao, C. Schuman, J.S. Lecomte, M.J. Philippe, X. Zhao, C. Esling, A study of twin variant selection and twin growth in titanium, ADVANCED ENGINEERING MATERIALS, Vol 13, Issue 10 (2011) 928-932 ACL
  • Y. Zhang, S. Wang, C. Esling, J.S. Lecomte, C. Schuman, X. Zhao, L. Zuo, A method to identify dislocations in a known crystal structure by transmission electron microscopy, J. Appl. Cryst., 44 (2011) 1164-1168. ACL
  • C. Schuman, L. Bao, J.S. Lecomte, Y. Zhang, J.M. Raulot, M.J. Philippe, C. Esling, A new variant selection criterion for twin variants in titanium (part1), Adv. Eng. Mater., 13 (2011) 1114-1121. ACL
  • F. Pierron, R. Cheriguene, P. FORQUIN, R. Moulart, M. Rossi, M. Sutton. Performances and limitations of three ultra high-speed imaging cameras for full-field deformation measurements, Applied Mech. Mat., 70: 81-86, 2011 ACL
  • Durrenberger L.; Lemoine X.; Molinari A., Effects of pre-strain and bake-hardening on the crash properties of a top-hat section, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 211 (2011) 1937-1947. ACL
  • S. Bahi, Nouari M., Moufki A., El Mansori M., Molinari A., A new friction law for sticking and sliding contacts in machining, TRIBOLOGY INTERNATIONAL, 44 (2011) 764-771. ACL
  • Molinari A.; Cheriguene R.; Miguelez H., Numerical and analytical modeling of orthogonal cutting: The link between local variables and global contact characteristics, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 53 (2011) 183-206. ACL
  • Vural M.; Molinari A.; Bhattacharyya N., Analysis of Slot Orientation in Shear-Compression Specimen (SCS), EXPERIMENTAL MECHANICS, 51 (2011) 263-273. ACL
  • G. LIST, G. SUTTER, X.F. BI, A. BOUTHICHE, J. J. ARNOUX, " Temperature rise and heat transfer in high speed machining: FEM modeling and experimentation ", Advanced Materials Research, Vols. 189-193, (2011) p. 1502-1506. ACL
  • M. Upadhyay, L. Capolungo, V. Taupin and C. Fressengeas, Grain boundary and triple junction energies in crystalline media: a disclination based approach, Int. J. Solids and Structures, 48, 3176–3193, 2011. ACL
  • C. Fressengeas, V. Taupin and L. Capolungo, An elasto-plastic theory of dislocation and disclination fields,  Int. J. Solids and Structures, 48, 3499–3509, 2011. ACL
  • Daouadji A., Darve F., Al Gali H., Hicher P.Y., Laouafa F., Lignon S., Nicot F., Nova R., Pinheiro M., Prunier F., Sibille L., Wan R. (2011) “Diffuse Failure in Geomaterials: Experiments, Theory and Modelling, International Journal for Numerical and Analytical Methods in Geomechanics, 35(16): 1731-1773. ACL
  • Meraghni F., Nouri H., Bourgeois N., Czarnota C., P. Lory, Parameters identification of fatigue damage model for short glass fiber reinforced poyamide (PA6-GF30) using digital image correlation, Procedia Engineering 10, 2110-2116, 2011 - http://dx.doi.org/10.1016/j.proeng.2011.04.349 ACL
  • F. WAGNER, N. ALLAIN-BONASSO, S. BERBENNI. Automatic correlation of grains from two different EBSD maps. Materials Characterization, 62 (2011), 681-683. ACL
  • C. SCHILLEBEECKX, S. BERBENNI, L. CAPOLUNGO, M. CHERKAOUI. A new micromechanics-based scale transition model for the strain-rate sensitive behavior of Nanocrystalline materials. Philosophical Magazine, 91 (2011), 657-681. ACL
  • N. NICAISE, S. BERBENNI, F. WAGNER, M. BERVEILLER, X. LEMOINE. Coupled effects of grain size distributions and crystallographic textures on the plastic behaviour of IF steels. International Journal of Plasticity, 27 (2011), 232-249.
    ACL
  • A. MOUFKI, D DUDZINSKI, G. LE COZ, An Analytical Thermomechanical Modelling of Peripheral Milling Process Using a Predictive Machining Theory, Advanced Materials Research 223 (2011), 93-100 ACL
  • Cong DY, Zhang YD, Esling C, Wang YD, Lecomte JS, Zhao X, Zuo L, Microstructural and crystallographic characteristics of interpenetrating and non-interpenetrating multiply twinned nanostructure in a Ni-Mn-Ga ferromagnetic shape memory alloy, Acta Mater., 59 (2011) 7070-7081. ACL
  • M. HUMBERT, P. BLAINEAU, L. GERMAIN AND N. GEY, Refinement of orientation relations occurring in phase transformation based on considering only the orientations of the variants, Scripta Materialia 64 (2011) 114-117 ACL
  • N. GEY, P. BLAINEAU, L. GERMAIN, M. HUMBERT, D. BARBIER, A. PERLADE, Restitution of the shapes and orientations of the prior austenitic grains from inherited alpha' orientation maps in steels, Solid State Phenomena Vols. 172-174 (2011) 911-915 ACL
  • I. LEAHU-ALUAS, F. ABED-MERAIM, A proposed set of popular limit-point buckling benchmark problems, Structural Engineering and Mechanics, 38(6) (2011) 767-802. ACL
  • M. KILLPACK, F. ABED-MERAIM, Limit-point buckling analyses using solid, shell and solid–shell elements, Journal of Mechanical Science and Technology, 25(5) (2011) 1105-1117. ACL
  • G. FRANZ, F. ABED-MERAIM, T. BEN ZINEB, X. LEMOINE, M. BERVEILLER, Impact of intragranular microstructure development on ductility limits of multiphase steels, Materials Science and Engineering A, 528(10-11) (2011) 3777-3785. ACL
  • F. ABED-MERAIM, A. COMBESCURE, New prismatic solid–shell element: assumed strain formulation and hourglass mode analysis, Structural Engineering and Mechanics, 37(2) (2011) 253-256. ACL
  • ESSERSI O., TARFAOUI M., BOYD S., SHENOI RA., MERAGHNI F., Experimental study of dynamic behaviour of aluminum/aluminum and composite/composite double lap joints. Applied Mechanics and Materials, Vol. 62, (2011), pp. 155-163.  ACL
  • S. BERVEILLER, B. MALARD, E. PATOOR, J. WRIGHT, G. GEANDIER, In-situ synchrotron analysis of lattice rotations in individual grains during stress-induced martensitic transformations in a polycrystalline CuAlBe shape memory alloy, Acta Materialia, 59 (2011) 3636-3645 ACL
  • N. Mathieu, K. Sab, S.-A. Zaimi - An enhanced homogenization approach for masonry structures with compressible joints. Application to hearth thermomechanical computations - International Journal For Numerical and Analytical Methods in Geomechanics – Février 2011
    ACL
  • Z.B. Li, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo, Determination of the orientation relationship between austenite and 5M modulated martensite in Ni-Mn-Ga alloys, J. Appl. Cryst., 44 (2011) 1222-1226.
    ACL
  • J. Bai, J-M Raulot, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo, The effect of alloying Co element on Ni-Mn-Ga magnetic shape memory alloys from first-principles calculations, Appl. Phys. Lett., 98 (2011) 164103. ACL
  • G. Wan, B.L. Wu, Y.H. Zhao, Y.D. Zhang, C. Esling, Strain-rate sensitivity of textured Mg-3.0Al-1.0Zn alloy (AZ31) under impact deformation, Scripta Mater., 65 (2011) 461-464.
    ACL
  • D. Y. Cong, Y. D. Zhang, C. Esling, Y. D. Wang, X. Zhao, L. Zuo, Modification of preferred martensitic variant distribution by high magnetic field annealing in an Ni–Mn–Ga alloy, J. Appl. Cryst., 44 (2011) 1033–1039. ACL
  • Z. B. Li, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo, Twin relationships of 5M modulated martensite in Ni-Mn-Ga alloy, Acta Mater., 59 (2011) 3390-3397. ACL
  • S. Y. Song, X. Zhao, Y. D. Zhang, C. Esling, L. Zuo, Influence of a High Magnetic Field on the Solubility of Ferrite and the Amount of Pearlite, Steel Research International 82 (2011) 836-838. 
    ACL
  • X. Li, A. Gagnoud, Y. Fautrelle, Z. M. Ren, G. H. Cao, R. Moreau, Y. D. Zhang, C. Esling, Investigation of thermoelectric magnetic force in solid and its effect on morphological instability in directional solidification, J. Cryst. Growth, 324 (2011) 217-224.
    ACL
  • Zhang X. D., Hao S.Z., Li X.N., Dong C., Grosdidier T., Surface modification of pure titanium by pulsed electron beam, APPLIED SURFACE SCIENCE, 257, p. 5899-5902, 2011 ACL
  • M. Hattab, J-M. Fleureau. Experimental analysis of kaolinite particle orientation during triaxial path. International journal for numerical and analytical methods in geomechanics. 35(2011) N°5: 947-968. ACL
  • ZY. Yin, M. Hattab, P-Y Hicher. Multiscale modeling of a sensitive marine clay. International journal for numerical and analytical methods in geomechanics. 35(2011), N°15: 1682-1702. ACL
  • B. Sułkowski, R. Chulist, B. Beausir, W. Skrotzki, B. Mikułowski, Stage B work-hardening of magnesium single crystals, Crystal Research and Technology, 46 (2011) 439-442. ACL
  • Semi phenomenological modelling of the behavior of TRIP steelsBy: Kubler, R. F.; Berveiller, M.; Buessler, P., INTERNATIONAL JOURNAL OF PLASTICITY  Volume: 27  Issue: 3  Pages: 299-327  Published: MAR 2011 ACL
  • EXPERIMENTALLY-BASED IDENTIFICATION OF SHEET METALS PLASTIC ANISOTROPY, WITH A VIEW TO OBTAINING IMPROVED PREDICTIONS IN FORMING SIMULATIONS, Ferron, G.; Charpentier, I.; Martiny, M.; Teaca, M. Edited by: Onate, E; Owen, DRJ; Peric, D; et al. Conference: 11th International Conference on Computational Plasticity (COMPLAS) - Fundamentals and Applications Location: Barcelona, SPAIN Date: SEP 07-09, 2011, COMPUTATIONAL PLASTICITY XI: FUNDAMENTALS AND APPLICATIONS  Pages: 229-240  Published: 2011 ACL
  • A finite element analysis of the bending and the bendability of metallic sheets, By: Ben Bettaieb, Mohamed; Lemoine, Xavier; Bouaziz, Olivier; Habraken, Anne Marie; Duchene, Laurent,INTERNATIONAL JOURNAL OF MATERIAL FORMING  Volume: 4  Issue: 3  Pages: 283-297  Published: SEP 2011 ACL
  • Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements,By: Ben Bettaieb, Mohamed; Lemoine, Xavier; Bouaziz, Olivier; Habraken, Anne Marie; Duchene, Lauren,MECHANICS OF MATERIALS  Volume: 43  Issue: 3  Pages: 139-156  Published: MAR 2011 ACL
  • On the numerical integration of an advanced Gurson model, By: Ben Bettaieb, Mohamed; Lemoine, Xavier; Duchene, Laurent; Habraken, Anne Marie,INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING  Volume: 85  Issue: 8  Pages: 1049-1072  Published: FEB 25 2011 ACL
  • Ionization of molecules by electron impact: Differential and total cross sections,By: Rezkallah, Z.; Houamer, S.; Dal Cappello, C.; Charpentier, I.; Roy, A. C.,NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS  Volume: 269  Issue: 23  Pages: 2750-2757  Published: DEC 1 2011 ACL
  • Second-order Born approximation for the ionization of molecules by electron and positron impact, By: Dal Cappello, C.; Rezkallah, Z.; Houamer, S.; Charpentier, I.); Hervieux, P. A.; Ruiz-Lopez, M. F.; Dey, R.; Roy, A. C.,PHYSICAL REVIEW A  Volume: 84  Issue: 3  Article Number: 032711  Published: SEP 20 2011 ACL
  • A generic approach for the solution of nonlinear residual equations. Part III: Sensitivity computations, By: Lampoh, Komlanvi; Charpentier, Isabelle; Daya, El Mostafa,COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING  Volume: 200  Issue: 45-46  Pages: 2983-2990  Published: 2011 ACL
  • Constitutive model for shape memory alloys including phase transformation, martensitic reorientation and twins accommodation, By: Chemisky, Y.; Duval, A.; Patoor, E.; Ben Zineb, T.,MECHANICS OF MATERIALS  Volume: 43  Issue: 7  Pages: 361-376  Published: JUL 2011 ACL
  • S. ABDELKHALEK, P. MONTMITONNET, M. POTIER-FERRY, H. ZAHROUNI, N. LEGRAND AND P. BUESSLER, Strip flatness modelling including buckling phenomena during thin strip cold rolling, Ironmaking and Steelmaking, Vol 37 , Number 4, pages : 290-297, 2010 ACL
  • C. COLLARD, V. FAVIER, S. BERBENNI, M. BERVEILLER, Role of discrete intra-granular slip bands on the strain-hardening of polycrystals, International Journal of Plasticity, 26 (2010) 310-328. ACL
  • L.S. TOTH, Y. ESTRIN, R. LAPOVOK, C. GU, A model of grain fragmentation based on lattice curvature, Acta Materialia 58 (2010) 1782-1794. ACL
  • H. Ait-Amokhtar and C. Fressengeas, Crossover from continuous to discontinuous propagation in the Portevin - Le Chatelier effect, Acta Mater. 58 (2010) 1342-1349. ACL
  • X.F. BI, G. LIST, G. SUTTER, A. MOLINARI, Y.X. LIU, Crater Wear Modeling in Conventional Speed Machining, Advanced Materials Research, 97-101 (2010) 1891-1894. ACL
  • Daouadji A., Al Gali H., Darve F., Zeghloul A., (2010) “Instability in Granular Materials: An Experimental Evidence of Diffuse Mode of Failure for Loose Sands”, Journal of Engineering Mechanics (ASCE), 136, 5, 575-588. ACL
  • M. Hattab, J-M Fleureau, Experimental analysis of kaolinite particle orientation during triaxial path, Int. J. for Num. and Anal. Methods in Geomechanics, (2010) DOI: 10.1002/nag.936. ACL
  • M. Hattab, S. Bouziri-Adrouche, J-M. Fleureau, Evolution de la microtexture d'une matrice kaolinitique sur chemin triaxial axisymetrique, Canadian Geotechnical Journal, 47 (2010) 34-48. ACL
  • M. Hattab, J-M. Fleureau, Experimental study of kaolin particle orientation mechanism, Geotechnique, 60 (2010) 323-331. ACL
  • H. Hu, S. Belouettar, M. Potier-Ferry, E.M. Daya, A. Makradi, Multi-scale nonlinear modeling of sandwich structures using the Arlequin method (Part II: nonlinear modelling), Composite structures, 92 (2010) 515-522. ACL
  • Jacques N., Czarnota C., Mercier S., Molinari A., A micromechanical constitutive model for dynamic damage and fracture of ductile materials, International Journal of Fracture 162 159-175, 2010 - http://dx.doi.org/10.1007/s10704-009-9436-2
    ACL
  • S. Mercier, N. Granier, A. Molinari, F. Llorca, F. Buy Multiple necking during the dynamic expansion of hemispherical metallic shells, from experiments to modelling. Journal of the Mechanics and Physics of Solids, 2010, Vol. 58, 955-982. ACL
  • S. Philippon, G.Z. Voyiadjis, L. Faure , A. Lodygowski, A. Rusinek, P. Chevrier, E. Dossou, A Device Enhancement for the Dry Sliding Friction Coefficient Measurement between Steel 1080 and VascoMax with Respect to Surface Roughness Changes, Journal Experimental Mechanics. ACL
  • G. SUTTER, N. RANC, Flash temperature measurement during dry friction process at high speed sliding speed, Wear, 268 (2010) 1237-1242. ACL
  • A. Kellou, J.M. Raulot, T. Grosdidier , Structural and thermal properties of Fe3Al, Fe3AlC and hypothetical Fe3AlX (X=H, B, N, O) compounds: Ab initio and quasi-harmonic Debye modelling, Intermetallics, 18 (2010) 1293-1296. ACL
  • X. Li, Y. Fautrelle, Z. Ren, Y. Zhang, C. Esling, Effect of a high magnetic field on the AlAl3Ni fiber eutectic during directional solidification, Acta Mater., 58 (2010) 2430-2441. ACL
  • X. Li, Y. Fautrelle, K. Zaidat, A. Gagnoud, Z. Ren, R. Moreau, Y. Zhang, C. Esling, Columnar-to-equiaxed transitions in al-based alloys during directional solidification under a high magnetic field , J. Cryst. Growth, 312 (2010) 267-272. ACL
  • X. Li, Z. Ren, Y. Fautrelle, Y. Zhang, C. Esling, Morphological instabilities and alignment of lamellar eutectics during directional solidification under a strong magnetic field, Acta Mater., 58 (2010) 1403-1417. ACL
  • Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Yandong Wang, Liang Zuo, New approach to twin interfaces of modulated martensite, J. Appl. Cryst., 43 (2010) 617-622. ACL
  • J. Wu, T. Grosdidier, N. Allain-Bonasso, E. Gaffet, C. Dong, On the mechanically induced crystallization of FCC phases by mechanical milling in ZrAlNiCu bulk metallic glasses, Journal of Alloys and Compounds, (504): Supplément 1, S264-S266 AUG 2010 ACL
  • B. L. Wu, G. Wan, Y. D. Zhang, X. H. Du, F. Wagner, C. Esling, Fragmentation of large grains in AZ31 magnesium alloy during ECAE via route A, Mater. Sci. Eng. A, 527 (2010) 3365-3372. ACL
  • G. Wan, B. L. Wu, Y. D. Zhang, G. Y. Sha, C. Esling, Anisotropy of dynamic behavior of extruded AZ31 magnesium alloy, Mater. Sci. Eng. A, 527 (2010) 2915-2924. ACL
  • B. L. Wu, G. Wan, Y. D. Zhang, C. Esling, Twinning characteristics in textured AZ31 alloy under impact loading along specified direction, Mater. Lett., 64 (2010) 636-639. ACL
  • B. L. Wu, Y. H. Zhao, X. H. Du, Y. D. Zhang, F. Wagner, C. Esling, Ductility enhancement of extruded magnesium via yttrium addition, Mater. Sci. Eng. A, 527 (2010) 4334-4340. ACL
  • Z.Y. Yin, M. Hattab, P.Y. Hicher, 2010, Multiscale modeling of a sensitive marine clay, International journal for numerical and analytical methods in geomechanics. In press [DOI: 10.1002/nag.977]. ACL
  • L. Li, Y. Zhang, C. Esling, H. Jiang, Z. Zhao, Y. Zuo, J. Cui, Crystallographic features of primary Al3Fe phase, J. Appl. Cryst., 43 (2010) 1108-1112. ACL
  • F. Sun, S. Nowak, T. Gloriant, P. Laheurte, A. Eberhardt, F. Prima, Influence of a short thermal treatment on the superelastic properties of a titanium based alloy, Scripta Materialia, 63 (2010) 1053-1056. ACL
  • M. HUMBERT, N. GEY, C. PATAPY, E. JOUSSEIN, M. HUGER, R. GUINEBRETIÈRE, T. CHOTARD, A. HAZOTTE, Identification and orientation determination of parent cubic domains from EBSD maps of monoclinic pure zirconia, Scripta Mater. 63 (2010) 411-414. ACL
  • A. RUSINEK, J.A. RODRIGUEZ-MARTINEZ, R. PESCI, J. CAPELLE, Experimental characterization and modeling of the thermo-viscoplastic behaviour of the steel AISI 304 within wide ranges of strain rate at room temperature, Journal of Theoretical and Applied Mechanics 48, 2010, 1027-1042. ACL
  • J.A. RODRIGUEZ-MARTINEZ, R. PESCI, A. RUSINEK, R. ZAERA, A. ARIAS, D.A. PEDROCHE, Thermo-mechanical behaviour of TRIP 1000 steel sheets subjected to low velocity perforation by conical projectiles at different temperatures, International Journal of Solids and Structures 47, 2010, 1268-1284. ACL
  • S. Nezamabadi, H. Zahrouni, J. Yvonnet, M. Potier-Ferry. A multiscale finite element approach for buckling analysis of elastoplastic long fiber composites, International Journal for Multiscale Computational Engineering. Vol 8, No 3, pages: 287-301, 2010 ACL
  • H. Ait-Amokhtar and C. Fressengeas, Crossover from continuous to discontinuous propagation in the Portevin – Le Chatelier effect, Acta Mater. 58,1342–1349, 2010. ACL
  • L. Girod, V. Berry-Kromer, T. Ben Zineb, A. Eberhardt, E. Patoor, B. Prandi, Evaluation of the immediate post-operative bone-implant condition of a proximal interphalangeal joint prosthesis by a comparative FEA modelling, International Journal on Interactive Design and Manufacturing, Vol.4, pp. 157-167, 2010. ACL
  • S. SUWAS, B. BEAUSIR, L.S. TOTH, J.J. FUNDENBERGER, G. GOTTSTEIN, Texture evolution in commercially pure Titanium after warm equal channel angular extrusion, Acta Materialia, 59 (2010) 1121-1133. ACL
  • D. Goran, J.J. Fundenberger, E. Bouzy, W. Skrotzki, S. Suwas, T. Grosdidier, L.S. Toth, Local texture and microstructure in cube oriented Nickel single crystal deformed by equal channel angular extrusion, Philisophical Magazine, DOI: 10.1080/14786435.2010.519352, 2010. ACL
  • L.S. Toth, B. Beausir, C.F. Gu, Y. Estrin, N. Scheerbaum, C.H.J. Davies, Effect of grain refinement by severe plastic deformation on the next-neighbour misorientation distribution, Acta Materialia, doi:10.1016/j.actamat.2010.08.036, 2010. ACL
  • C.F. Gu, L.S. Toth, R. Lapovok, C.H.J. Davies, Texture evolution and grain refinement of ultrafine-grained copper during micro-extrusion, Philisophical Magazine, 91(2010) 273- 290. ACL
  • E. Ozlu, A. Molinari, E. Budak, TWO-ZONE ANALYTICAL CONTACT MODEL APPLIED TO ORTHOGONAL CUTTING, MACHINING SCIENCE AND TECHNOLOGY, 14 (2010) 323-343. ACL
  • Y.B. Gu, S. Zhuang, M. Vural, A. Molinari, G. Ravichandran, Upstream jetting phenomenon in planar shock wave experiments with ceramic powders, SHOCK WAVES, 20 (2010) 387-393. ACL
  • Y.D. Zhang, Z.B. Li, C. Esling, J. Muller, X.A. Zhao, L.A. Zuo, A general method to determine twinning elements, J. Appl. Cryst., 43 (2010) 1426-1430. ACL
  • X. Li, Z.M. Ren, Y. Fautrelle, Y.D. Zhang, C. Esling, Effects on high magnetic fields on the microstructure of Al-Al2Cu eutectic, Mater. Lett., 64 (2010) 2597-2600. ACL
  • Z.B. Li, J.J. Wang, Y.D. Zhang, K.Z. He, X.A. Zhao, L.A. Zuo, G. Hofer, C. Esling, Texturation of Ni-Co-Mn-In Ribbons by Melt Spinning, Adv. Eng. Mater., 12 (2010) 1024-1028. ACL
  • L. Bao, J.S. Lecomte, C. Schuman,M.J. Philippe, X.A. Zhao, C. Esling,Study of Plastic Deformation in Hexagonal Metals by Interrupted In-Situ EBSD Measurement, ADVANCED ENGINEERING MATERIALS, 12 (2010) 1053-1059. ACL
  • S. Li, G.W. Qin, Y.D. Zhang, W.L. Pei, L.A. Zuo, C. Esling, Anisotropic Growth of Iron Oxyhydroxide Nanorods and their Photocatalytic Activity, Adv. Eng. Mater., 12 (2010) 1082-1085. ACL
  • J. Bai, J.M. Raulot, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo, Defect formation energy and magnetic structure of shape memory alloys Ni-X-Ga (X=Mn, Fe, Co) by first principle calculation, J. Appl. Phys., 108 (2010) 064904. ACL
  • L. Bao, C. Schuman, J.S. Lecomte, M.J. Philippe, X.A. Zhao, L.A. Zuo, C. Esling, Study of Deformation Mechanisms in Titanium by Interrupted Rolling and Channel Die Compression Tests, CMC-COMPUTERS MATERIALS & CONTINUA, 15 (2010) 113-127. ACL
  • M. Bilasse, E.M. Daya, L. Azrar, Linear and nonlinear vibrations analysis of viscoelastic sandwich beams , Journal of Sound and Vibration, 329 (2010) 4950-4969. ACL
  • O. MAUREL, T. REESS, M. MATALLAH, A. DE FERRON, W. CHEN, C. LA BORDERIE, G. PIJAUDIER-CABOT, A. JACQUES, F. REY-BETHBEDER, Electrohydraulic shock wave generation as a means to increase intrinsic permeability of mortar, Cement and Concrete Research, 40 (2010) 1631–1638. ACL
  • S. Bahi, M. Nouari, A. Moufki, M. EL Mansori, A. Molinari,“A thermo-mechanical model of friction phenomena in machining: analysis of the sliding-sticking zones at the tool-chip interface”,Tribology of manufacturing processes, 2010, pp 97-110, ISBN: 978-2-911256-27-1. ACL
  • F. Mohri, N. Damil, M. Potier-Ferry, Linear and non-linear stability analyses of thin-walled beams with monosymmetric I sections, Thin-Walled Structures. 48 (2010) 299-315. ACL
  • P. Forquin, B. Erzar. Dynamic fragmentation process in concrete under impact and spalling tests Int. J. Fracture, 163, pp. 193-215, 2010 ACL
  • Malerba L, Ackland GJ Becquart CS , Bonny G, Domain C, Dudarev SL, Fu CC , Hepburn D, Marinica MC, Olsson P, Pasianot RC, Raulot JM, Soisson F, Terentyev D, Vincent E, Willaime F. Ab initio calculations and interatomic potentials for iron and iron alloys: Achievements within the Perfect Project JOURNAL OF NUCLEAR MATERIALS Volume: 406 Issue: 1 Pages: 7-18 Published: NOV 1 2010 ACL
  • E. Ozlu, A. Molinari, E. Budak, “Two-zone analytical contact model applied to orthogonal cutting” , Machining Science and Technology, 14, 323-343, 2010 ACL
  • Cadou JM, Potier-Ferry M, A solver combining reduced basis and convergence acceleration with applications to non-linear elasticity,  INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING, 26 (2010) 1604-1617. ACL
  • PL Bonanno , S. Gautier ,AA Sirenko,A Kazimirov, ZH Cai, WH Goh, J Martin, A Martinez, T Moudakir, N Maloufi, MB Assouar, A Ramdane, L Le Gratiet, A Ougazzaden, Submicron beam X-ray diffraction of nanoheteroepitaxily grown GaN: Experimental challenges and calibration procedures, Nuclear Instruments and Methods in Physics Research B 268 (2010) 320–324 Issue: 3-4 Pages: 320-324 ACL
  • Petit E.J., Grosbety Y. , Aden-Ali S. , Gilgert J., Azari  Z. , Microstructure of the coating and mechanical properties of galvanized chromium-rich martensitic steel.  Surf. Coat. Technol.  205 (2010) 2404-2411.  ACL
  • P. BLAINEAU, L. GERMAIN, M. HUMBERT, N. GEY, A new approach to calculate the gamma orientation maps in steels,Solid State Phenomena 160 (2010) 203-210 ACL
  • N. Damil N, M. Potier-Ferry, Influence of local wrinkling on membrane behaviour: A new approach by the technique of slowly variable Fourier coefficients, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 58 (2010) 1139-1153. ACL
  • Merzouki T., Collard C., Bourgeois N., Ben Zineb T., Meraghni F., Coupling between measured kinematic fields and multicrystal SMA finite element calculations, Mechanics of Materials, 42, (2010), 72-95. ACL
  • Numerical analysis for predicting the rolling contact fatigue crack initiation in a railway wheel steel, Taraf M, Zahaf EH, Oussouaddi O, Zeghloul A, TRIBOLOGY INTERNATIONAL , 43 (2010) 585-593. ACL
  • Evolution of the AgCdO Contact Material Surface Microstructure with the Number of Arcs, Pons F, Cherkaoui M, Ilali I, Dominiak S, JOURNAL OF ELECTRONIC MATERIALS, 39 (2010) 456-463. ACL
  • J.M. Cadou, M. Potier-Ferry, A solver combining reduced basis and convergence acceleration with application to non-linear elasticity, International Journal for Numerical Methods in Biomedical Engineering (Communications in Numerical Methods in Engineering), 26 (2010) 1604-1617. ACL
  • Koné F., Czarnota C., Haddag B., Nouari M., Finite element modeling of the thermomechanical behavior of coatings under extreme contact loading in dry machining, Surface and Coatings Technology 205 3559-3566, 2011 - http://dx.doi.org/10.1016/j.surfcoat.2010.12.024 ACL
  • V. TAUPIN, S. BERBENNI, C. FRESSENGEAS, O. BOUAZIZ. On Particle Size Effects: an Internal Length Mean Field Approach using Field Dislocation Mechanics. Acta Materialia, 58 (2010), 5532-5544.
    ACL
  • C. PERRIN, S. BERBENNI, H. VEHOFF, M. BERVEILLER. Role of discrete intra-granular slip on lattice rotations in polycrystalline Ni: Experimental and micromechanical studies. Acta Materialia, 58 (2010), 4639-4649. ACL
  • S. BERBENNI, M. CHERKAOUI. Homogenization of multi-coated inclusion reinforced linear elastic composites with eigenstrains: application to the thermo-elastic behavior. Philosophical Magazine, 90 (2010), 3003-3026. ACL
  • M. Hamdaoui, Chaskalovic. J, Sagaut. P, Using multiobjective evolutionary algorithms and data mining methods to optimize bird-like UAVs' kinematics. Journal of Aircraft 47(5), 1504-1516 (2010),doi:10.2514/1.45046 ACL
  • G. ALTMEYERF. ABED-MERAIM, T. BALAN, Investigation of some localization criteria and their relevance to prediction of forming limit diagrams, Steel Research International, 81(9) (2010) 1364-1367. ACL
  • Grosdidier T., Zhang X.D., Wu J., Allain-Bonasso N., Zhang K.M., Zou J.X., Qin Y., Li X.N., Hao S.Z., Dong C.A., Crater Eruption Induced by High Current Pulsed Electron Beam (HCPEB) Treatment, Materials Science Forum, 654-656, p. 1700-1703, 2010 ACL
  • Kellou A., Raulot J. M., Grosdidier T., Structural and thermal properties of Fe3Al, Fe3AlC and hypothetical Fe3AlX (X = H, B, N, O) compounds: Ab initio and quasi-harmonic Debye modeling, INTERMETALLICS, 18, p.1293-1296, 2010 ACL
  • Grosdidier T., Goran D., Ji G., N. Llorca, On the processing of hetero-nanostructured metals for improved strength/ductility balance by ECAE and SPS techniques, JOURNAL OF ALLOYS AND COMPOUNDS, 504, p. S456-S459, 2010 ACL
  • Zou J. X., Grosdidier T., Zhang K. M., Hao S. Z., Dong C., Mechanisms of hardening, wear and corrosion improvement of 316 L stainless steel by low energy high current pulsed electron beam surface treatment, THIN SOLID FILMS, 519, p. 1404-1415, 2010 ACL
  • S. R. Dey, L. Hollang, B. Beausir, E. Hieckmann, W. Skrotzki, Shearing banding cyclic deformation of sub-microcrystalline nickel, Scripta Materialia, 62 (2010) 770-773. ACL
  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmittonnet, N. Legrand, P. Buessler, Modélisation numérique du flambage de plaques minces et applications au laminage, Mécanique et Industries, 10 (2009) 305-309. ACL
  • G. FRANZ, F. ABED-MERAIM, T. BEN ZINEB, X. LEMOINE, M. BERVEILLER, Strain localization analysis using a multiscale model, Computational Materials Science, 45(3) (2009) 768-773. ACL
  • M. ARZAGHI, B. BEAUSIR, L.S. TOTH, Contribution of non-octahedral slip to texture evolution of fcc polycrystals in simple shear, Acta Mater., doi:10.1016/j.actamat.2009.01.041 ACL
  • B. BEAUSIR, S. BISWAS, D. I. KIM, L. S. TOTH, S. SUWAS, Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling, Acta Mater., 57 (2009) 5061-5077. ACL
  • E. Béchet, N. Moës, B. Wohlmuth, A stable Lagrange multiplier space for the stiff interface conditions within the extended finite element method, Int. J. for Numerical Methods in Engineering, 78 (2009) 931-954. ACL
  • E. Béchet, M. Scherzer, M. Kuna, Application of the X-FEM to the fracture of piezoelectric materials, Int. J. Numerical Methods in Engineering, 77 (2009) 1535-1565. ACL
  • S. Belouettar, H. Boudaoud, E.M. Daya, M. Potier-Ferry, A numerical method for nonlinear complex modes of active-passive vibration damped sandwich structures, Engineering Structures, 31 (2009) 284-291. ACL
  • X.F. Bi, G. List, Y.X. Liu, Calculation of Material Flow in Orthogonal Cutting by Using Streamline Model, Key Engineering Materials 407-408 (2009) 490-493. ACL
  • X.F. BI, G. LIST, G. SUTTER, A. MOLINARI, Y.X. LIU, Determination of Chip Velocity Field in Metal Cutting, Applied Mechanics and Materials, 16-19 (2009) 471-474. ACL
  • M. Bilasse, I. Charpentier, E.M. Daya, Y. Koutsawa, A generic approach for the solution of nonlinear residual equations. Part II: Homotopy and complex nonlinear eigenvalue method, Computer Methods in Applied Mechanics and Engineering, doi:10.1016/j.cma, 2009. ACL
  • H. Boudaoud, E.M. Daya, S. Belouettar, M. Potier-Ferry, A numerical method for nonlinear complex modes of active-passive vibration damped sandwich structures, Engineering Structures, 31 (2009) 384-391. ACL
  • J.M. Cadou, L. Duigou, N. Damil, M. Potier-Ferry, Convergence acceleration techniques of iterative algorithms for nonlinear problems, Computational Mechanics, (2009) 253-264. ACL
  • Chang CS., Hicher P.Y., Daouadji A., (2009), “Investigating instability in granular materials by means of a micro-structural model”, European Journal of Environmental and Civil Engineering, 13, 3,167-186 ACL
  • Y. Chemisky, A. Duval, B. Piotrowski, T. Ben Zineb, V.L. Tahiri, E. Patoor, Numerical tool for SMA materials'simulation - application to composite structure design, Smart Materials and Structure, 18 (2009) 104012. ACL
  • Daouadji A., Darve F, Al Gali H., Lejeune A., Jrad M., (2009). “Experimental and numerical analysis of failure in very loose sands”, European Journal of Environmental and Civil Engineering, 13, 3,149-165 ACL
  • A. Diop, N. Maurel, M. Oiknine, E. Patoor, P. Matchou, A novel platform for in vitro analysis of torques, forces and three-dimensional file displacement during root canal preparations: Application to ProTaper Rotary Files, J. Endodontics, 35 (2009) 568-572. ACL
  • L. DURRENBERGER, A. MOLINARI, Modeling of temperature and strain-rate effects in metals using an internal variable model, Experimental Mechanics, 49 (2009) 247-255. ACL
  • B. HADDAG, F. ABED-MERAIM, T. BALAN, Strain localization analysis using a large deformation anisotropic elastic–plastic model coupled with damage, International Journal of Plasticity, 25(10) (2009)1970-1996. ACL
  • C. Fressengeas, A.J. Beaudoin, D. Entemeyer, T. Lebedkina, M. Lebyodkin, V. Taupin, Dislocation transport and intermittency in the plasticity of crystalline solids, Phys. Rev. B, 79 (2009) 014108. ACL
  • G. ALTMEYERF. ABED-MERAIM, T. BALAN, Formability prediction of thin metal sheets using various localization criteria, International Journal of Material Forming, 2(1) (2009) 423-426. ACL
  • A. HASANI, L.S. TOTH, A fan-type flow line model in equal channel angular extrusion, Scripta Materialia, 61 (2009) 24-27. ACL
  • H. Hu, S. Belouettar, M. Potier-Ferry, A. Makradi, A novel finite element for global and local buckling analysis of sandwich beams, Composites Structures, 90 (2009) 270-278. ACL
  • F. Jemal, T. Bouraoui, T. Ben Zineb, E. Patoor, C. Bradai, Modelling of Martensitic transformation and plastic slip effects on the thermomechanical behaviour of Fe-based shape memory alloys, Mechanics of Materials, 41 (2009) 849-856. ACL
  • Z. JENDLI, F. MERAGHNI, J. FITOUSSI, D. BAPTISTE, Multi-scale modelling of dynamic behaviour for discontinuous fibre SMC composites, Composites Science and Technology, 69 (2009) 97-103. ACL
  • Khadri Y., Tekili S., Daya E. M., Daouadji A., Guenfoud M., Merzoug B., (2009), Analysis of the dynamic response of bridges under moving loads, International Review of Mechanical Engineering, 3, 91-99 ACL
  • J.R. Klepaczko, A. Rusinek, J.A. Rodriguez-Martinez, et al., Modelling of thermo-viscoplastic behaviour of DH-36 and Weldox 460-E structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations for impact problems, Mechanics of Materials, 41 (2009) 599-621. ACL
  • R. LAPOVOK, L.S. TOTH, A. MOLINARI, Y. ESTRIN, Strain localization patterns under equal channel angular extrusion, J. Mech. Physics of Solids, 57 (2009) 122-136. ACL
  • G. List, D. Géhin, A. Kusiak, J.L. Battaglia, F. Girot, Heat Flux and Temperature at the Tool-Chip Interface in Dry Machining of Aeronautic Aluminium Alloy, J. Manufacturing Techn., 1 (2009) 103-116. ACL
  • G. List, G. Sutter, X.F. Bi, Investigation of tool wear in High Speed Machining by using a ballistic set-up, Wear, 267 (2009) 1673-1679. ACL
  • S. MERCIER, A. MOLINARI, Homogenization of elastic-viscoplastic heterogeneous materials: Self-consistent and Mori-Tanaka schemes, Int. J. Plasticity, 25 (2009) 1024-1048. ACL
  • T. Merzouki, C. Collard, N. Bourgeois, F. Meraghni, T. Ben Zineb, Dialogue entre expérience et simulation numérique pour un multicristal en alliage à mémoire de forme, Mécanique et Industrie, 10, (2009), 267-274. ACL
  • T. MERZOUKI, F. MERAGHNI, H. CHALAL, T. BEN ZINEB, Comparaison de configurations d'essais hétérogènes en vue d'améliorer l'identification du comportement élastique orthotrope par l'erreur en relation de comportement, Mécanique et Industrie, in press. ACL
  • M.H. Miguelez, R. Zaera, A. Molinari, R. Cheriguene, A. Rusinek, Residual Stresses in Orthogonal Cutting of Metals: The Effect of Thermo-Mechanical Coupling Parameters and of Friction, J. Thermal Stresses, 32 (2009) 269-289. ACL
  • A. Molinari, C. Daraio, Stationary shocks in periodic highly nonlinear granular chains, Phys. Rev. E, 80, 056602, 2009. ACL
  • S. Nezamabadi, J. Yvonnet, H. Zahrouni, M. Potier-Ferry, A multilevel computational strategy for handling microscopic and macroscopic instabilities, Computer Methods in Applied Mechanics and Engineering, 198 (2009) 2099-2110. ACL
  • E. OZLU, E. BUDAK, A. MOLINARI, Analytical and experimental investigation of rake contact and friction behaviour in metal cutting, Int. J. Machine Tools and Manufacture, doi:10.1016/j.ijmachtools.2009.05.005. ACL
  • M. Rabahallah, T. Balan, F. Barlat, Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity, Int. J. Solids and Structures, 46 (2009) 1966-1974. ACL
  • M.S. Rechdaoui, L. Azrar, S. Belouettar, E.M. Daya, M. Potier-Ferry, Active vibration control of piezoelectric sandwich beams at large amplitudes, Mechanics of Advanced Materials and Structures, 16 (2009) 98-109. ACL
  • N. Siredey-Schwaller, A. Eberhardt, P. Bastie, Parameters influencing the fatigue life of a Cu-Al-Be monocrystalline shape memory alloy under repeated bending, Smart Materials & Structures, 18 (2009). ACL
  • L.S. TOTH, A. OLINARI, O. BOUAZIZ, Effective strain rate sensitivity of two phase materials, Mater. Sci. Eng. A, doi:10.1016/j.msea.2009.06.041. ACL
  • S. Varadhan, A.J. Beaudoin, C. Fressengeas, Polar dislocations and strain aging of single crystals, J. Mech. Phys. Solids, 57 (2009) 1733-1748. ACL
  • Aden-Ali S., Chamat A., Gilgert J., Petit E.J., Dominiak S., Schmitt L., Gilles M., Azari Z. On the degradation of the endurance of silicon-rich TRIP800 steel after hot-dip galvanization.  Eng. Failure Anal. 16 (2009) 2009-2019. ACL
  • D. Y. Cong, Y. D. Zhang, C. Esling, Y. D.Wang, X. Zhao, L. Zuo, Determination of Crystal Structure and Crystallographic Characteristics in Ni-Mn-Ga Ferromagnetic Shape Memory Alloys, International Journal of Modern Physics B, 23 (2009) 1771-1776. ACL
  • S. DEY, A. HAZOTTE, E. BOUZY, Crystallography and phase transformation mechanisms in TiAl-based alloys - A synthesis, Intermetallics, 17 (2009) 1052-1064. ACL
  • F. GERSPACH, N. BOZZOLO, F. WAGNER, About texture stability during primary recrystallization of cold-rolled low alloyed zirconium, Scripta Mater., 60, pp.203-206, 2009 ACL
  • W. H. GOH, J. MARTIN, S. OULD-SAAD, S. GAUTIER, A. A. SIRENKO, A. MARTINEZ, L. LE GRATIET, A. RAMDANE, N. MALOUFI, A. OUGAZZADEN, Selective growth of GaN nanodots and nanostripes on 6H-SiC substrates by metal organic vapor phase epitaxy, Physica Status Solidi C, 6 (2009) 510-S513. ACL
  • M. HUMBERT, A. MOREAU, E. UTA, N. GEY, P. BOCHER, C. BESCOND, Analysis of Backscattered Ultrasound Amplitude of Ti-5.8Al-4Sn-3.5Zr-0.7Nb-0.5Mo-0.3Si Samples in terms of their Microstructures and Local Textures, Acta Mater., 57 (2009) 708-714. ACL
  • X. LI, Y. FAUTRELLE, Z. REN, A. GAGNOUD, R. MOREAU, Y.D. ZHANG, C. ESLING, Effect of a high magnetic field on the morphological instability and irregularity of the interface of a binary alloy during directional solidification, Acta Mater., 57 (2009) 1689-1701. ACL
  • X. LI, Z. REN, Y. FAUTRELLE, A. GAGNOUD, Y.D. ZHANG, C. ESLING, Degeneration of columnar dendrites during directional solidification under a high magnetic field, Scripta Mater., 60 (2009) 443-446. ACL
  • S. LI, Y.D. ZHANG, C. ESLING, J. MULLER, J.S. LECOMTE, G.W. QIN, X. ZHAO, L. ZUO, Determination of surface crystallography of faceted nanoparticles using transmission electron microscopy imaging and diffraction modes, J. Appl. Cryst., 42 (2009) 519-524. ACL
  • L. LI, Y.D. ZHANG, C. ESLING, Z.H. ZHAO, Y.B. ZUO, H.T. ZHANG, J.Z. CUI, Formation of feathery grains with the application of a static magnetic field during direct chill casting of Al-9.8wt%Zn alloy, J. Mater. Sci., 44 (2009) 1063-1068. ACL
  • L. LI, Y.D. ZHANG, C. ESLING, Z.H. ZHAO , Y.B. ZUO, H.T. ZHANG, J.Z. CUI, Formation of twinned lamellas with the application of static magnetic fields during semi-continuous casting of Al-0.24wt%Fe alloy, J. Crystal Growth, 311 (2009) 3211-3215. ACL
  • X. LI, Y.D. ZHANG, Y. FAUTRELLE, Z.M. REN, C. ESLING, Experimental evidence for liquid/solid interface instability caused by the stress in the solid during directional solidification under a strong magnetic field, Scripta Mater., 60 (2009) 489-492. ACL
  • A. SANKARAN, E. BOUZY, J.J. FUNDENBERGER, A. HAZOTTE, Texture and microstructure evolution during tempering of gamma-massive phase in a Ti-Al based alloy, Intermetallics, 17 (2009) 1007-1016. ACL
  • S. SANKARAN, E. BOUZY, M. HUMBERT, A. HAZOTTE, Variant selection during nucleation and growth of gamma massive phase in TiAl-based intermetallic alloys, Acta Mater., 57 (2009) 1230-1242. ACL
  • R. PESCI, K. INAL, R. MASSON, A three scale polycrystalline modeling of behavior of a 16MND5-A508 bainitic steel: stress distribution at low temperatures, Materials Science Engineering A 527, 2009, 376-386. ACL
  • T. Böhlke, G. Bondár, Y. Estrin, M.A. Lebyodkin (Lebedkin), Geometrically Non-Linear Modeling of the Portevin-Le Chatelier Effect, Comp. Mater. Sci. 44, (2009) 1076-1088 ACL
  • Abdelkhalek S, Zahrouni H, Potier-Ferry M, P. Montmitonnet, N. Legrand, P. Buessler. Thin sheet buckling modeling and applications for strip rolling, MECANIQUE & INDUSTRIES Volume: 10 Issue: 3-4 Pages: 305-309, 2009. ACL
  • S. Bahi, A. Moufki, M. Nouari, M. EL Mansori, A. Molinari, “Analysis of tribological parameters during machining”, International Journal of Material Forming, 2009, 2 (1), 221-224 ACL
  • Rerbal B, Merad G, Mariette H, Faraoun HI, Raulot JM Ab initio investigation of the CdTe (001) surface Source: SUPERLATTICES AND MICROSTRUCTURES Volume: 46 Issue: 5 Pages: 733-744 Published: NOV 2009 ACL
  • J.-M. PIPARD, N. NICAISE, S. BERBENNI, O. BOUAZIZ, M. BERVEILLER. A new mean field micromechanical approach to capture grain size effects. Computational Materials Science, 45 (2009), 604-610.
    ACL
  • T. RICHETON, S. BERBENNI, M. BERVEILLER. Grain-size dependent accommodation due to intragranular distributions of dislocation loops. Acta Materialia, 57 (2009) 1347-1356.
    ACL
  • Petit E.J., Elia J., Lecomte JS, Pitchon V. and Gay B., Microstructure and texture of the inhibition layer in hot-dip galvanized coatings. Mechanisms of growth and destruction, Netsu shori , J. Jpn. Soc. Heat Treat., 49, (2009), 233-236 ACL
  • V.D. TRINH, F. ABED-MERAIM, A. COMBESCURE, A new prismatic solid–shell element ‘SHB6’: assumed-strain formulation and evaluation on benchmark problems, Vietnam Journal of Mechanics, 31(4) (2009) 279-292. ACL
  • F. ABED-MERAIM, A. COMBESCURE, An improved assumed strain solid–shell element formulation with physical stabilization for geometric nonlinear applications and elastic-plastic stability analysis, International Journal for Numerical Methods in Engineering, 80(13) (2009) 1640-1686. ACL
  • G. FRANZF. ABED-MERAIM, J.P. LORRAIN, T. BEN ZINEB, X. LEMOINEM. BERVEILLER, Ellipticity loss analysis for tangent moduli deduced from a large strain elastic–plastic self-consistent model, International Journal of Plasticity, 25(2) (2009) 205-238. ACL
  • T. MERZOUKI, F. MERAGHNI, H. CHALAL et T. BEN ZINEB, Comparaison de configurations d’essais hétérogènes en vue d’améliorer l’identification du comportement élastique orthotrope par l’erreur en relation de comportement, Mécanique et Industrie, Vol 10, (2009), pp. 351–364. DOI: 10.1051/meca/2009069. ACL
  • Zou J.X., Grosdidier T., Zhang K.M., Dong C.Cross-sectional analysis of the graded structure in an AISI D2 steel treated with low energy high current pulsed electron beam Applied Surface Science, 255, 4758-4764, 2009 ACL
  • Qin Y., Dong C., Song Z.F., Hao S.Z., Me X.X., Li J.A., Wang X.G., Zou J.X., Grosdidier T.Deep modification of materials by thermal stress wave generated by irradiation of high-current pulsed electron electron beam J. Vacuum Science & Technology A, 27, 430-435, 2009 ACL
  • M. Abbadi, S. Belouettar, P. Muzzo, O. Oussouaddi, A. Zeghloul, On low cycle fatigue life of nickel base superalloy valve membranes under non proportional cycling loading, Int. J. Fatigue, 30 (2008) 1160-1168. ACL
  • H. Ait-Amokhtar, C. Fressengeas, S. Boudrahem, The dynamics of Portevin-Le Chatelier bands in an Al-Mg alloy from infrared thermography, Mat. Sci. Eng. A, 488 (2008) 540-546. ACL
  • B. HADDAG, F. ABED-MERAIM, T. BALAN, Strain localization and damage prediction during sheet metal forming, International Journal of Material Forming,1(1) (2008) 229-232. ACL
  • S. Belouettar, L. Azrar, E.M. Daya, V. Laptev, M. Potier-Ferry, Active control of nonlinear vibration of sandwich piezoelectric beams: A simplified approach, Computers & Structures, 86 (2008) 386-397. ACL
  • M. BENGHERSALLAH, L. BOULANOUAR, A. DEVILLEZ, S. DOMINIAK, D. DUDZINSKI, Morphological investigations in the wear of carbide inserts in milling, International, Review of Mechanical Engineering, 2 (2008) 68-74. ACL
  • L. Capolungo, S. Benkassem, M. Cherkaoui, J. Qu, Self-consistent scale transition with imperfect interfaces: Application to nanocrystalline materials, Acta Mater., 56 (2008) 1546-1554. ACL
  • I. Charpentier, Variational coupling of Plinian column models and data: Application to El Chichon Volcano, J. Volcanology and Geothermal Research, 175 (2008) 501-508. ACL
  • N. Damil, M. Potier-Ferry, A generalized continuum approach to predict instability patterns of thin structures, Revue Européenne de Mécanique Numérique, 17 (2008) 945-956. ACL
  • F. DINZART, A. MOLINARI, R. HERBACH, Thermomechanical response of a viscoelastic beam under cyclic bending; self heating and thermal failure, Arch. of Mech., 60 (2008) 59-85. ACL
  • L. DURRENBERGER, A. MOLINARI, A. RUSINEK, Internal variable modelling of the high strain-rate behaviour of metals with applications to multiphase steels, Mater. Sci. Eng. A, 478 (2008) 297-304. ACL
  • M. Iordache, N. Bourgeois, L.P. Moreira, M. Martiny, G. Ferron, Experimental and numerical analysis of the formability of anisotropic steel sheet, Int. Review of Mechanical Engineering, (IREME), 2 (2008) 186-193. ACL
  • P. Forquin, A. Arias, R. Zaera, Role of porosity in controlling the mechanical and impact behaviours of cement-based materials, Int. J. Impact Eng., 35: 133-146, 2008. ACL
  • P. FRANCIOSI, S. BERBENNI, Multi-laminate plastic-strain organization for non-uniform TFA modeling of poly-crystal regularized plastic flow, International Journal  of Plasticity, 24 (2008) 1549-1580. ACL
  • A. Giraud, R. Giot, F. Homand, Poromechanical modelling and inverse approach of drying tests on weakly permeable porous rocks, Transport in Porous Media, DOI 10.1007/s11242-008-9229-5, 2008. ACL
  • A. Giraud, D. Hoxha, D.P. Do, V. Magnenet, Effect of pore shape on effective thermoporoelastic properties of isotropic rocks, Int. J. Solids and Structures, 45 (2008) 1-23. ACL
  • S. Grange, P. Forquin, S. Mencacci, F. Hild, On the dynamic fragmentation of two limestones using edge-on impact tests , Int. J. Impact Eng., 35: 977-991, 2008. ACL
  • A. HASANI, R. LAPOVOK, L.S. TOTH, A. MOLINARI, Deformation field variations in equal channel angular extrusion due to back pressure, Scripta Mater., 58 (2008) 771-774. ACL
  • H. Hu, S. Belouettar, M. Potier-Ferry, E.M. Daya, Multi-scale modeling of sandwich structures using the Arlequin method (Part I: linear modeling), Finite Elements in Analysis and Design, 45 (2008) 37-51. ACL
  • H. Hu, S. Belouettar, M. Potier-Ferry, E.M. Daya, Review and Assessment of Various Theories for Modeling Sandwich Composites, Composite Structures, 84 (2008) 282-292. ACL
  • Y. Koutsawa, I. Charpentier, E.M. Daya, M. Cherkaoui, A generic approach for the solution of nonlinear residual equations. Part I: the diamant toolbox, Computer Methods in Applied Mechanics and Engineering, 198 (2008) 572-577. ACL
  • T.A. Lebedkina, M.A. Lebyodkin, Effect of deformation geometry on the intermittent plastic flow associated with the Portevin-Le Chatelier effect, Acta Mater., 56 (2008) 5567-5574. ACL
  • M.A. Lebyodkin, T.A. Lebedkina, Multifractality and randomness in the unstable plastic flow near the lower strain-rate boundary of instability, Phys. Rev. E, 77 (2008) 02611(1-8). ACL
  • F. Mahfoudi, G. List, A. Molinari, A. Moufki, L. Boulanouar, High speed turning for hard material with PCBN inserts: toll wear analysis, Int. J. Machining and Machinability of Materials, 3 (2008) 62-79. ACL
  • F. Mohri, C. Bouzerira, M. Potier-Ferry, Lateral buckling of thin-walled Beam-column elements under combined axial and bending loads, Thin-Walled Structures, 46 (2008) 290-302. ACL
  • F. Mohri, A. Eddinari, N. Damil, M. Potier-Ferry, A beam finite element for non linear analyses of thin-walled elements, Thin-Walled Structures, 46 (2008) 981-990. ACL
  • A. MOLINARI, J.F. MOLINARI, Theoretical basis of a new criterion for ranking scientific institutions based on the h-index, Scientometrics, 75 (2008) 339-356. ACL
  • J.F. MOLINARI, A. MOLINARI, A new methodology for ranking scientific institutions, Scientometrics, 75 (2008) 163-174. ACL
  • A. MOLINARI, A. MOUFKI, The Merchant's model of orthogonal cutting revisited: A new insight into the modelling of chip formation, Int. J. of Mech. Sciences, 50 (2008) 124-131. ACL
  • A. MOLINARI, G. RAVICHANDRAN, Peeling of elastic tapes: Effects of large deformations, pre-straining and peel-zone model, J. Adhesion, 84 (2008) 1-35. ACL
  • G. Mussot-Hoinard, E. Patoor, A. Eberhardt, Influence of wire-drawing on the properties of a CuAlBe polycrystalline Shape Memory Alloy, Mater. Sci. Eng. A, 481-482 (2008) 538-541. ACL
  • M. NADERI, L. DURRENBERGER, A. MOLINARI, W. BLECK, Constitutive relationships for 22MnB5 boron steel deformed isothermally at high temperatures, Mater. Sci. Eng. A, 478 (2008) 130-139. ACL
  • B. Peultier, T. Ben Zineb, E. Patoor, A simplified micromechanical constitutive law adapted to the design of shape memory applications by finite element methods Mater. Sci. Eng. A, 481-482 (2008) 384-388. ACL
  • X. Soldani, A. Moufki, A. Molinari, E. Budak, E. Ozlü, High Speed Machining of AISI 1050 Steel: Modelling and Experimental, Int. J. Material Forming, (2008) 1439-1441. ACL
  • G. SUTTER, N. RANC, A. MOLINARI, V. PINA, Experimental measurement of temperature distribution in the chip generated during high speed orthogonal cutting process, Int. J. Machining and Machinability of Materials, 3 (2008) 52-61. ACL
  • V. Taupin, S. Varadhan, C. Fressengeas, A.J. Beaudoin, Directionality of yield point in strain-aged steels: the role of polar dislocations, Acta Mater., 56 (2008) 3002-3010. ACL
  • G. ALTMEYERF. ABED-MERAIM, T. BALAN, Comparison of forming limit diagrams predicted with different localization criteria, Steel Research International, 79(1) (2008) 24-31. ACL
  • A. BACZMANSKI, P. LIPINSKI, A. TIDU, K. WIERZBANOWSKI, Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steel, J. Appl. Crystallography, 41 (2008) 854-867. ACL
  • D. CONG, S. WANG, Y. WANG, Y. REN, L. ZUO, C. ESLING, Martensitic and magnetic transformation in Ni-Mn-Ga-Co ferromagnetic shape memory alloys, Mater. Sci. Eng. A, 473 (2008) 213-218. ACL
  • C. CORDIER-ROBERT, B. FORFERT, B. BOLLE, J.J. FUNDENBERGER, A. TIDU, Influence of torsion deformation on microstructure of cold-drawn pearlitic steel wire, J. Mater. Sci., 43 (2008) 1241-1248. ACL
  • S. DEY, S. SUWAS, J.J. FUNDENBERGER, T. GROSDIDIER, Evolution of hot rolling texture in beta (B2)-phase of a two-phase (O+B2) titanium-aluminide alloy, Mater. Sci. Eng. A, 483 (2008) 551-554. ACL
  • S. GUESSASMA, E. SUZON, T. GROSDIDIER, F. WAGNER, Static recrystallisation in an ODS FeAl alloy: The effect of particles on texture and anisotropic grain growth developments, Intermetallics, 16, pp. 1013-1025, 2008 ACL
  • A. KELLOU, T. GROSDIDIER, J. RAULOT, H. AOURAG, Atomistic study of magnetism effect on structural stability in Fe3Al and Fe3AlX (X = H, B, C, N, O) alloys, Physica Status Solidi B, 245 (2008) 750-755. ACL
  • R. MAKKOUK, N. BOURGEOIS, J. SERRI, B. BOLLE, M. MARTINY, M. TEACA, G. FERRON, Experimental and theoretical analysis of the limits to ductility of type 304 stainless steel sheet, Eur. J. Mech. A, Solids Physique et Mathématiques, 27 (2008) 181-194. ACL
  • S. MICHEL, S. DILIBERTO, N. STEIN, B. BOLLE, C. BOULANGER, Characterisation of electroplated Bi2(Te1-xSex)3 alloys, J. Solid State Electrochemistry, 12 (2008) 95-101. ACL
  • J. Y. Song, Y. D. Zhang, X. Zhao, L. Zuo, Effects of high magnetic field strength and direction on pearlite formation in Fe-0.12%C steel, J. Mater. Sci., 43 (2008) 6105-6108. ACL
  • Y. ZHANG, C. ESLING, M. CALCAGNOTTO, M. GONG, H. KLEIN, X. ZHAO, L. ZUO. Effect of a High Magnetic Field on Eutectoid Point Shift and Texture Evolution in 0.81C-Fe Steel, Textures and Microstructures, (2008) 1-6. ACL
  • Y. D. Zhang, C. Esling, D. Y. Cong, X. Zhao, L. Zuo, Orientation relationship, texture and microstructure in Electromagnetic Processed Materials (EPM), Arch. Metall. Mater., 53 (2008) 17-23. ACL
  • Y. Wu, X. Zhao, C. S. He, L. Zuo, C. Esling, Effects of magnetic field direction on texture evolution in a cold-rolled interstitial-free steel sheet during high magnetic field annealing, Ceramic Transaction, 200 (2008) 435-442. ACL
  • A. MORAWIEC, R. PESCI, J.S. LECOMTE, Semiautomatic determination of orientations and elastic strain from Kossel microdiffraction, Ceram. Trans., 201 (2008) 163-169 ACL
  • T. MOUDAKIR, G. ORSAL, N. MALOUFI , A.A. SIRENKO,, S. GAUTIER ., M. BOUCHAOUR , S. OULD SAAD, JP SALVESTRINI, A. OUGAZZADEN, Structural and morphological studies of GaN thin films grown on different oriented LiNbO3 substrates by MOVPE. Eur. Phys. J. Appl. Phys. 43, (2008), p295-299 ACL
  • S. BERBENNI, M. BERVEILLER, T. RICHETON. Intra-granular plastic slip heterogeneities : discrete vs. mean field approaches. International Journal of Solids and Structures 45 (2008) 4147-4172. ACL
  • Elia J., Petit E.J.Lecomte J−S., Pitchon V. , Gay B. TEM study of the inhibition layer of Commercial Hot−Dip Galvanized Steels.  Ceramic Trans. 200 (2008) 131−142. ACL
  • D. Y. Cong, Y. D. Zhang, C. Esling, Y. D.Wang, X. Zhao, L. Zuo, CRYSTALLOGRAPHIC FEATURES DURING MARTENSITIC TRANSFORMATION IN Ni-Mn-Ga FERROMAGNETIC SHAPE MEMORY ALLOYS, Ceramic Transactions, 200 (2008) 397-403. ACL
  • A. JAVILI, G. CHATZIGEORGIOU, A. T. MCBRIDE, P. STEINMANN, C. LINDER, Computational homogenization of nano-materials accounting for size effects via surface elasticity, GAMM-Mitt., 38:2 (2015) 285-312. ACLN
  • M. Alsaleh, C.S Chang, A. Daouadji, U. El Shamy, M. Hattab, P-Y. Hicher, M. Kuhn, S. Ji, B. Li, S. Li, A. Misra, J-N. Roux, A. Tordesillas, X. Yang, ZY Yin, Z. You, M. Zeghal, J. Zhao. Report on Recent Trends in Granular Mechanics. Granular Materials Committee, Engineering Mechanics Institute. New Report Series: Recent Trends in Mechanics - The National Academies of Sciences Engineering and Medicine. (2015), http://sites.nationalacademies.org/PGA/biso/IUTAM/PGA_069657. ACLN
  • ‘‘Numerical model based on SPH method to simulate Friction Stir Welding’’, A. Timesli, H. Zahrouni, B. Braikat, A. Moufki, H. Lahmam,10ème Congrès de Mécanique, Meknès 19-22 avril 2011 (Maroc). ACLN
  • C. Kirchlechner, D. Kiener, C. Motz, S. Labat, N. Vaxelaire, O. Perroud, J.-S. Micha, O. Ulrich, O. Thomas, G. Dehm & J. Keckes , Dislocation storage in single slip-oriented Cu micro-tensile samples: new insights via X-ray microdiffraction, Volume 91, Issue 7-9, 2011,Special Issue: Nano-Mechanical Testing in Materials Research and Development, pages 1256-1264 (2011) ACLN
  • E Niţu, M Iordache, L Marincei, I Charpentier, G Le Coz, G Ferron, I Ungureanu, FE-modeling of cold rolling by in-feed method of circular grooves, Strojniški vestnik-Journal of Mechanical Engineering 57 (9) (2011), 667-673 ACLN
  • M.S. RECHDAOUI, L. AZRAR, E.M. DAYA, S. BELOUETTAR. Mathematical modeling of subharmonic and superharmonic resonances of piezoelectric sandwich beams. Revue de Mécanique Appliquée et Théorique. 2, 1 (2009) 3-14. ACLN
  • A. HAZOTTE – “Transformations et contraintes de cohérence dans les superalliages et les intermétalliques de base TiAl“, Matériaux & Techniques 97 Hors Série (2009) 23–31 ACLN
  • B. HADDAG, T. BALAN, F. ABED-MERAIM, Prise en compte des trajets de déformation dans la simulation de la mise en forme des tôles métalliques, Sciences, Technologies et Développement, Revue Nationale Algérie (2008) 13 pp. ACLN
  • D. Zhemchuzhnikova, M. Lebyodkin, T. Lebedkina, R. Kaibyshev, The Portevin–Le Chatelier Effect and Kinematics of Deformation Bands in an Al-Mg-Sc Alloy: Effect of Grain Size, Thermec2016, Intern. Conf. on Processing & Manufacturing of Advanced Materials, May 29 - June 3, 2016, Graz, Autriche. INV
  • T. Grosdidier, M. Yahiaoui, D. Entemeyer, A.Tazibt, Modifying Metallic Surfaces by a Clean Supercritical High Pressure Cryogenic Nitrogen Jet (HPCryoN2Jet), Invited speaker, Symposium 5 : Thin Films and Surface Engineering, 9th Pacific Rim International Conference on Advanced Materials and Processing, Kyoto, Japan, 01 - 05 August 2016 INV
  • T. Grosdidier, Quantitative microstructure and texture characterization of severely plastically deformed surfaces and consolidated powders, The 4th International Conference on Advances in Materials & Materials Processing - ICAMMP-IV, IIT Kharagpur, 5-7 November, 2016 INV
  • T. Grosdidier, Y. Samih, M. Novelli, P. Bocher, T. Czerwiec, C. Dong, Nanocrystallization of metallic surfaces by duplex treatments involving severe shot peening, pulsed electron beam and nitriding, 54th National Metallurgists'day, 70th Annual Technical Meeting, NMD ATM2016, IIT Kanpur, India, 11-14 November, 2016 INV
  • M. Lebyodkin, T. Lebedkina, Avalanche phenomena in crystal plasticity, Intern. Workshop   "Avalanches and Rupture Phenomena", Centre Inria Nancy - Grand Est, 3-4 février 2015 INV
  • L.S. Toth, C.F. Gu, Y. Zhang, W. Skrotzki, T. Ungar, M. Hoffman, The transition in the behavior of polycrystals between coarse grained to ultra-fine-grained structures due to severe plastic deformation, ICMCSF, Lille, France, 2015, plenary lecture. INV
  • S. BERVEILLER, Y. ELHACHI, B. MALARD, J. WRIGHT, 3DXRD microscopy applied to study stress-induced martensitic transformation over one hundred individual grains in a shape memory alloy polycrystal, International Conference on Mechanics of materials (ICM12), Karlsruhe, Allemagne, 2015, Keynote lecture INV
  • S. BERBENNI V. TAUPIN, C. FRESSENGEAS, L. CAPOLUNGO. A Fast Fourier Transform-based approach for Generalized disclination mechanics within a couple stress theory,  Advanced Seminar: « Generalized Continua as Models for Materials with Multi-scale Effects or under Multi-field Actions » Magdeburg, Germany, September 21-25, 2015 (Invited Keynote Lecture). INV
  • Haile Yan, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Crystallography of martensitic transformation of Ni-Mn based alloys and its impact on martensitic variant selection, Phase transitions in magnetic materials: from fundamentals to applications,  Mexico, 2015, Invited lecture. INV
  • Bouvier S, Carvalho-Resende T, Balan T, Abed-Meraim F. Modelling the effect of microstructure evolution on the macroscopic behavior of single phase and dual phase steels: Application to sheet forming process. Plasticity’15, International Symposium on Plasticity and its Current Applications, Montego Bay (Jamaica), 4-9 January 2015, pp. 62–64, invited lecture. INV
  • Abed-Meraim F, Peerlings RHJ, Geers MGD. Comparison of bifurcation analysis and maximum force criteria in the prediction of necking in stretched metal sheets. XIII International Conference on Computational Plasticity, Fundamentals and Applications – COMPLAS XIII, Barcelona (Spain), 1-3 September 2015, CD-ROM 12 pp., invited lecture. INV
  • M. POTIER-FERRY, Linear and nonlinear homogenization. Séminaire Shandong Agricultural University, Taian, Chine, 17 avril 2015. INV
  • M. GOUNE, F. DANOIX, X. SAUVAGE, D. HUIN, S. ALLAIN, L. GERMAIN, New insights into alloying elements interaction with interfaces by coupling advanced experimental techniques and modelling, TMS 2015 , Orlando-USA, 15-19 Mars 2015, Invited Lecture INV
  • M. Lebyodkin, T. Lebedkina, D. Zhemchuzhnikova, R. Kaibyshev, Influence of grain refinement and nanosized precipitates on avalanche-like deformation processes in  Al-Mg alloys, EMN Spain Meeting 2015, Sept 1-4, St-Sebastian, Spain. INV
  • T. Grosdidier, Y. Samih, T. Czerwiec, C. Dong , Nanocrystallization of Metallic Surfaces by Duplex Treatments Involving Severe Shot Peening, Pulsed Electron Beam and Nitriding, Invited Talk in symposium 4G "Trends on Severe Plastic Deformation", XXIV International Materials Congress, Cancun, Mexico, 16-20 August, 2015 INV
  • C. Schuman, S. Wang, J.S. Lecomte, Y. Zhang, M.J. Philippe, X. Zhao and C. Esling, Determination of deformation mechanisms of a commercially pure titanium alloy (T40) by SEM FOR various deformation MODES, Plasticity 2014. INV
  • H. MANSOURJ. GUYONN. GEYB. BEAUSIR, M.A. CRIMP, S. CHALAL, N. MALOUFI. SACP Collection on the GEMINI Type electron column for Accurate Electron Channeling Contrast Imaging, EBSD Symposium Bordeaux, France, 2014, invited lecture INV
  • M.A. Lebyodkin, I.V. Shashkov, T.A. Lebedkina, K. Máthis, P. Dobroň, F. Chmelík, Multiscale correlations in the intermittent plastic flow: statistical and multifractal analysis of acoustic emission, Intern. Conf. ISPMA13, Sept. 2014, Prague, Czech Republic, Keynote Lecture. INV
  • Laszlo S. Toth, Chengfan Gu, Recent developments in grain refinement modeling during severe plastic deformation, 2014 TMS Annual Meeting & Exhibition, Ultrafine Grained Materials VIII, Febr. 16-20, 2014, San Diego, USA, invited lecture. INV
  • Abed-Meraim F. Modélisation des instabilités plastiques : application à la prédiction de la ductilité et formabilité des matériaux. 9 ièmes Journées de Mécanique, (JM’09), Alger (Algérie), 8-9 Avril 2014 (Conférence Plénière). INV
  • T.A. Lebedkina, N.P. Kobelev, M.A. Lebyodkin,   Onset of the Portevin-Le Chatelier effect: role of synchronization of dislocations, Thermec2013, Intern. Conf. on Processing & Manufacturing of Advanced Materials, Dec. 2-6, 2013, Las Vegas. INV
  • A. Roth, K.E.K. Amouzou, M.A. Lebyodkin, T. Richeton, T.A. Lebedkina and J.S. Lecomte, Three-stage character of strain hardening of α-Ti in tension conditions,  Thermec2013, Intern. Conf. on Processing & Manufacturing of Advanced Materials, Dec. 2-6, 2013, Las Vegas. INV
  • Laszlo S. Toth, Chengfan Gu, Y. Estrin, C.H.J. Davis, R. Lapovok, Grain refinement modelling in large plastic deformation, The 19th International Symposium on Plasticity & Its Current Applications: Analytical, Computational, and Expermiental Inelasticity in Deformable Solids, January 3-8, 2013, Nassau, Bahamas, keynote lecture INV
  • S. BERBENNI, F. WAGNER, N. ALLAIN-BONASSO. On the roles of grain size dispersion and microscale Hall-Petch Relation on the plastic behaviour of polycrystalline metals, International Symposium on « Strength of Fine Grained Materials - 60 years of Hall-Petch », SANJO Conference Hall, The University of Tokyo, July 16-18, 2013, Tokyo, Japon (invited lecture). INV
  • S. BERBENNI. A homogenization Mori-Tanaka scheme for elastic- viscoplastic heterogeneous materials based on “Translated Fields” (TF): applications to linear and non linear two-phase composites. ICACM, US-France Workshop, 22-24 May 2013, Aussois, France, 2013 (invited lecture). INV
  • S. BERBENNI, F. WAGNER, N. ALLAIN-BONASSO. Coupled  roles of grain size and crystallographic orientation distributions on the plastic behavior of IF steels: modeling and experimental approaches. Keynote Lecture. Int. Symp. on Plasticity “PLASTICITY 2013” (Mini Symposium on Microstructure-based Models of Plastic Deformation), Nassau, The Bahamas, January 3-8, 2013 (invited keynote lecture) INV
  • Liang Zuo, Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Extensions of electron diffraction based techniques in crystallographic characterization, ReXGG'05, Sydney, Australia, 2013, plenary lecture. INV
  • Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Crystallographic study on Ni-Mn-Ga martensite by electron backscatter diffraction (EBSD), THERMEC’2013, Las Vegas, USA, 2013.
    INV
  • S. BERBENNIB. PALIWAL, M. CHERKAOUI, Continuum Modelling of Shear-Coupled Grain Boundary Migration. Trilateral Seminar on Generalized Media as Models for Materials, September 26-28, 2012, Lutherstadt, Germany (invited lecture). INV
  • LI Zongbin, ZHAO Xiang, ZHANG Yudong, ESLING Claude, ZUO Liang, Microstructural tailoring during solid-state transformation by EPM, EPM'2012, Beijing, China, 2012, keynote lecture. INV
  • F.Mohri, N. Damil, M.Potier-FerryTorsion Approximation effect on non linear behaviour of thin-walled elements, paper 36, 11th Int Conf on Comp Structures Tech, Civil-Comp Press, 09/2012. Dubrovnik, Croatia. INV
  • M.A. Lebyodkin, N.P. Kobelev,Y. Bougherira, D. Entemeyer, C. Fressengeas, T.A. Lebedkina, I.V. Shashkov, Invariance d’échelles associée à l’instabilité plastique et à l’écoulement homogène, Journée "Vieillissement statique et dynamique des alliages", Paris, 19 avril 2011 INV
  • A. HAZOTTE – “Solid phase transformation mechanisms in TiAl-based intermetallics alloys “ – Keynote Lecture, EUROMAT 2011, Montpellier, 12-15 septembre 2011 INV
  • Thomas, S., Hurt, C., Das, N., Ashmawy, A.K., Daouadji, A., and Sukumaran, B., “Discrete Element Modelling methodology incorporating various aspects of particle morphology,” Invited presentation at the Particle Based Methods, 2011. INV
  • A.D. Rollett, R. Lebensohn, F. Wagner, D. Field, R.M. Suter, S.F. Li, C.M. Hefferan, J. Lind,  X. Tan,  R. Pokharel, “Problem Solving with Viscoplasticity”,  TMS 2011, San Diego Feb. 2011 INV
  • A.D. Rollett, S. Lee, M. Groeber, R. Lebensohn, J. Li, G. Rohrer, F. Wagner and D.P. Field, “Measurements of the effect of microstructure on deformation in polycrystals”, 17th International Symposium on Plasticity - current applications, Puerto Vallarta, Mexique, 3-8 Janv. 2011. INV
  • S. BERVEILLER, R. PESCI, D. BOUSCAUD, E. PATOOR, Internal stress analysis at different lengthscales in multiphased materials: X-rays, neutrons and synchrotron radiations, Plasticity’11, Puerto Vallerta, Mexique, 2011 INV
  • Xiang Zhao, Yudong Zhang, Claude Esling, Daoyong Cong, Liang Zuo, Orientation relationship, texture and microstructure in electronmagnetic processed materials (EPM), ICMS'2011, Shanghai & Xi’an, China, 2011, plenary lecture. INV
  • Yudong Zhang, Shiying Wang, Claude Esling, Xiang Zhao and Liang Zuo, Determination of crystallographic elements (dislocation and surface plane) from automated TEM orientation determination, ICOTOM'16, Bombay, India, 2011.
    INV
  • Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, EBSD-based crystallographic study on Ni-Mn-Ga alloy with incommensurate 7M structure, ICOTOM'16, Bombay, India, 2011.
    INV
  • Yudong Zhang, Zongbin Li, Claude Esling, Xiang Zhao, Liang Zuo, Calculation methods to determine crystallographic elements based on electron diffraction orientation measurements by SEM/EBSD or TEM, THERMEC’2011, Quebec City, Canada, 2011.
    INV
  • Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Application of EBSD to the crystallographic investigation in Ni-Mn-Ga alloys, THERMEC’2011, Quebec City, Canada, 2011. INV
  • Abed-Meraim F, Trinh VD, Combescure A. Assumed-strain solid–shell formulation for the six-node finite element SHB6: evaluation on nonlinear benchmark problems. International Congress Design and Modeling of Mechanical Systems CMSM’2011, Sousse (Tunisia), 30 May - 1 June 2011, CD-ROM 8 pp., invited lecture. INV
  • L.S. Toth, B. Beausir, D. Orlov, R. Lapovok, A. Haldar, Analysis of texture and R value variations in asymmetric rolling of IF steel, IFSTEEL-2010 Conference, Jamshedpur, India, Febr. 15-17, 2010, keynote lecture. INV
  • A. HAZOTTE – “Relaxation of Misfit Stresses During Solid-Solid Phase Transformations of Intermetallics Alloys“ - French-Chinese Symposium on Advanced Materials towards Energy, Transport and Environment, 24-26 May, 2010, Shenyang, China. INV
  • L. GERMAIN, P. BLAINEAU, N. GEY, M. HUMBERT, “Calculation of high temperature parent orientation maps application to low carbon steels,” presented at the Advanced methods in Electron Backscattered Diffraction, 5-6 mai, St Etienne, France, 2010. INV
  • S. Berbenni, N. Nicaise, F. Wagner, M. Berveiller, X. Lemoine. E-VPSC model with “Translated Fields”: an application to the coupled effects of grain size distributions and crystallographic textures on the plastic behaviour of IF steels. EPIM Worshop (Elastic-Plastic International Meeting), 18-20 August 2010 INV
  • T. Grosdidier, B. Bolle, J.D. Puerta Velasquez, J.X. Zou, J.J. Fundenberger, N. Allain-Bonasso, P. Chevrier, A. Tidu Microstructure, texture and residual stresses induced by surface thermo-mechanical treatments, the 7th International Forum on Advanced Material Science and Technology, 26-28 June 2010, The Dalian University of Technology, Dalian, China INV
  • T. Grosdidier, X.D. Zhang, J.A. Wu, N. Allain-Bonasso, K.M. Zhang, J.X. Zou, Y. Qin, X.N. Li, S.Z. Hao, C. Dong, "Crater Eruption Induced by High Current Pulsed Electron Beam (HCPEB) Treatment", PRICM 7 (7th Pacific Rim International Conference on Advanced Materials and Processing) Cairns, Australia, 02-06 August 2010. INV
  • T. Grosdidier, B. Bolle, J.D. Puerta Velasquez, J.X. Zou, J.J. Fundenberger, N. Allain-Bonasso, P. Chevrier, A. Tidu. "Microstructure, texture and residual stresses induced by surface thermo-mechanical treatments", Keynote lecture at the 7th International Forum on Advanced Material Science and Technology (IFAMST-7), Dalian, China, 26-28 June 2010. INV
  • L. Bao, C. Schuman, J.S. Lecomte, M.J. Philippe, X. Zhao, L. Zuo, C. Esling, Study of deformation mechanisms of Titanium during rolling and channel die compression", Microstructure characterization, analysis and design Symposium (in honor of Brent Adams), MS&T meeting Pittsburgh, Oct. 2009, Speaker : C. ESLING. INV
  • P. FORQUIN, B. Erzar, Dynamic fragmentation process in concrete under impact and spalling tests. IUTAM Symposium on Dynamic Fracture and Fragmentation, 2009, Austin, Texas, USA, invited lecture. INV
  • C. Fressengeas, A.J. Beaudoin, D. Entemeyer, T. Lebedkina, M. Lebyodkin, V. Taupin, Intermittency of plasticity and dislocation transport, 2nd International Workshop: Correlation Microstructure-Properties and Multiscale Modelling of Plasticity, Fuenteheridos, Huelva (Spain), June 17-21, 2009, Universidad de Sevilla, A. Dominguez-Rodriguez, D. Gomez-Garcia, A. Munoz-Bernabé Eds, 95-99, 2009, invited lecture. INV
  • F. MERAGHNI, Modelling and Experimental Identification of Fatigue Damage for Short Glass Fibre Reinforced Polyamide (PA6-FG). Invited Lecture, (CAM2009), Biskra, 16-19 novembre 2009. INV
  • A. Molinari, Multiscale Modelling of Dynamic Damage, conference invitée à Georgia Tech, Atlanta, 2009. INV
  • A. Molinari, The role of micro-inertia in plastic flow localization in metals subjected to high strain rates, Symposium to honor J.R. Klepaczko, mai 2009, Metz, keynote lecture. INV
  • A. Molinari, C. Czarnota, N. Jacques, S. Mercier, Modelling of dynamic damage in metallic materials, Workshop 2009 on theoretical and experimental approaches for dynamic industrial processes, Madrid, June 2009, general invited conference. INV
  • E. Patoor, An overview of different approaches to model SMAs and SMA structures, 8th European Symposium on Martensitic Transformation, Prague, Czech Republic, September 7 - 11, 2009, keynote lecture. INV
  • E. Patoor, Comportement des alliages à mémoire de forme, Colloque National Mécamat, Aussois, 25-30 janvier, 2009, invited lecture. INV
  • E. Patoor, Modélisation du comportement mécanique des matériaux : Prise en compte des changements de phases, Colloque National Mécamat, Aussois, 25-30 janvier, 2009, invited lecture. INV
  • F. Prima, B. Dailey, P. Laheurte, A. Eberhardt, T. Gloriant, P. Vermaut, R. Portier, E PATOOR Ti-based alloys with tuneable mechanical properties for biomedical applications, International Conference on Processing and Manufacturing of Advanced Materials, August 25-29, 2009, Technical University-Berlin, Germany, THERMEC 2009. INV
  • T. Grosdidier, J.X. Zou, C. Dong, Modifications of Surface Microstructure and Properties of FeAl and other intermetallics, 5th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, 21-24 Sept. 2009, Charles University, Prague, CZECH REPUBLIC. INV
  • A. HAZOTTE – “Transformations et contraintes de coherence dans les superalliages et les intermétalliques de base TiAl“, Colloque MECAMAT, 25-30 janvier 2009, Aussois (F) INV
  • Y. Zhang, C. Esling, X. Zhao, L. Zuo, Application of a high magnetic field during thermo-treatment of metallic materials as a potential means for microstructure modification, THERMEC'2009,  Berlin, Germany, 2009. INV
  • Yudong Zhang, C. Esling, X. Zhao, L. Zuo, Microstructure control by magnetic field during thermo-treatment of metallic materials – a review, International Conference on Magneto Science, Nijmegen, Netherlands, 2009.
    INV
  • Yudong Zhang, C. Esling, J. Muller, X. Zhang, L. Zuo, Calculation methods to determine crystallographic elements: interface plane, surfaces plane and twinning elements, based on electron diffraction orientation measurements by SEM and TEM, ITAP-3, Göttingen, Germany, 2009, keynote lecture.
    INV
  • C. Esling, D. Y. Cong, Y. D. Zhang, J-M Raulot, X. Zhao, L. Zuo, Phase transformations in ferromagnetic shape memory alloys, French-German (de facto European) meeting for Texture and Anisotropy, Orsay, France, 2009. INV
  • C. Esling, Y. D. Zhang, J. M. Raulot, X. Zhao, L. Zuo, Crystallographic study and ab initio simulation of Ni-Mn-Ga ferromagnetic shape memory alloys, THERMEC'2009, Berlin, Germany, 2009. INV
  • F. Abed-Meraim, A. Combescure. Locking-free formulation for the stabilized enhanced strain solid-shell element (SHB8PS): geometrically non-linear applications, 6th International Conference on Computation of Shell and Spatial Structures IASS-IACM 2008, Ithaca (U.S.A.), 28-31 Mai 2008, pp. 7-10, invited lecture. INV
  • B. Beausir, S. Suwas, L. S. Toth, K. W. Neale, J.J. Fundenberger, Evolution of deformation textures under dynamic recrystallization in hexagonal metals during large strain simple shear, 15th Int. Conf. Texture of Materials, Icotom15, 1-6 June 2008, Pittsburgh, Pennsylvania, USA, invited lecture. INV
  • E. Béchet, Recent developpments of the X-FEM applied to piezoelectric fracture mechanics, Institut für Angewandte Analysis und Numerische Simulation, Universität Stuttgart January 31st, 2008, Germany, invited lecture. INV
  • S. Berbenni, P. Franciosi, Grain size dependency of the overall stiffness of poly-crystals through a "graded" RSL-TFA-HML modeling. 14th Int. Symp. on Plasticity "PLASTICITY 2008", Kailua/Kona, Hawaii, January 3-8, 2008, Keynote lecture. INV
  • S. Berbenni, M. Berveiller, Modelling of periodic dislocation microstructures constrained by spherical grain boundaries. International Symposium Computational Mechanics of Polycrystals, Bad Honnef, Germany, February 25-26, 2008, invited lecture. INV
  • A. Combescure, F. Abed-Meraim, B. Maurel. Full SPH modeling of the dynamic failure of shells interacting with a fluid, 6th International Conference on Computation of Shell and Spatial Structures IASS-IACM 2008, Ithaca (U.S.A.), 28-31 Mai 2008, pp. 23-26, invited lecture. INV
  • A. Daouadji, P-Y. Hicher, F. Darve, Modelling undrained behaviour of granular materials at low and high stresses, 8th International Workshop on Bifurcations and Degradations in Geomaterials, Lake Louise, Alberta, Canada, 2008. INV
  • P. FORQUIN, B. Erzar, J.R. Klepaczko, Experimental Approach and Modeling of the Dynamic Tensile Behavior of a Micro-concrete. ICACM 2008, Rocamadour, France. INV
  • F. MERAGHNI, Structural Polymers Reinforced Composites for Transportation Applications towards Lightweight Automotive Structures subjected to Fatigue and Impact Loading. Invited Lecture, Indo-French Seminar on Automotive Manufacturing Technologies. 5-6 September 2008, Chennai, India, invited lecture. INV
  • A. Molinari, G. Ravichandran, Shock structures in metals and composite materials, Second conference organized by the International Center for Applied Computational Mechanics, Rocamadour, France, 2008, keynote lecture. INV
  • E. Patoor, An overview of different approaches to model SMAs and SMA structures, Workshop, Modelling of SMAs and SMA Actuated Structure, ESF EUROCORES programme Smart Structural Systems Technologies (S3T), Prague, Czech Republic, May 4-7, 2008, keynote lecture. INV
  • L.S. Toth, Modeling of deformation and texture in severe plastic deformation with flow lines, NanoSPD4, Goslar, 18-22 August, 2008, keynote lecture. INV
  • V.D. Trinh, F. Abed-Meraim, A. Combescure. New prismatic solid-shell element: assumed strain formulation and evaluation on benchmark problems, 6th International Conference on Computation of Shell and Spatial Structures IASS-IACM 2008, Ithaca (U.S.A.), 28-31 Mai 2008, pp. 11-14, invited lecture. INV
  • F. WAGNER, Annealing textures and anisotropy in low carbon steels, Février 2008, Jamshedpur, MATS. INV
  • A. Daouadji, P. - Y. Hicher, F. Darve, Modelling undrained behaviour of granular materials at low and high stresses, 8th International Workshop on Bifurcations and Degradations in Geomaterials, Lake Louise, Alberta, Canada, 2008 INV
  • D. Y. Cong, Y. D. Zhang, C. Esling, Y. D. Wang, X. Zhao, L. Zuo, Determination of crystal structure and crystallographic characteristics in Ni-Mn-Ga ferromagnetic shape memory alloys, ICAMP-5, Harbin, China, 2008. INV
  • C. Esling, D. Y. Cong, Y. D. Zhang, J. M. Raulot, H. Faroun, X. Zhao, L. Zuo, Crystallographic study of Ni-Mn-Ga ferromagnetic shape memory alloys, International Conference on Materials Informatics and DFT, Oran, Algeria, 2008. INV
  • T. Watanabe, A. Tsurekawa, Y. D. Zhang, X. Zhao, L. Zuo, C. Esling, New approach to texturing and grain boundary engineering by magnetic field application, ICOTOM'15, Pittsburgurgh, USA, 2008. INV
  • C. Esling, Y. D. Zhang, G. Vincent, Improvement of cracking resistance of a hot dip zinc coating by asymmetrical skin pass and grain boundary engineering, ISCS'08, Jamshedpur, India, 2008. INV
  • S. BERBENNI, H.SABAR. A Time-Incremental Eshelby-Based Homogenization Scheme for Viscoelastic Heterogeneous Materials (Chapter 12). In: "Micromechanics and Nanomechanics of Composite Solids" (Editors: Shaker A. Meguid, George J. Weng), ISBN 978-3-319-52793-2. Springer, pp. 347-369, 2017 OS
  • S. BERBENNI, V. TAUPIN, C. FRESSENGEAS, L. CAPOLUNGO. A Fast Fourier Transform-based approach for Generalized disclination mechanics within a couple stress theory. Chapter 3, in “Generalized Continua as Models for Classical and Advanced Materials” (eds: H. Altenbach, S. Forest), Advances Structured Materials Series, Springer, 2016. OS
  • G. D. SEIDEL, G. CHATZIGEORGIOU, X. REN, D. C. LAGOUDAS,  Multiscale Modeling of Multifunctinal Fuzzy Fibers based on Multi-Walled Carbon Nanotubes. In: Modeling of Carbon Nanotubes, Graphene and their Composites. Edited by K. I. Tserpes, N. P. Silvestre, Springer Series in Materials Science Volume 188, pp. 135-176. OS
  • D. BOUSCAUD, R. PESCI, S. BERVEILLER, E. PATOOR, La microdiffraction Kossel - Détermination des déformations et contraintes à l’échelle du micromètre », Chapitre dans - EBSD : Analyse par diffraction des électrons rétrodiffusés - Applications et techniques couplées, EDP Sciences, 2015 OS
  • S. BERBENNI, B. PALIWAL, M. CHERKAOUI. Continuum Modelling of Shear-Coupled Grain Boundary Migration. Chapter 3, in “Generalized Continua as Models for Materials with Multiscale Effects or under Multi-Field Actions” (eds: H. Altenbach, S. Forest, A. Krivtsov), Advances Structured Materials Series Springer (ISBN 978-3-642-36393-1), pp. 41-64, 2013. OS
  • V. Taupin, L. Capolungo, C. Fressengeas, A. Das, M. Upadhyay, Chapter : A theory of disclination and dislocation fields for grain boundary plasticity, Generalized Continua as Models for Materials, H. Altenbach et al. (eds.), Advanced Structural Materials, Springer- Verlag Berlin Heidelberg 2013.  OS
  • Daouadji, A.; Jrad, M.; Prunier, F.; Sibille, L.; Nicot, F.; Laouafa, F.; Darve, F.; Divergence Instability and Diffuse Failure in Granular Media, Procedia IUTAM, 3,105-130, 2012,  Elsevier. OS
  • B. MALARD, S. BERVEILLER, E. PATOOR , “Intérêt de la diffraction de neutrons et de rayons X du rayonnement synchrotron dans l’analyse des matériaux à mémoire de forme“, Chapitre 2 dans Analyse des contraintes par diffraction des neutrons et du rayonnement synchrotron - Application aux matériaux texturés », Eds. A.Lodini et T.Baudin EDP Sciences, 2012 OS
  • Dislocation mediated continuum plasticity: case studies on modeling scale dependence, scale invariance and directionality of sharp yield point, C. Fressengeas, A. Acharya and A.J. Beaudoin, in Computational Methods for Microstructure-Property Relationships, Eds. S. Ghosh and D. Dimiduk, Springer-Science, 277-309, DOI 10.1007/978-1-4419-0643-4 8, 2011. OS
  • S. BERBENNI, Internal length scale effects on the local and overall behaviors of polycrystals. Chapter 5, in “Mechanics of Generalized Media” (eds: H. Altenbach, G. A. Maugin, V. Erofeev), Advances Structured Materials Series, Springer (ISBN: 978-3-642-19218-0), pp. 99-136, 2011. OS
  • Y. ZHANG and C. ESLING, Chapter15. “Effect of a magnetic field on phase transformations in steels” in “Phase transformation in steels”, Editors, Prof. E. Pereloma and Prof. D. Edmonds, Woodhead Publishing Limited, Cambridge, 2011 OS
  • P. Forquin, W Riedel, J. Weerheijm. Chapter 10: Dynamic Testing Devices, in Tensile strength of concrete, published by Woodhead Publishing, 2011 OS
  • J. Weerheijm, P. Forquin. Chapter 11: Response mechanisms of concrete under impulsive tensile loading, in Tensile strength of concrete, published by Woodhead Publishing, 2011 OS
  • Daouadji, A.; Hicher, P.Y.; Chang, CS; Jrad, M.; Algali, H., Instability in Loose Sand: Experimental Results and Numerical Simulations with a Microstructural Model, Bifurcations, Instabilities and Degradations in Geomaterials, 13-31, 2011, Springer. OS
  • G. ROBIN, Méthodes acoustiques auto-calibrées en émission-réception pour l'étude et le suivi des propriétés non linéaires des matériaux et l'imagerie, Thèse de doctorat de l'Université François Rabelais de Tours, 2011. OS
  • N. CORDERO, S. FOREST, E.P. BUSSO, S. BERBENNI, M. CHERKAOUI, Grain size effects in generalised continuum crystal plasticity. In: " Plasticity of crystalline materials : from dislocations to continuum" (eds: I.R. Ionescu, S. Bouvier, O. Cazanu, P. Franciosi),  ISTE-Wiley 2011, pp. 101-121. OS
  • P. Forquin, F. Hild, A probabilistic damage model of the dynamic fragmentation process in brittle materials. Advances in Applied Mech. Giessen & Are feds. 44, pp. 1-72. Academic Press, San Diego, CA, 2010. OS
  • Mécanique des Champs de Dislocations, C. Fressengeas, Hermès Science Publishing (London), ISBN : 978-2-7462-2983-9, 2010. OS
  • P. Forquin, B. Erzar. Experimental Approach and Modeling of the Dynamic Tensile Behavior of a Micro-concrete, pp. 147-178, in Materials under Extreme Loadings: Application to Penetration and Impact, edited by G. Voyiadjis, I.R. Ionescu, E. Buzaud. Wiley, John & Sons, Incorporated, ISBN: 1848211848, 2010 OS
  • A. Guedri, B. Merzoug, Moe Khaleel and A. Zeghloul, Reliability analysis of low alloy ferritic piping materials, in: Damage and Fracture Mechanics Failure Analysis of Engineering Materials and Structures, Springer Netherlands, (2009) 33-42. OS
  • M. A. Lebyodkin, T. A. Lebedkina, A. Jacques, Multifractal analysis of unstable plastic flow, Nova Science Publishers, NY, 2009, 86 pages. OS
  • Irene J. Beyerlein, Lászlό S. Toth, Texture evolution in equal channel angular extrusion, Bulk Nanostructured Materials, Eds. M. Zehetbauer, Y. Zue, WILEY-VCH Verlag Gmbh, (2009), pp. 387-421. OS
  • M. A. Lebyodkin, T. A. Lebedkina, A. Jacques, Multifractal analysis of the unstable plastic flow, Progress in Materials Science Research, Nova Science Publishers, Ed. A.C. Venetti, NY, 2008, pp 9-61. OS
  • C.ESLING and H.J. BUNGE, Texture et Anisotropie des Matériaux, M 605, Nouvelle édition révisée et augmentée, Techniques de l’Ingénieur, Paris (2011) OV
  • L. IGHIL AMEUR and M. HATTAB, Crack initiation and propagation of clays under indirect tensile strength test by bending related to the initial suction, Proceedings of Advances in Laboratory Testing and Modelling of Soils and Shales (ATMSS) International Workshop, Villars-sur-Ollon - Switzerland, 18-20 January, 2017, Springer Series in Geomechanics and Geoengineering, pp. 173-180. DOI: 10.1007/978-3-319-52773-4_19 ACTI
  • I. A. MBAREK, A. RUSINEK, E. PETIT, G. SUTTER, G. LIST- The Ductile Fracture of Armor Steel Targets Subjected to Ballistic Impact- 13th Congress of Mechanics - April 11-14, 2017- Meknes, MARROCO  ACTI
  • C. Schneider-Maunoury, P. Acquier, L. Weiss, D. Boisselier and P. Laheurte, Additive manufacturing of functionnally graded materials by the CLAD process, ICWAM, Metz, May 17-19 (2017) ACTI
  • I.A.MBAREK, A.RUSINEK, G.LIST, G.SUTTER - Experimental Investigations on the Dynamic Force Measurements During Impact and Perforation using Armor Steel Targets- International Conference on Experimental Mechanics (ICEM17) - Rhodes GREECE 2016. ACTI
  • R. MATADI, A. RUSINEK, I.A. MBAREK, P. GERARD - Temperature and Strain rate Effect on the Mechanical behavior of PMMA and PMMA based acrylic tri-bloc Copolymer under Compression: Characterization and Modelling - The 10th Workshop of Dynamic Behaviour of Materials and Its Applications in Industrial Processes - Poznan POLAND 2016. ACTI
  • A. BEDIA, F.Z. BEDIA, M. AILLERIE, N. MALOUFI, Influence of Precursor Solution Volume on the Optical Properties of Spray Deposited ZnO Films, AIP Conference Proceedings 1758 (2016) 030044 ACTI
  • I. A. MBAREK, A. RUSINEK, G. SUTTER, G. LIST -  Assessment of the Dynamic Force Measurement During Ballistic Impact and Perforation using Armor Steel Targets : Numerical & Experimental Insights - EMI International Conference on ENGINEERING MECHANICS - October 25-27, 2016, Metz, FRANCE ACTI
  • M. Novelli, J-J. Fundenberger, P. Bocher, T. Grosdidier, Hardening of austenitic stainless steels by ultrasonic shot peening at cryogenic temperature, International Workshop on Giant Straining Process for Advanced Materials, 2016, Fukuoka, Japon ACTI
  • M. Novelli, J-J. Fundenberger, L. Mohrain, N. Nathalie, P. Bocher, T. Grosdidier, Analysis of the deformation induced martensite generated by SMAT ultrasonic shot peening at cryogenic temperature in the 304L stainless steel, 9th Pacific Rim International Conference, 2016, Kyoto, Japon ACTI
  • T.CAMALET, M.KAROŃ, R.BERNIER, A.RUSINEK, M.ADAMIAK, effect of severe plastic deformation or shock impact on 6061 aluminum behavior under dynamic compression, 10th Workshop Dynamic Behavior of Materials and its Applications in Industrial Processes, Poland, 24-26 august, 2016. ACTI
  • R. MATADI BOUMBIMBA, A. RUSINEK, R. BERNIER, M. COULIBALY, Temperature and strain rate effect on the mechanical behavior of PMMA and PMMA based acrylic tri-bloc copolymer under compression : characterization and modeling, 10th Workshop Dynamic Behaviour of Materials and its Applications in Industrial Processes, Poland, 24-26 august, 2016. ACTI
  • I.A.MBAREK, G. LIST, G.SUTTER, A. RUSINEK, R. BERNIER, Experimental investigations on the force measurements during impact and perforation using armor steel targets, Conference: International Conference on Experimental Mechanics (ICEM17), Rhodes GREECE, 3-7 july, 2016. ACTI
  • F. XU, M. POTIER-FERRY. Numerical aspects of pattern formation modeling of film-substrate systems. International Workshop on Pattern Formation in Soft Materials (IWSM 2015), Tianjin, P.R. China, June 1-4, 2015. ACTI
  • S. BAHI, G. List, G. Sutter, Analysis of adhered contacts and boundary conditions of the secondary shear zone, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015. ACTI
  • M. Fischer, P. Mille,J. Krier, H. Pelletier, P. Laheurte ; Finite Element Analysis and Characterization of a New Low Modulus Titanium Alloy Used in Two THA Designs ; 21 St congress of the european society of biomechanics, 2015, Prague, Republique Tchèque. ACTI
  • S. MSOLLI, H. BADREDDINE, C. LABERGERE, M. MARTINY, G. ROBIN, M. JRAD, K. SAANOUNI, F. CHOQUART, Sheet metal forming for AA1050-O: experimental investigation and FEM modeling, 9th European Solid Mechanics Conference, Madrid, SPAIN, 6-10 July, 2015. ACTI
  • G. MICHEL, V. JEANCLAUDE, and S. STRATULAT, Better careers for transnational European students ? - a case study for French-German diploma alumni, ICEUTE’2015 (Sixth International Conference on EUropean Transnational Education), Burgos , Spain, 15-17 June, 2015, A. Herrero, B. Baruque, J. Sedano, H. Quintian, and E. Corchado, editors, Springer 2015, volume 369 of Advances in Intelligent Systems and Computing, pp. 517–524.  ACTI
  • F. XU, M. POTIER-FERRY. A numerical framework for instability pattern formation modeling of film/substrate systems. 3rd ECCOMAS Young Investigators Conference (YIC) & 6th GACM Colloquium on Computational Mechanics, Aachen, Germany, July 20-23, 2015. ACTI
  • A. ARLAZAROV, M. GOUNE, A. HAZOTTE, O. BOUAZIZ, F. KEGEL, Mechanism of ultra-fine microstructure formation during ART-annealing of   a Medium-Mn steel,, PTM 2015, Int. Conf. on Solid-Solid Phase Transformations in Inorganic Materials, 28/6-3/7/2015 , Whistler (Canada) ACTI
  • J. GUYON, A. HAZOTTE, E. BOUZY, Estimation des gradients thermiques présents au niveau des cous lors du frittage d'alliages TiAl par Spark Plasma Sintering, Colloque STPMF 2015 : Science et Technologie des Poudres et Matériaux Frittés, April 08-10 2015, Nancy, France, Actes dans Récents Progrès en Génie des Procédés 107 (2015) ACTI
  • Z. EL OMARI, H. MANSOUR, M. BEN SAADA, N. GEY, N. MALOUFI, A. HAZOTTE, X. ILTIS, Etude des liens entre la microstructure et les mécanismes d'endommagement par fluage du dioxyde d'uranium, Colloque STPMF 2015 : Science et Technologie des Poudres et Matériaux Frittés, 08-10/4/2015, Nancy (F), Actes dans Récents Progrès en Génie des Procédés 107 (2015) ACTI
  • S. MSOLLI, M. MARTINY, M. CARDOSO, L. MOREIRA, S. MERCIER, A. MOLINARI, FEM modeling of the sheet metal forming for 304L stainless steel based on additive tangent Mori-Tanaka homogenization scheme, 9th European Solid Mechanics Conference, Madrid, SPAIN, 6-10 July, 2015. ACTI
  • M. Fischer, D. Joguet, L. Peltier, P. Laheurte ; In situ titanium alloy elaborated by selective laser melting of Ti and Nb mixed13th World Conference on Titanium,2015, Sand Diego, Californie ACTI
  • M. Fischer, L. Peltier, D. Boisselier, P. Acquier, P. Laheurte : Characterization of direct laser deposited low modulus Ti-26Nb alloy on Ti-6Al-4V for biomedical applications, International congress on applications of laser and electro-optics, 2015, Atlanta, USA. ACTI
  • D. CHATZIATHANASIOU, Y. CHEMISKY, F. MERAGHNIG. CHATZIGEORGIOUE. PATOORPhenomenological model for phase transformation characteristics of textured shape memory alloys, TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), ed. I. Karaman, R. Arróyave, E. Masad, pp. 211-222. ACTI
  • G. CHATZIGEORGIOU, M. HOSSAIN, F. MERAGHNI, P. STEINMANN, Micromechanics modeling of magneto-sensitive polymeric materials during curing, 20th International Conference on Composite Materials, Copenhagen, Denmark 19-24 July 2015, paper 150701-1233. ACTI
  • H. MANSOUR, M.A. CRIMP, N. GEY, N. MALOUFI, Characterization of a sub-grain boundary using Accurate Electron Channeling Contrast Imaging, Microscopy and Microanalysis, Vol. 21, Supplement S3 (2015) pp 601-602, Oral presentation, Presidential Scholar Award, M&M Meeting 2015, Portland, OR USA ACTI
  • L. Weiss, J. Zollinger, P. Sallamand, E. Cicala and E. FleuryMicrostructure and property of titanium heterogeneous laser welding, Proceedings of the 13th World Conference on Titanium, San Diego, USA, August 16-20, 2015 ACTI
  • M. BEN HAJ SLAMA, S. ALLAIN, N. GEY, L. GERMAIN, K. ZHU, Ultrafast Granularization of Lath-like Bainite in FeNiC Alloys During Isothermal Holding, International Conference on Solid-Solid Phase Transformation in Inorganic Materials Canada (PTM 2015) ACTI
  • B. Yang, Y. Zhang, Z. Li, G. Qin, C. Esling, X. Zhao, L. Zuo. EBSD characterization of crystallographic orientations and twin interfaces of modulated martensite in epitaxial NiMnGa thin film. in: Skrotzki W, Oertel CG, (Eds.). 17th International Conference on Textures of Materials, vol. 82. 2015. ACTI
  • G. List, G. Sutter, S. Bahi (Poster), Friction of titanium alloy at high sliding velocity: study at different scale, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015. ACTI
  • A. D’ACUNTO, G.LE COZ, A. MOUFKI, D. DUDZINSKI, Dry milling of nanostructured, workpiece surface integrity, XIIth International Conference on High speed machining, (2015), Nanjing, China. ACTI
  • N. Sabkhi, M. Nouari, A. Moufki, Modeling of the gear hobbing process: Predictions of cutting forces and cutting-edge effect, Advances in Materials and Processing Technologies conference, (2015), Spain. ACTI
  • Wang P, Chalal H, Abed-Meraim F. Efficient solid–shell finite elements for quasi-static and dynamic analyses and their application to sheet metal forming simulation. 18th International Esaform Conference on Material Forming, Graz (Austria), 15-17 April 2015, pp. 344–349. ACTI
  • Akpama HK, Ben Bettaieb M, Abed-Meraim F. A comparative study of forming limit diagrams predicted by two different plasticity theories involving vertex effects. 18th International Esaform Conference on Material Forming, Graz (Austria), 15-17 April 2015, pp. 21–26. ACTI
  • Chalal H, Abed-Meraim F. Numerical predictions of ductile fracture limits in deep drawing processes. 6 th International Conference on Mechanics and Materials in Design, M2D’15, Ponta Delgada (Portugal), 26-30 July, 2015, CD-ROM 10 pp. ACTI
  • Wang P, Chalal H, Abed-Meraim F. Quasi-static and dynamic simulation of sheet metal forming processes using linear and quadratic solid–shell elements. 6th International Conference on Mechanics and Materials in Design, M2D’15, Ponta Delgada (Portugal), 26-30 July, 2015, CD-ROM 10 pp. ACTI
  • Akpama HK, Ben Bettaieb M, Abed-Meraim F. Influence of the yield surface curvature on the forming limit diagrams predicted by a crystal plasticity theory. 9th International Conference on Advanced Computational Engineering, ACE-X 2015, Munich (Germany), 29 June – 02 July, 2015, CD-ROM 6 pp. ACTI
  • Ben Bettaieb M, Abed-Meraim F. Effect of kinematic hardening on localized necking in substrate-supported metal layers. 9th International Conference on Advanced Computational Engineering, ACE-X 2015, Munich (Germany), 29 June – 02 July, 2015, CD-ROM 6 pp. ACTI
  • M. EL KANDAOU, F. SCANDELLA, L. GERMAIN, P. BRANDY, D. DEBREYER, C. GÉRARDIN, E. FLEURY, Microstructure and mechanical properties of Ti-6Al-4V laser welds for airplane floor manufacturing application, Proceedings of the 13th World Titanium Conference, San Diego, USA, August 16-20, 2015 ACTI
  • J. WEN, N. ALLAIN, E. FLEURY, The effect of hydrogen-deformation interactions on the recrystallization of β-21S titanium alloys,  Proceedings of the 13th World Titanium Conference, San Diego, USA, August 16-20, 2015 ACTI
  • G. CHASSAING, N. GEY, A.T TIDU, L. FAURE, J. MERIAUX, How the sub−surface microstructure of a Ti6Al4V tribopair evolves due to dry friction at high sliding velocity, Proceeding of The 13th World Conference on Titanium August 16−20, 2015 San Diego, California -CD ACTI
  • M. SALIB, J. TEIXEIRA, L. GERMAIN, N. GEY , E. AEBY−GAUTIER, Influence of precipitation at beta/beta grain boundaries, after plastic deformation, on microtexture in a beta metastable titanium alloy, Proceeding of The 13th World Conference on Titanium, August 16−20, 2015 San Diego, California ACTI
  • C. DEBREUX, F.DANOIX, D. BLAVETTE, D. GIBOUIN, F. CHEVALIER, F. CUVILLY, T. SOURMAIL, N. GEY, Coupled EBSD, NanoSIMS and FIB techniques for Atom Probe Tomography specimen preparation, International Conference on Solid-Solid Phase Transformation in Inorganic Materials Canada (PTM 2015) ACTI
  • E. BOUCARD, N. GEY, M. BEN HAJ SLAMA, L.GERMAIN, S. COBO, D. BARBIER, Deformation substructure of austenite evaluated by crystallographic reconstruction and its influence on microstructure inheritance in low carbon steels, International Conference on Solid-Solid Phase Transformation in Inorganic Materials Canada (PTM 2015) ACTI
  • J. Fadonougbo, J.Y. Suh, S.Y Han, C.H. Shim, G.H. Kim, M.H. Kim, E. FLEURY, Y.W. Cho, Hydrogen-induced Decomposition of Cu-Zr Binary Amorphous Metallic Alloys, ISMANAM (22nd International Symposium on Metastable, Amorphous and Nanostructured Materials), held in Paris, July 12-17, 2015 ACTI
  • Hu Heng, Potier-Ferry, M., Belouettar, S., Damil, N., Multi-scale modeling and simulation on wrinkling phenomena, International Workshop on Pattern Formation in Soft Materials (IWSM 2015), Tianjin, P.R. China, June 1-4, 2015. ACTI
  • Potier-Ferry, Michel, Abdelkhalek, S., Kpogan, K., Mathieu, N., Zahrouni, H., Wrinkling phenomena generated by thin sheet fabrication processes, International Workshop on Pattern Formation in Soft Materials (IWSM 2015), Tianjin, P.R. China, June 1-4, 2015. ACTI
  • T. Grosdidier,Y. Samih, M. Novelli, /u>Modification of metallic surfaces by duplex treatments involving SPD,  6th International Conference on Mechanics and Materials in Design (M2D), P Delgada, Portugal, 26-30 juillet 2015 , Actes de M2D2015, pp. 315-316 ACTI
  • F. XU, S. BELOUETTAR, M. POTIER-FERRY. Pattern formation finite element modeling for thin films on soft substrates. Proceedings of WCCM XI - ECCM V - ECFD VI 2014 Congress, Barcelona, Spain, July 20-25, 2014, 12 pages. ACTI
  • N. Das, B. Sukumaran, C. Cary, A. Daouadji, Characterizing and Incorporating Particle Morphology in Discrete Element Modeling, IS-Cambridge 2014. ACTI
  • N. Das, B. Sukumaran, C. Cary, A. Daouadji, Suitability of the Superpave Gyratory Compactor for the Assessment of Compaction Characteristics of Unbound Materials, IS-Cambridge 2014 ACTI
  • A. Daouadji, M. Jrad, F. Darve, Instability of granular materials during proportional strain tests, IWBDG, Hong Kong, 2014 ACTI
  • Kpeky F, Boudaoud H, Chalal H, Abed-Meraim F, Daya EM. “Vibration modeling of sandwich structures using solid-shell finite elements.” 11th World Congress on Computational Mechanics (WCCM XI) & 5th European Conference on Computational Mechanics (ECCM V), Barcelona, Spain, July 20-25, 2014. ACTI
  • Microstructure and mechanical properties of Al-3Fe alloy processed by equal channel angular extrusion, Yu Fuxiao, Liu Fang, Zhao Dazhi, Laszlo S. Toth, 6th International Conference on Nanomaterials by Severe Plastic Deformation IOP Publishing IOP Conf. Series: Materials Science and Engineering 63 (2014) 012079. ACTI
  • Contribution of shear deformation to grain refinement and densification of iron powder consolidated by high pressure torsion, Y J Zhao, R Massion, T Grosdidier, L S Toth, 6th International Conference on Nanomaterials by Severe Plastic Deformation IOP Publishing IOP Conf. Series: Materials Science and Engineering 63 (2014) 012032. ACTI
  • Microstructure and mechanical properties of continuous equal channel angular pressed Titanium, Dyakonov G S, Gu C F, Toth L S, Valiev R Z, Semenova I P, 6th International Conference on Nanomaterials by Severe Plastic Deformation IOP Publishing IOP Conf. Series: Materials Science and Engineering 63 (2014) 012067. ACTI
  • A. Ayad, N. Rouag and F. Wagner  “Grain growth simulation in an IF steel - Effect of grain boundary mobility”,ICOTOM 17, Dresden (Germany) August 2014,
    appeared in
    IOP Conf. Series: Materials Science and Engineering 82 (2015) ACTI
  • T.A. Lebedkina, N.P. Kobelev, M.A. Lebyodkin,   Onset of the Portevin-Le Chatelier effect: role of synchronization of dislocations, Materials Science Forum 783-786 (2014) 198-203. ACTI
  • Y. Samih, M. Novelli, T. Thiriet, B. Bolle, N. Allain, J.-J. Fundenberger, G. Marcos, T. Czerwiec, T. GrosdidierPlastic deformation to enhance plasma-assisted nitriding: On surface contamination induced by Surface Mechanical Attrition Treatment, 6th Int. Conf. Nanomater. Sev. Plast. Deform. Nanospd6 Metz (2014) 012020. ACTI
  • T. Hammad, M. Hattab, J-M. Fleureau. Microstructural change identification in the Mix-Kaolin/Montmorillonite Clays at the Ultimate State. International Symposium on Geomechanics from Micro to Macro. Soga et al. (Eds), 2015 Taylor and Francis Group. September 1 – 3 , (2014). Cambridge, UK. pp 1279-1283. ACTI
  • R.W. Wheeler, D.J. Hartl, Y. Chemisky, D.C. Lagoudas, Characterization and Modeling of Thermo-Mechanical Fatigue in Equiatomic NiTi Actuators, ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems ACTI
  • B. ESMAEILLOU, J. FITOUSSI, F. MERAGHNI, A. TCHARKHTCHI. Micro-mechanisms of fatigue in short glass fiber reinforced polyamide 66: A multi-scale experimental analysis, 16th Eur. Conf. Compos. Mater. ECCM-16, 22-26 June, 2014, Seville–Spain.  ACTI
  • Numerical investigation of cut-edge effect using Gurson-Tvergaard-Needleman mode, By: Lemoine, Xavier; Balan, Tudor; Habraken, Anne-Marie,Edited by: Ishikawa, T; Mori, KI, Conference: 11th International Conference on Technology of Plasticity (ICTP) Location: Nagoya, JAPAN Date: OCT 19-24, 201, 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014  Book Series: Procedia Engineering  Volume: 81  Pages: 724-729  Published: 2014 ACTI
  • I.V. Shashkov, M.A. Lebyodkin (Lebedkin), V. S. Gornakov, Statistical and multifractal properties of Barkhausen jumps in exchange-coupled  antiferromagnetic/ferromagnetic bilayers, Intern. Conf EASTMAG 2013, Trends in MAGnetism, 15-21 Sept. 2013, Vladivostok, Russia, Solid State Phenomena 215 (2014) 35-40. ACTI
  • A. Daouadji, M. Jrad, Diffuse Instability during proportional Strain tests, EMI - ASCE Conference, Northwestern University, 2013 ACTI
  • F. XU, S. BELOUETTAR, M. POTIER-FERRY, H. HU. A finite element model for wrinkling analysis of thin films on compliant substrates. 12th U.S. National Congress on Computational Mechanics (USNCCM12), Raleigh, North Carolina, U.S.A., July 22-25, 2013. ACTI
  • F. XU, S. BELOUETTAR, M. POTIER-FERRY, H. HU. Surface wrinkling of a stiff thin film on a functionally graded substrate. International Conference on Science and Technology of Heterogeneous Materials and Structures (ICSTHMS 2013), Wuhan, P.R. China, October 11-13, 2013. ACTI
  • Z. Leng, A. Alankar, D. Field, N. Allain-Bonasso and F. Wagner   “Dislocation density based crystal plasticity finite element model of polycrystal with grain boundary effect”, 2nd World Congress on Integrated Computational Materials, Procedings, Ed. Mei Li et al, Wiley, p.271-278, (2013) ACTI
  • A. Daouadji, M. Jrad, B. Sukumaran, F. Darve, The role of the density on the diffuse instability of cohesionless granular materials,US-France Workshop (Aussois), 2013 ACTI
  • A. Daouadji, M. Jrad, Undrained and drained instabilities in granular materials, International Conference on Science and Technology of Heterogeneous Materials and Structures, Wuhan University, 2013. ACTI
  • T. ARA, C. BOUBY, T. BEN ZINEB, S. BERVEILLER, E. PATOOR, Development of a 2-D interfacial dynamic model for detwinning in HTSMAS, Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, USA, 16-18 septembre 2013, Volume 2, 2013, Article number V002T02A003 ACTI
  • E.J. Petit, N. Becker, Y. Grosbety, J. Gilgert and Z. Azari, Mechanical resistance and fatigue toughness of spot welded and hot-dip galvanized AISI410 martensite steel sheets for structural applications for the automotive industry,
    Proceed. 9th. Int. Conf on zinc and Zinc alloy coated steel sheet, 2d Asia-Pacific galvanizing conference ; sept 23-27, 2013, Beijing. (Galvatech 2013)  pp. 227-232. ACTI
  • Liang Zuo, Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Extensions of electron diffraction based techniques in crystallographic characterization, 5th International Conference on Recrystallization & Grain Growth (ReXGG), Mater. Sci. Forum 753 (2013) 11-16. ACTI
  • M Soltani, B Asgarian and F Mohri  Finite element method for stability analysis of tapered thin-walled beams under lateral loads. World Cong on Advances in Structural Eng and Mechs (ASEM 2013), 09/2013, Jeju, Korea ACTI
  • Gurson-type Elastic-Plastic Damage Model Based on Strain-Rate Plastic Potential, By: Balan, Tudor; Cazacu, Oana Edited by: Yoon, JW; Stoughton, TB; Rolfe, B; et al., Conference: 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET) Location: Melbourne, AUSTRALIA Date: JAN 06-10, 2014, Sponsor(s): AutoForm; ESI; Korea Inst Mat Sci; Ford; JSTAMP; Space Solut; LG Elect; Deakin Univ; Univ Adelaide; Swinburne UnivTechno, NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS  Book Series: AIP Conference Proceedings  Volume: 1567  Pages: 464-467  Published: 2013 ACTI
  • F. XU, H. HU, S. BELOUETTAR, M. POTIER-FERRY. Analysis of reduced coupling and prolonged coupling approach via Arlequin method on instability pattern. Proceedings of the 6th International Conference on Coupled Instabilities in Metal Structures (CIMS 2012), Glasgow, UK, December 3-5, 2012, ed. J. Loughlan, pp. 87-94. ACTI
  • J. FAVRE, Y. KOIZUMI, A. CHIBA, D. FABREGUE, E. MAIRE, Recrystallization of L-605 cobalt superalloy during hot-working process, TMS Annual Meeting  PP. 257 - 264 (2012) ACTI
  • J. FAVRE, A. CHIBA, Y. KOIZUMI, D. FABREGUE, E. MAIRE, Dynamic recrystallization of biomedical Co-Cr-W-Ni (L-605) alloy, Materials Science Forum  706-709  PP. 472 - 477 (2012) ACTI
  • P. DUFILIE, P. VENTURA, F. HECHT, "COM parameters for Thick Metal and Partially Buried Electrodes Extracted from a Mixed FEM/BEM Numerical Model", 2012 IEEE Ultrasonics Symposium. ACTI
  • Dmitry Orlov, Rimma Lapovok, Laszlo S. Toth, Ilana B. Timokhina, Peter D. Hodgson, Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel, Debashish Bhattacharjee, Arunansu Haldar, THERMEC2011, Aug. 1-5, (2011), Quebec, Canada, , Materials Science Forum, 706-709 (2012) 2788-2793. ACTI
  • J. LACAZE, J. EIKEN, A. HAZOTTE, “Resampling technique applied to statistics of microsegregation characterization“, 13ème Conf. Int. “Modeling of Casting, Welding and Advanced Solidification Processes“, 17-22 juin 2012, Schladming (A), IOP Conf. Series: Materials Science and Engineering 33 (2012) 012062 ACTI
  • B. GOUBAULT DE BRUGIÈRE, F. MARION, M. FENDLER, V. MANDRILLON, A. HAZOTTE, M. VOLPERT, H. RIBOT - “Electro-mechanical studies of micro tube insertion into Al-Cu pads for 10μm pitch interconnection technology and 3D applications“, Materials for Advanced Metallization (MAM2012), Grenoble 11-14 mars 2012, à paraître dans Microelectronic Engineering ACTI
  • P. Forquin, L. Sallier, S. Bakowski. A Testing Technique to Characterise the Shear Behaviour of Concrete at High Strain-Rates, SEM2012, Costa Mesa, USA ACTI
  • L. Sallier, P. Forquin. Influence of the Confined Behaviour and the Tensile Strength of Concrete Slabs Under Projectile-Impact, SEM2012, Costa Mesa, USA ACTI
  • L. Sallier, P. Forquin. On the use of Hillerborg regularization method to model the softening behaviour of concrete subjected to dynamic tensile loading, DYMAT2012, Freiburg, Germany. ACTI
  • F.Mohri, N. Damil, M. Potier-Ferry: Torsion Approximation effect on non linear behaviour of thin-walled elements, paper 36, Proceedings of the Eleventh International Conf on Comp Structures Tech, Civil-Comp Press, 2012. ACTI
  • Kumpel, C., Panko, M., McGarvey, K., Hurt, C., Melici, A., Rossi, S., Yurick,C., Daouadji, A., and Sukumaran, B. (2012), “Compaction characteristics of the subbase material using the Superpave Gyratory Compactor,” Proceedings of the TSO Workshop, 2012. ACTI
  • A. Ayad, N. Allain-Bonasso, N. Rouag and F. Wagner, “Grain Orientation Spread values in IF steels after plastic deformation and recrystallization” ICOTOM 16, Déc. 2011, paru dans Materials Science Forum Vol.702-703, p. 269-272, (2012) ACTI
  • Dmitry Orlov, Rimma Lapovok, Laszlo S. Toth, Ilana B. Timokhina, Peter D. Hodgson, Debashish Bhattacharjee, Arunansu Haldar, Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel, THERMEC2011, Aug. 1-5, 2011, Quebec, Canada, Materials Science Forum, 706-709 (2012) 2788-2793. ACTI
  • Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel, A. Fillon, X. Sauvage, A. Pougis, O. Bouaziz, D. Barbier, R. Arruffat, L.S. Toth, UFG Symposium TMS2012, published in J. Mat. Sci., 47 (2012) 7939-7945. ACTI
  • P.A. JUAN, L. CAPOLUNGO, S. BERBENNI, An elasto-plastic micromechanical method for twin driven plasticity.TMS 2012, March 11-15, 2012, Orlando, USA; publié dans: Magnesium Technology, pp. 83-86, 2012 ACTI
  • S. BERBENNI, B. PALIWAL, M. CHERKAOUI, Micromechanics-based modeling of shear-coupled migration in bicrystals.  European Solids Mechanics Conference EUROMECH – ESMC 12, July 9-13, 2012, Graz, Austria  ACTI
  • E.J. Petit, Y. Grosbety, S. Aden-Ali, L. Schmitt, J. Gilgert and Z. Azari,   Fatigue toughness of galvanized high strength steels for structural applications for the automotive industry,
    Proceed. 23rd. Int. Galvanizing Conf., 11-13 june, 2012, Paris. (Intergalva 2012) ACTI
  • Zongbin Li, Yudong Zhang, Claude Esling, Hao Yang, Jijie Wang, Changshu He, Xiang Zhao, Liang Zuo. "Application of EBSD to the crystallographic investigation on Ni-Mn-Ga alloys, THERMEC, Mater. Sci. Forum 706-709 (2012) 1879-1884. ACTI
  • Yudong Zhang, Zongbin Li, Claude Esling, Xiang Zhao, Liang Zuo, Calculation methods to determine crystallographic elements based on electron diffraction orientation measurements by SEM/EBSD or TEM, Mater. Sci. Forum 706-709 (2012) 2674-2679. ACTI
  • Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, EBSD-based crystallographic study on a Ni-Mn-Ga alloy with incommensurate 7M structure, ICOTOM16, Mater. Sci. Forum 702-703 (2012) 530-535. ACTI
  • Yudong Zhang, Shiying Wang, Claude Esling, Xiang Zhao, Liang Zuo, Determination of crystallographic elements (dislocation and surface plane) from automated TEM orientation determination, ICOTOM16, Mater. Sci. Forum 702-703 (2012) 866-871. ACTI
  • C. Schuman, L. Bao, J. S. Lecomte, M. J. Philippe, Y. D. Zhang, X. Zhao, L. Zuo, J. M. Raulot, C. Esling, New Model for Twin-variant Selection in Hexagonal Alloys, ICOTOM16, Mater. Sci. Forum, 702-703 (2012) 229-232.
    ACTI
  • K Attipou, H Hu, F Mohri, M Potier-Ferry, S Belouettar: Analysis of buckling and wrinkling of plate under thermo-mechanical loading using a Fourier-related multi-scale approach. CIMS 2012, Glasgow, 2012 ACTI
  • Mansouri LZ, Chalal H, Abed-Meraim F, Balan T. Plastic instability based on bifurcation analysis: Effect of hardening and Gurson damage parameters on strain localization. 15th International Esaform Conference on Material Forming, Erlangen (Germany), 14-16 March 2012, pp. 35–40. ACTI
  • Chalal H, Salahouelhadj A, Abed-Meraim F. Evaluation of a new solid–shell finite element on the simulation of sheet metal forming processes. 14thMetal Forming Conference, Krakow (Poland), 16-19 September 2012, pp. 315–318. ACTI
  • G. LE COZ,  A. DEVILLEZ, D. DUDZINSKI, S. AUGER, Dry milling of an aerospace aluminium alloy, 9th International Conference on High speed machining (2012) San Sebastian, Spain ACTI
  • M.F. ARIF, F. MERAGHNI, N. SAINTIER, J. FITOUSSI, G. ROBERT. Experimental Fatigue Damage Evaluation of Short Glass Fiber Reinforced Polyamide Composites. ESCM8 8th Eur. Solid Mechanics Conference, 9-13 July 2012, Graz – Austria. ACTI
  • Analysis of limit strains in metallic sheetsdos Santos Freitas, Maria Carolina; Moreira, Luciano Pessanha; Makkouk, Rabih; Ferron,Gerard,REM-REVISTA ESCOLA DE MINAS  Volume: 65  Issue: 4  Pages: 523-530  Published: OCT-DEC 2012 ACTI
  • A. MOUFKI, G. LE COZ, D. DUDZINSKI, An analytical thermomechanical modelling of peripheral milling process using a predictive machining theory, 13th CIRP Conference On Modeling Of Machining Operation, Sintra, Portugal, 12-13 May 2011. ACTI
  • R. OUAHAB, R. PESCI, S. BERVEILLER, E. PATOOR, Influence of temperature on stress distribution in bainitic steels - Application to 16MND5-A508 pressure vessel steel, 8th European Conference on Residual Stresses (ECRS8), Riva del Garda (Italy), Materials Science Forum 681, 2011, 243-248. ACTI
  • G. ROBIN, F. VANDER MEULEN, J. FORTINEAU, G. FEUILLARD, Non linear parametric imaging using an ultrasonic focused transducer, Ultrasonics Symposium (IUS), Orlando, FL, U.S.A., 18-21 October, 2011, ed IEEE, pp. 1080-1083. ACTI
  • B. GOUBAULT DE BRUGIERE, F. MARION, M. FENDLER, V. MANDRILLON, A. HAZOTTE, M. VOLPERT, H. RIBOT, “A 10µm pitch interconnections technology using micro tubes insertion into AlCu for 3D applications“,61th Electronic Components and Technology Conference (ECTC 2011), 31 mai-3 juin 2011, Lake Buena Vista (USA) ACTI
  • K. Douvon, M. Jrad, E.M. Daya and A. Daouadji, A 3D discret lattice spring model for quasi static and dynamic response in granular media, DEMEASS IV conference, Design, Modelling, and Experiments of Advanced Structures and Systems, 27-30 March 2011, Urspelt, Luxembourg ACTI
  • ‘‘Numerical model based on SPH method to simulate Friction Stir Welding’’, A. Timesli, H. Zahrouni, B. Braikat, A. Moufki, H. Lahmam,10ème Congrès de Mécanique, Meknès 19-22 avril 2011 (Maroc). ACTI
  • A. D'ACUNTO, C. LESCALIER, A. MOUFKI, D. DUDZINSKI, Cutting forces prediction in plunge milling with a modeling taking into account of the active cutting edge local contribution, 9th International Conference on Advanced Manufacturing Systems and Technology , Mali Losinj, Croatia, June 16-17, 2011. ACTI
  • A.ARLAZAROV, O.BOUAZIZ, M.GOUNÉ, A. HAZOTTE, F. KEGEL - “Effect of intercritical annealing time on microstructure and mechanical behavior of advanced medium Mn steels“, Thermec 2011, 1-5 août 2011, Québec (CA), Mater. Sci. Forum 706-709 (2012) 2693-2698 ACTI
  • P. Forquin, L. Sallier, B. Erzar and J. Mazars. Modeling of the softening behaviour of concrete subjected to dynamic tensile loading in spalling tests. CFRAC 2011, Barcelone, France ACTI
  • P. Forquin., R. Cheriguène. A rocking spalling test to characterize the crack velocity in concrete. SEM 2011, Uncasville, Connecticut, USA ACTI
  • F. Pierron, P. Forquin. Ultra high speed full-field strain measurements on spalling tests on concrete materials. SEM 2011, Uncasville, Connecticut, USA ACTI
  • Das, N., Thomas, S., Kopmann, J., Donovan, C., Hurt, C., Daouadji, A., Ashmawy, A.K., and Sukumaran, B., “Using Surface Texture Measurements and Other Characteristics of Particle Morphology in Discrete Element Modeling, ASCE Engineering Mechanics Conference, Boston, MA, 2011. ACTI
  • Das, N., Thomas, S., Kopmann, J., Donovan, C., Hurt, C., Daouadji, A., Ashmawy, A.K., and Sukumaran, B., “Modeling granular particle shape using Discrete Elements,” Proceedings of the GeoFrontiers Conference, Dallas, TX, 2011. ACTI
  • A. Daouadji, C. Dano and W. Hu, Instability and crushing of granular materials, 6th International Conference on Dam Engineering, DAM11, Lisbon, Portugal, 2011. ACTI
  • N. Gey, P. Bocher, E. Uta, M. Humbert, J. Gilgert, How texture and microtexture influence dwell fatigue lifetime in forged IMI834 Titanium alloys, International Conference Titanium-2011 China - Proceedings to be published ACTI
  • W. Elmay, T. Gloriant, F. Prima, B. Bolle, N. Gey, E.Patoor, P. Laheurte, A thermomechanical treatment to improve superelasticity and low modulus of Ti-Nb alloys for biomedical applications, International Conference Titanium-2011 China - Proceedings to be published ACTI
  • C. Buirette; J Huez; N. Gey; E. Andrieu, G.Khelifati, Study of microstructural factors governing damage processes in the Ti-6Al-4V Titanium alloy after Charpy tests, International Conference Titanium-2011 China - Proceedings to be published ACTI
  • Jing Bai, Jean-Marc Raulot, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Effects of Co addition on crystal structure, thermal stability and magnetic properties of Ni-Mn-Ga ferromagnetic shape memory alloys from first-principles calculations,THERMEC2011, Mater. Sci. Forum  706-709 (2012) 1990-1995. ACTI
  • Y. SAMIH, B. BOLLE, N. ALAIN-BONASSO, S. Z. HAO, C. DONG, T. GROSDIDIER, Microstructure modifications induced by Pulsed Electron Beam in Steels, Adv. Mater. Sci. Technol.  - Dalian (2011) 1315–1318. ACTI
  • Salahouelhadj A, Abed-Meraim F, Balan T, Chalal H. On the implementation of the continuum shell finite element SHB8PS and application to sheet forming simulation. 14th International Esaform Conference on Material Forming, Belfast (Ireland), 27-29 Avril 2011, pp. 1203–1208. ACTI
  • Mansouri LZ, Chalal H, Abed-Meraim F, Balan T. Prediction of strain localization during sheet metal forming using bifurcation analysis and Gurson-type damage. COMPLAS’XI, Barcelona (Spain), 7-9 Septembre 2011, CD-ROM 6 pp. ACTI
  • Salahouelhadj A, Chalal H, Abed-Meraim F, Balan T. Elastic-plastic analyses using the solid-shell finite element SHB8PS and evaluation on sheet forming applications. COMPLAS’XI, Barcelona (Spain), 7-9 Septembre 2011, CD-ROM 6 pp. ACTI
  • G. GU, R. PESCI, E. BECKER, L. LANGLOIS, R. BIGOT, Microstructure evolution and material flow of steel in semi-solid forming process, Steel Res. Inter., Special Edition (2011) 768-773 ACTI
  • Flow Curve Determination at Large Plastic Strain Levels: Limitations of the Membrane Theory in the Analysis of the Hydraulic Bulge TestLemoine, X.; Iancu, A.; Ferron, G. Edited by: Menary, G Conference: 14th International Conference on Material Forming Esaform Location: Queens Univ, Belfast, NORTH IRELAND Date: APR 27-29, 2011, 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS  Book Series: AIP Conference Proceedings  Volume: 1353  Pages: 1411-1416  Published: 2011 ACTI
  • Flow Curve Determination at Large Plastic Strain Levels to Accurately Constitutive Equations of AHSS in Forming Simulation, By: Lemoine, X.; Sriram, S.; Kergen, R.,  Edited by: Menary, Conference: 14th International Conference on Material Forming Esaform Location: Queens Univ, Belfast, NORTH IRELAND Date: APR 27-29, 201, 14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS  Book Series: AIP Conference Proceedings  Volume: 1353  Pages: 1417-1422  Published: 2011 ACTI
  • G. ALTMEYER, F. ABED-MERAIM, T. BALAN. Investigation of some localization criteria and their relevance to the prediction of forming limit diagrams. 13th Metalforming Conference, 19-22 September (Japan) 2010. ACTI
  • T. CARVALHO RESENDE, T. BALAN, F. ABED-MERAIM, S. BOUVIER, SS. SABLIN. Application of a dislocation based model for aluminum alloys on Cross Die stamping tests. Numiform Conference, 13-17 June (Pohang - Korea) 2010. ACTI
  • M. Hattab, T. Hammad, J-M. Fleureau, Compressibility behaviour of soft clay sediments, GeoShanghai 2010. Shanghai 3-5 June 2010. ACTI
  • V. Taupin, S. Berbenni, C. Fressengeas and O. Bouaziz, On Particle Size Effects: an Internal Length Mean Field Approach using Field Dislocation Mechanics, IVth European Conf. on Comput. Mechanics-ECCM IV, Solids, Structures and Coupled Problems in Engineering, ECCOMAS, Paris, May 16-21, 2010. ACTI
  • V.D. TRINH, F. ABED-MERAIM, A. COMBESCURE. Formulation of new quadratic solid-shell elements and their evaluation on popular benchmark problems. 9th WCCM Conference, 19-23 July (Sydney) 2010. ACTI
  • P. BLAINEAU, L. GERMAIN, M. HUMBERT, N. GEY, A new approach to calculate the gamma orientation maps in steels’, 3rd International Conference on Texture and Anisotropy of Polycrystals - ITAP-3, Septembre 2009, Göttingen, Germany, in Solid State Phenomena Vol. 160, 203-210 (2010). ACTI
  • G. ROBIN, F. VANDER MEULEN, N. WILKIE-CHANCELLIER, L. MARTINEZ, L. HAUMESSER, J. FORTINEAU, P. GRIESMAR, G. FEUILLARD, Monitoring of the nonlinear coefficient during silica gel formation using an ultrasonic self-calibrated method, Ultrasonics Symposium (IUS), 2010 IEEE, San Diego, U.S.A., 11-14 October, 2010, ed. IEEE, pp. 825-828. ACTI
  • W. Elmay, P. Laheurte, A. Eberhardt, B. Bolle, T. Gloriant, E. Patoor, F. Prima, D. Laille, P. Castany, M. Wary, Stability and elastic properties of beta Ti alloys for biomedical application designed with electronic parameters, 14th International Conference on Experimental Mechanics (ICEM 14), Poitiers, France, July 4-9, 2010, EPJ Web of Conferences 6, 29002 (2010), DOI : 10.1051/epjconf/20100629002. ACTI
  • A. MOUFKI, D. DUDZINSKI, G. LE COZ, An analytical thermomechanical modelling of helical tooth milling processes using a predictive cutting theory, 2nd International Conference CIRP on Process Machine Interactions, Vancouver, June 10-11, 2010. ACTI
  • On the role of short-range vs. long-range spatial correlations in dislocation patterning, J. Chevy, C. Fressengeas, M. Lebyodkin, P. Bastie and P. Duval, Fifth International Conference Multiscale Materials Modeling MMM2010, October 4-8, 2010, Freiburg, Germany ACTI
  • A. SANKARAN, E. BOUZY, M. BARNETT, A. HAZOTTE - “Grain boundary-dependent selection criteria for nucleation of gamma-massive grains in TiAl-based alloy“ – 7th Pacific Rim International Conference on Advanced Materials and Processing PRICM7, 1-5 august 2010, Cairns (Australia) - Materials Science Forum 654-656 (2010) 2338-2341. ACTI
  • B. GOUBAULT DE BRUGIERE, F. MARION, M. FENDLER, V. MANDRILLON, A. HAZOTTE, M. VOLPERT, H. RIBOT, “Micro tube insertion into indium, copper and other materials for 3D applications”, 60th Electronic Components and Technology Conference (ECTC 2010), 1-4 juin 2010, Las Vegas (USA) - Actes “Proceedings 60th ECTC”, Book Series: Electronic Components and Technology Conference, Pages: 1757-1762 ACTI
  • J. LACAZE, A. HAZOTTE, J. EIKEN - “Statistical characterization of microsegregation studied on Mg-Al phase field simulations“ – 8th Int. Conf. On Magnesium Alloys and their Applications (Magnesium 2009), 26-29 octobre 2009, Weimar (D) - éd. K.U. Kainer, DGM/Wiley-VCH (2010) pp. 398-404. ACTI
  • B. Piotrowski, T. Ben Zineb, D. Lagoudas, E. Patoor, Modeling of precipitation effects on the thermomechanical behaviour of NiTi SMA, Y. Chemisky, Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, Philadelphia, USA. ACTI
  • B. Piotrowski, E. Patoor, T. Ben Zineb, Experimental and numerical analysis of recovery stress in Ni47Ti44Nb9 shape memory alloy: Application to tightening,Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, Philadelphia, USA. ACTI
  • Y. Chemisky, A. Duval, B.Piotrowski, T. Ben Zineb, and E. Patoor, Numerical tool for Shape Memory Alloys structures simulations including twinning effects, Proceedings of ESOMAT 2009, published by EDP Sciences, 2010, DOI:10.1051/esomat/200908003 (on line 17/12/2010). ACTI
  • B. Piotrowski, T. Ben Zineb, E. Patoor, A. Eberhardt, Physic Procedia, Experimental and numerical analysis of recovery stress in Ni47Ti44Nb9 shape memory alloys: application to tightening, Proceeding of symposium S: Shape memory materials for smart systems III, EMRS, Strasbourg, 2010. ACTI
  • M. Bilasse, I. Charpentier, E. M. Daya, A generic approach for the solution of nonlinear residual equations: application to vibrations of viscoelastic structures, IV European Conference on Computational Mechanics, ECCM 2010, Paris. ACTI
  • El Khaldi, E.M. Daya, I. Charpentier, Optimal control with a complex nonlinear eigenvalue solver for viscoelastic law identification, IV European Conference on Computational Mechanics ECCM 2010, Paris. ACTI
  • K. Lampoh, E.M. Daya, I. Charpentier, Sensitivity analysis of solutions computed through the ANM: application to the geometrical nonlinear behaviour of a laminated glass beam, IV European conference on Computational Mechanics ECCM 2010, Paris. ACTI
  • Continuity constraints and spatial correlations on interfaces in crystal plasticity, B. Beausir, C. Fressengeas, N.P. Gurao, L.S. Toth and S. Suwas, IVth European Conference on Computational Mechanics-ECCM IV, Solids, Structures and Coupled Problems in Engineering, ECCOMAS, Paris, May 16-21, 2010. ACTI
  • J-C. HELL, M. DEHMAS, G. GEANDIER, N. GEY, S. ALLAIN, A. HAZOTTE, J.P. CHATEAU - “Influence of the austempering temperature on the microstructure and crystallography of a carbide-free bainitic steel“ - Solid-Solid Phase transformations in inorganic Materials – PTM 2010, 6-11 june 2010, Avignon (F). ACTI
  • N. Gey, P. Blaineau, L. Germain, M. Humbert, D. Barbier, A. Perlade ‘Restitution of the shapes and orientations of the prior austenitic grains from inherited alpha' orientation maps in steels’, International conference of Solid-to-Solid Phase Transformation in Inorganic Materials (PTM), June 6-11 2010, Palais des Papes, Avignon, France. (accepted for publication in Solid State Phenomena). ACTI
  • Grain Fragmentation in Equal Channel Angular Pressed Copper Gu CF, Toth LS, Beausir B, Williams T, Davies CHJ, Conference Information: 7th Pacific Rim International Conference on Advanced Materials and Processing, AUG 02-06, 2010 Cairns, AUSTRALIA ACTI
  • Grain Fragmentation in Equal Channel Angular Pressed Copper Gu CF, Toth LS, Beausir B, Williams T, Davies CHJ, Conference Information: 7th Pacific Rim International Conference on Advanced Materials and Processing, AUG 02-06, 2010 Cairns, AUSTRALIA Source: PRICM 7, PTS 1-3 Book Series: Materials Science Forum Volume: 654-656 Pages: 1570-1573 Part: Part 1-3 Published: 2010 ACTI
  • Structure and Mechanical Properties of Asymmetrically Rolled IF Steel Sheet, Orlov D, Lapovok R, Toth LS, Timokhina IB, Hodgson PD, Bhattacharjee D, Haldar A, Conference Information: 7th Pacific Rim International Conference on Advanced Materials and Processing, AUG 02-06, 2010 Cairns, AUSTRALIA Source: PRICM 7, PTS 1-3 Book Series: Materials Science Forum Volume: 654-656 Pages: 1255-1258. ACTI
  • Bai J, Raulot JM, Esling C, Zhao X, Zuo L Structure stability and magnetic properties of Ni2XGa (X = Mn, Fe, Co) Ferromagnetic Shape Memory Alloys by DFT approach TEXTURE AND ANISOTROPY OF POLYCRYSTALS III Book Series: Solid State Phenomena Series Volume: 160 Pages: 69-74 Published: 2010 ACTI
  • B. Erzar, P. Forquin, C. Pontiroli, E. Buzaud. Influence of aggregate size on the dynamic behaviour of concrete subjected to impact loading. ICEM14 2010, Poitiers, France ACTI
  • P. Forquin, Experimental approach and modelling of the mechanical behaviour of graphite fuel elements subjected to compression pulses. ICEM14 2010, Poitiers, France ACTI
  • X. Soldani, A. Muñoz-Sánchez, H. Miguélez, A. Molinari Numerical Modelling of Segmentation Phenomenon in Orthogonal cutting 2nd CIRP International Conference Process Machine Interactions Vancouver (Canadá), 10-11 June 2010 ACTI
  • T. Baudin, C. Esling, L. Kestens, T. Al-Samman, W. Skrotzki, Some major features in texture and anisotropy field, Adv. Eng. Mater. 10, 967-970, 2010. ACTI
  • Y. D. Zhang, C. Esling, X. Zhao, L. Zuo. Application of a High Magnetic Field during Thermo-Treatment of Metallic Materials as a Potential Means for Microstructure Modification, Materials Science Forum,Vol. 638 – 642, 202-207, 2010. ACTI
  • Y. Wu, C. S. He, Y. D. Zhang, X. Zhao, L. Zuo, C. Esling. Effects of High Magnetic Field Annealing on the Nucleation Sites for Recrystallized Nuclei with {111} < 112 > Orientation in Cold-rolled IF Steel Sheet, Materials Science Forum, 638-642, 824-828, 2010 ACTI
  • C. Esling, D. Y. Cong, J. Bai, Y. D. Zhang, J. M. Raulot, X. Zhao, L. Zuo. Structure and Phase Stability of NiMnGa Ferromagnetic Shape Memory Alloys by Experimental and ab-initio Techniques, Materials Science Forum, 638-642, 2040-2045, 2010. ACTI
  • C. Esling, Y. D. Zhang, J. Muller, X. Zhao, L. Zuo, Calculation methods to determine crystallographic elements: interface plane, surfaces plane and twinning elements, based on electron diffraction orientation measurements by SEM and TEM, Solid State Phenomena, 160, 11-16, 2010. ACTI
  • H. Bian, A. Daouadji, Y. Jia and I. Shahrour, Influence of soil saturation on the free field responds of liquefiable soils, Shanghai, China, 2010. ACTI
  • X. Li, Y. Fautrelle, Z. M. Ren, A. Gagnoud, Y. D. Zhang, C. Esling, Morphological instability of interface, cell and dendrite during directional solidification under strong magnetic field, ICCG16/ICVGE14, Beijing, China, 08-13, 2010, Journal of Crystal Growth, 318 (2011) 23-27.
    ACTI
  • S. Bahi, A. Moufki, M. Nouari, M. Elmansori, A. Molinari, Analysis of tribological parameters during machining, The 12th International ESAFORM Conference on Material Forming, University of Twente, Netherlands, 2009, 4 pages. ACTI
  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmitonnet, N. Legrand, P. Buessler, Coupled and uncoupled approaches for thin cold rolled strip buckling prediction, International ESAFORM Conference on Material Forming, April 27-29, 2009, Twente, Netherlands. ACTI
  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmitonnet, N. Legrand, P. Buessler, Modelling and Investigations of Strip Flatness including Buckling Phenomena during Strip Rolling, 5th European Rolling Conference, June 23-26, 2009, London, UK, ACTI
  • G. Altmeyer, F. Abed-Meraim, T. Balan. Formability prediction of thin metal sheets using various localization criteria, 12th International Esaform Conference on Material Forming, University of Twente (The Netherlands), 27-29 Avril 2009, CD-ROM, 4 pp. ACTI
  • E. Béchet, M. Kuna, Application of the X-FEM to the fracture of piezoelectric materials, IUTAM Symposium "Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems", September 1-4, 2009, Freiberg, Germany. ACTI
  • S. Berbenni, D. P. Do, G. Albert, D. Hoxha, Micromechanical Modelling of Isotropic Viscoelastic Behavior of Composites: Translated Field Approach. Proceedings of the 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, Virginia, USA, June 24-27, 2009. ACTI
  • S. Berveiller, B. Malard, E. Patoor, Intragranular austenite orientation evolution of a Cu-Al-Be SMA during an in-situ tensile test, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009. DOI : 10.1051/esomat/20090600 ACTI
  • S. Berveiller, M. Kemdehoundja, E. Patoor, D. Bouscaud, M.R. Berrahmoune, Influence of pre-strain and carbon content on delayed cracking phenomenon in unstable austenitic steels, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009. ACTI
  • X. F. Bi, G. Sutter, G. List, Y. X. Liu, Influence of Chip Curl on Tool-chip Contact Length in High Speed Machining, Mater. Sci. Forum, 626-627 (2009) 71-74. ACTI
  • Y. Chemisky, B. Piotrowski, T. Ben Zineb, E. Patoor, Numerical study of mean-field approach capabilities for shape memory alloys matrix composites description, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009. ACTI
  • P. CHEVRIER, A. RUSINEK, S. PHILIPPON, L. FAURE, E. DOSSOU, A. LODIGOWSKI, G.Z. VOYIADJIS, Evolution of an Original Device Allowing the Determination of the Dry Friction Coefficient in Dynamic Conditions, Workshop "Theoretical and Experimental Approaches for Dynamic Industrial Processes", Madrid, Leganés - 24-26 June 2009. ACTI
  • C. Esling, D. Y. Cong, Y. D. Zhang, J. M Raulot, H. Faraoun, X. Zhao, L. Zuo, Structure and Phase Stability of NiMnGa Ferromagnetic Shape Memory Alloys by Experimental and ab-initio Techniques, THERMEC'2009, Berlin, Germany, 2009. ACTI
  • G. Franz, F. Abed-Meraim, T. Ben Zineb, X. Lemoine, M. Berveiller. Strain localization analysis deduced from a large strain elastic-plastic self-consistent model for multiphase steels. 12th International Conference on Fracture, Ottawa (Canada), 12-17 Juillet 2009, 10 pp. ACTI
  • L. Iannucci, M. Evans, R. Irvine, E. Patoor, D. Osmont, Morphing Wing Design, MCM-IPT Conference, 22-23 June 2009, Lille. ACTI
  • N. Jacques, C. Czarnota, S. Mercier, A. Molinari, A micromechanical constitutive model for dynamic damage and fracture of ductile materials, IUTAM Symposium: Dynamic Fracture and Fragmentation, March 2009, Austin, Texas. ACTI
  • S. Kannan, C. Giraud-Audine, E. Patoor, Control of a Shape Memory Alloy (SMA) Actuator using Serie-Parallel Model Reference Adaptive Control (MRAC), ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS, September 20-24, 2009, Oxnard, USA, accepted. ACTI
  • P. Laheurte, W. Elmay, A. Eberhardt, T. Gloriant, F. Prima, E. Patoor, Development of nickel-free shape memory alloys for biomedical applications, Joint ASCE-ASME-SES Conference on Mechanics of Materials. June 24-27, 2009 Blacksburg, VA, USA, Conference Symposium on Shape Memory Alloys. ACTI
  • G. LE COZ, M. BENGHERSALLAH, A. DEVILLEZ, D. DUDZINSKI, Machining study of a hard to cut die forging material - Stellite 6, 5th International Conference on Design and Production of Machines and Dies/Molds, June 18-21 2009, Kusadasi, Turkey, Proceedings pp 275-280. ACTI
  • R. Ly, C. Giraud-Audine, R. Bigot, G. Abba, Longitudinal vibrations modeling of a piezoelectric actuator used in forming process (2009) IEEE 2009 Int. Conf. on Mechatronics, ICM 2009, art. no. 4957179. ACTI
  • R. Ly, C. Giraud-Audine, L. Morhain, R. Bigot, G. Abba, Experimentally Validated Approach for the Simulation of the Forging Process using Mechanical Vibration, 12th International ESAFORM Conference on Material Forming ESAFORM 2009, Twent, Holland, cd-rom. ACTI
  • M. MARINESCU, M. JRAD, A. DEVILLEZ, D.DUDZINSKI, Cutting Temperature Measurement during Drilling of Ti6Al4V, Comparison between Modelling and Experimental Results from Thrust and Torque Point of View, 12th CIRP Conference on Modelling of Machining Operations, May 7-8, 2009, San Sebastian - Spain. ACTI
  • S. Mercier, A. Molinari, N. Granier, F. Llorca, T. Grunenwald, Multiple necking in dynamic expansion of metallic hemispheres: theory and experiments, IUTAM Symposium: Dynamic Fracture and Fragmentation, March 2009, Austin, Texas. ACTI
  • T. Merzouki, C. Collard, N. Bourgeois, T. Ben Zineb, F. Meraghni, Coupling between experiment and numerical simulation of shape memory alloy multicrystal, ESOMAT 2009, 7-11 Sept. 2009, Prague, doi:10.1051/esomat/200906035. ACTI
  • M.H. Miguelez, R. Zaera, A. Molinari, A. Munoz-Sanchez, The influence of cutting speed in the residual stresses induced by HSM in AISI 316L steel, 12th CIRP Conference on Modelling of Machining Operations, San Sebastian, Spain, 2009. ACTI
  • F. Mohri, N. Damil, M. Potier-Ferry, Un modèle poutre 3D pour le calcul non linéaire des poutres à parois minces, Communication 71 session 16, 19ème Congrès Français de Mécanique, Marseille, 24-28 août 2009. ACTI
  • S. Nezamabadi, H. Zahrouni, J. Yvonnet, M. Potier-Ferry, Multiscale Microbuckling Analysis of Elastoplastic Long Fiber Composites, 7th EUROMECH Solid Mechanics Conference, Lisbon, Portugal. September 7-11, 2009. ACTI
  • B. Piotrowski, T. Ben Zineb, E. Patoor, A. Eberhardt, Analysis of Niobium precipitates effect on the thermo-mechanical behavior of a NiTiNb Shape Memory Alloy and Modeling, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009. ACTI
  • M. Rabahallah, T. Balan, F. Barlat, Anisotropic strain-rate potential based on multiple linear transformations, Esaform, Twente, avril 2009, sur CR-ROM. ACTI
  • N. Siredey-Schwaller, A. Eberhardt, E. Patoor, P. Bastie, Relation between crystal quality and fatigue life of a Cu-Al-Be single crystal shape memory alloy under repeated bending, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009. ACTI
  • V. Taupin, S. Berbenni, C. Fressengeas, O. Bouaziz. Towards a new mean field approach including internal length scale validated by a dislocation fields mechanics theory. Proceedings of the 1st International Conference on Material Modelling, Dortmund, Germany, September 15th-17th, 2009. ACTI
  • G.Z. VOYIADJIS, B. DELIKTAS, A. LODIGOWSKI, B.N. PALAZOTTO, S. PHILIPPON, A. RUSINEK, L. FAURE, P. CHEVRIER, High Rate and Frictional Effects in Wear of Metals, Workshop "Dynamic Behaviour of Materials", may 13-15, 2009, Metz - France. ACTI
  • P.M. Wasmer, G. Mussot-Hoinard, S. Berveiller, E. Patoor, A. Eberhardt, Kinetics of precipitation and mechanical behavior of CuAlBe single crystal drawn-wires, in ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, published by EDP Sciences, 2009. ACTI
  • Y. Wu, C. He, Y. Zhang, X. Zhao, L. Zuo, C. Esling, Effects of High Magnetic Field Annealing on the Nucleation Sites for Recrystallized Nuclei with {111} <112> Orientation in Cold-rolled IF Steel Sheet, THERMEC'2009, Berlin, Germany, 2009. ACTI
  • P. BOCHER, F. BRIDIER, L. TOUBAL, N. BOUTANA, E. UTA, N. GEY, M. HUMBERT, Dwell-Fatigue in Near Alpha Titanium Alloys: A Multiscale, Interdisciplinary Challenge, July 2009, Ottawa (CA), 12th International Conference on Fatigue, 12-17 (2009). ACTI
  • P. LIPINSKI, N. BONNET, A. TIDU, Development of a specific constitutive law for modeling of mini-component forming processes and its experimental identification and validation, K. Workshop "Dynamic behavior of Materials" Ed. Rusinek & P. Chevrier (2009) 283-293. ACTI
  • T. MOUDAKIR, S. GAUTIER, G. ORSAL, N. MALOUFI, D. J. ROGERS, F. HOSSEINI TEHERANI, F. JOMARD, M. ABID, N. FRESSENGEAS, A. OUGAZZADEN, "MOVPE growth of InGaN on ZnO-buffered Si(111) substrates for solar cells applications", June 7-10, Ulm-Germany, Proc. EW-MOVPE XIII Conference (2009) 249. ACTI
  • M. Hattab, J.M. Fleureau, 2009, Experimental study of kaolinite particle orientation mechanism, The 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials – June 24-27 Blacksburg, VA. ACTI
  • “Effects of the Sticking-Sliding zones on the tool wear and coating delamination in machining’’,S. Bahi, M. Nouari, A. Moufki, M. Elmansori, A. Molinari ,The 36th International Conference On Metallurgical Coatings And Thin Films ICMCTF 2009, San Diego, California, USA, 2009. ACTI
  • B. Erzar, E. Buzaud, C. Pontiroli, P. Forquin, Tensile strength of mortar over a wide range of strain rate. – DYMAT, 7-11 September 2009, Brussels, Belgium. doi: 10.1051/dymat/2009086, pp. 603-609, 2009. ACTI
  • A. Arias, P. Forquin, R. Zaera, Impact damage in concrete targets subjected to perforation of high velocity metallic fragment. –DYMAT, 7-11 September 2009, Brussels, Belgium. doi: 10.1051/dymat/2009171, pp. 1215-1221, 2009. ACTI
  • H. Miguélez, R. Zaera, R. Cheriguene, A. Molinari Numerical analysis of the influence of cutting speed in machined induced residual stresses in aero-engine alloys 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (DYMAT 2009), Bruxelle (Belgium) Date: 7 - 11 September 2009 ACTI
  • Aden-Ali S., Chamat A. , Gilgert J. , Petit E., Dominiak S., Azari Z.  Fatigue Resistance of hot-dip galvanized hot-rolled and high silicon TRIP steel.  Proceed. 12th Int. Conf. on Fracture (12-17 june 2009, Ottawa, Canada).  ACTI
  • Aden-Ali S., Chamat A., Gilgert J., Petit E., Dominiak S., Azari Z.  Influence de la fissuration des couches intermétalliques sur la résistance à la fatigue d’un acier TRIP après galvanisation au trempé à chaud.   9ième congrès de Mécanique.  Marrakech, Maroc 21-24 avril 2009.   (publication dans la revue de Mécanique Appliquée Théorique). ACTI
  • Aden-Ali S., Gilgert J., Petit E.J., Azari Z.  Effect of hot-dip galvanization on fatigue properties of advanced high-strength steels for automotive applications.  Fatigue Design 2009  (Senlis, France, 25-26 novembre 2009)  Poster + contribution aux actes du colloque. ACTI
  • S. Li, X. Y. Wang, G. W. Qin, W. L. Pei, Y. P. Ren, L. Zuo, Y. D. Zhang, C. Esling, Photocatalytic Activities of Iron Oxyhydroxide Nanorods Synthesized by Hydrothermal Technology, PROCEEDINGS OF 2ND INTERNATIONAL SYMPOSIUM ON PHYSICS AND HIGH-TECH INDUSTRY, 4TH INTERNATIONAL SYMPOSIUM ON MAGNETIC INDUSTRY, 1ST SHENYANG FORUM FOR DEVELOPMENT AND COOPERATION OF HIGH-TECH INDUSTRY IN NORTHEAST ASIA (2009), 137-139.
    ACTI
  • F. ABDOUN, L. AZRAR, E.M. DAYA, Forced vibration of viscoelastic sandwich shells, Int. Conf. Smart Materials and Adaptive Structures: Mathematical Modelling and Computation, 14-16 April 2008, Tangier Morocco ACTI
  • G. Altmeyer, F. Abed-Meraim, T. Balan. Comparison of forming limit diagrams predicted with different localization criteria, 12th International Conference Metal Forming, Krakow (Poland), 21-24 Septembre 2008, pp. 24-31. ACTI
  • T. Balan, F. Abed-Meraim. Numerical investigation of the limit strains in sheet forming involving bending, International Conf. on Tech. of Plasticity, 9th ICTP, Gyeongju, Korea, septembre 2008, pp. 690-695. ACTI
  • Y. Chemisky, A. Duval, B. Pietrowski, T. Ben Zineb, E. Patoor, Numerical Tool Based on Finite Element Method for SMA Structure Design, ASME Conference on Smart materials, Adaptive Structures and Intelligent Systems (SMASIS), Ellicott City, Maryland, USA, October 28-30, 2008, Vol. 1, pp. 411-419. ACTI
  • Y. Chemisky, A. Duval, V.L. Tahiri, A. Eberhardt, E. Patoor, Modeling the behavior of a SMA/elastomer composite, Proc. of ICOMAT 2008, Santa FE, NM, USA. ACTI
  • A. Guedri, B. Merzoug, Moe Khaleel, A. Zeghloul, Reliability analysis of low alloy ferritic piping materials, AIQ-ICF, 1-5 juin 2008, Alger, Algérie. ACTI
  • A. Guedri, B. Merzoug, A. Zeghloul, Improving mechanical properties of API X60/X70 welded pipeline, African InterQuadrennial (AIQ) - International Conference on Fracture (ICF), 1-5 juin 2008, Alger, Algérie. ACTI
  • A. Guedri, O. Oussouaddi, S. Tlili, B. Merzoug, A. Zeghloul, Simulations et calcul des vitesses de propagation d'une fissure de fatigue dans des aciers pour tubes, 2nd Conférence Internationale sur les Sciences de la Mécanique 16- 18 Novembre 2008, Oum El Bouaghi - Algérie. ACTI
  • B. Haddag, F. Abed-Meraim, T. Balan. Strain localization and damage prediction during sheet metal forming, 11th International Esaform Conference on Material Forming, Lyon, 23-25 Avril 2008, CD-ROM 4 pp. ACTI
  • Y. Koutsawaa, E.M. Daya, M. Cherkaoui, Exploring avenues on the design of high loss and stiff material through micro/nano-mechanical modeling: application to automotive windshield design, Int. Conf. Smart Materials and Adaptive Structures: Mathematical Modelling and Computation. 14-16 April 2008, Tangier, Morocco. ACTI
  • M. MARINESCU, A. DEVILLEZ, D.DUDZINSKI, Temperature measurements with three different techniques during the drilling of Ti6Al4V with various drill geometries, 3rd CIRP International Conference on High Performance Cutting, Dublin, Ireland, June 2008. ACTI
  • N. MOUSTAGHFIR, N. JACQUES, E.M. DAYA, Forced non linear vibaration of composite beams, Int. Conf. Smart Materials and Adaptive Structures: Mathematical Modelling and Computation. 14-16 April 2008, Tangier, Morocco. ACTI
  • G. Mussot-Hoinard, E. Patoor, A. Eberhardt, Influence of resistance welding on the behaviour of a CuAlBe single crystalline shape memory alloys, ICOMAT 2008, Santa Fe, New Mexico, USA, June 30-July 4, 2008. ACTI
  • S. Nezamabadi, J. Yvonnet, H. Zahrouni, M. Potier-Ferry, Multiscale buckling analysis of heterogeneous materials, 8th. World Congress on Computational Mechanics (WCCM8) and 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), June 30 - July 5, 2008, Venice, Italy. ACTI
  • M.S. RECHDAOUI, L. AZRAR, S. BELOUETTAR, E.M. DAYA, M. POTIER-FERRY, Active vibration control of piezoelectric sandwich beams at Large Amplitudes: primary and secondary resonance International Conference on Smart Materials and Adaptive Structures: Mathematical Modelling and Computation, 14-16 April 2008, Tangier, Morocco. ACTI
  • X. Soldani, A. Moufki, A. Molinari, E. Budak, E. Ozlü, High Speed Machining of AISI 1050 Steel: Modelling and Experimental Validation, 11th ESAFORM 2008 conference on material forming, Lyon, France, 23-25 april 2008. ACTI
  • M. Teaca, M. Martiny, G. Ferron, Sheet-Metal Plastic Anisotropy Identified by Mixed Experimental-Numerical Method, Int. Conf. Comp. Solid Mechanics, CSM2008, November, 27-30, 2008, Hochiminh City, Vietnam. ACTI
  • D.Y. CONG, Y.D. ZHANG, C. ESLING, Y.D. WANG, X. ZHAO, L. ZUO, Determination of crystal structure and crystallographic characteristics in ni-mn-ga ferromagnetic shape memory alloys, Conference Information: 5th International Conference on Advanced Materials and Processing, Date: SEP 02-05, 2008 Harbin Inst Technol Harbin Peoples R China, International Journal Of Modern Physics B, 23 (2009) 1771-1776. ACTI
  • F. Gerspach, N. Bozzolo, F. Wagner "On the stability of recrystallization textures in low alloyed Zirconium sheets", in Ceramic Transactions, 201, 429-436, 2008 ACTI
  • Y. WU, C. HE, Y. ZHANG, X. ZHAO, Y. ZONG, C. ESLING. Characteristics of recrystallization texture of cold-rolled IF steel sheet annealed with a magnetic field in transverse direction, Ceramics International, 200 (2008) 389-396. ACTI
  • Y. ZHANG, C. ESLING, M. CALCAGNOTTO, H. KLEIN, X. ZHAO, L. ZUO. Eutectoid point shift and orientaiton relationships between ferrite and cementite in pearlite in a high magnetic field, Ceramic Transactions, 200 (2008) 381-388. ACTI
  • T. Watanabe, X. Zhao, L. Zuo, S. Tsurekawa, C. Esling, Y. D. Zhang. New approach to texturing and grain boundary engineering by magnetic field application, Ceramic Transaction, 200 (2008) 421-434. ACTI
  • C. PERRINT. RICHETONS. BERBENNIM. BERVEILLER, H. VEHOFF, Role of intra-granular plastic slip heterogeneities on lattice rotations: comparisons between experimental measurements and a new micromechanical modeling, MMM 2008, Proceedings of the 4th International Conference on Multiscale Materials Modeling, Tallahassee, 27-31 October, 2008, ed. A. El-Azab, pp. 225-229. ACTI
  • D. Y. Cong, Y. D. Zhang, C. Esling, Y. D.Wang, X. Zhao, L. Zuo, CRYSTALLOGRAPHIC FEATURES DURING MARTENSITIC TRANSFORMATION IN Ni-Mn-Ga FERROMAGNETIC SHAPE MEMORY ALLOYS, Ceramic Transactions, 200, 397-403, 2008. ACTI
  • F. Laouafa, A. Daouadji, F. Darve Experimental and numerical modelling of diffuse mode of failure in very loose sands, 8th International Workshop on Bifurcations and Degradations in Geomaterials, Lake Louise, Alberta, Canada, 2008 ACTI
  • C.S. Chang, P.-Y. Hicher, A. Daouadji, Instability of granular soils at constitutive level, 8th International Workshop on Bifurcations and Degradations in Geomaterials, Lake Louise, Alberta, Canada, 2008 ACTI
  • Aden−ali S., Chamat A. , Gilgert J., Petit E.J., Gilles M., Dominiak S., Azari Z.   Evolution of the fatigue resistance of silicon−rich TRIP steel after hot−dip galvanization.   « Dynamic fracture and damage of brittle and ductile materials and its industrial applications »  (Sept 3-5, 2008, Poznan, Pologne). ACTI
  • B. Beausir, L.S. Toth, A new flow function to model texture evolution in symmetric and asymmetric rolling, Proc. Int. Conf. on Microstructure and texture in steels, Eds. Arunansu Haldar, Satyam Suwas and Debashish Bhattacharjee, Springer Verlag, 2009, pp. 415-420, MATS2008, Jamshedpur, India, February 4-7, 2008. ACTI
  • H. KRIAA, A. GUITTON, N. MALOUFI, Electron channeling contrast imaging: influence of diffraction conditions on the dislocation contrast. Journées Annuelles SF2M, 23-25 Octobre 2017 ACTN
  • C. MAUDUIT, R. KUBLER, L. BARRALLIER, S. BERVEILLER, Q. PUYDT, Modélisation de la tenue en fatigue des aciers à transformation de phase austénite-martensite après grenaillage de précontrainte, Congrès Français de Mécanique, Lyon, 24-28 août, 2015 ACTN
  • F. XU, M. POTIER-FERRY, S. BELOUETTAR, Y. KOUTSAWA, P. VENTURA. Finite element modeling of surface morphological instabilities of film-substrate systems. Proceedings of 12ème Colloque National en Calcul des Structures (CSMA 2015), Giens, Var, France, May 18-22, 2015, 4 pages. ACTN
  • F. XU, M. POTIER-FERRY. A numerical framework for pattern formation modeling of film-substrate systems. 22ème Congrès Français de Mécanique (CFM 2015), Lyon, France, August 24-28, 2015, 6 pages. ACTN
  • L. Weiss, P. Acquier, L. Germain, D. Boisselier, E. Fleury and A. HazotteMicrostructural analyses of Ti-6Al-4V samples made by additive manufacturing, Colloque STPMF 2015 : Science et Technologie des Poudres et Matériaux Frittés, 08-10/4/2015, Nancy (F), Actes dans Récents Progrès en Génie des Procédés 107 (2015) ACTN
  • Y. ELHACHI, B. MALARD, S. BERVEILLER, J. WRIGHT, Synchrotron analysis of lattice rotations and internal stress in individual grains during cyclic stress-induced martensitic transformation in a plolycrystalline SMA alloy: new opportunities of fatigue probing with the 3DXRD method, Journées de Printemps de la SF2M, Paris, 27-28 mai, 2015 ACTN
  • N. Sabkhi, M. Nouari, A. Moufki, C. Pelaingre, et C. Barlier, Modélisation des efforts de coupe en taillage d’engrenages à la fraise-mère, 22ème Congrès Français de Mécanique, (2015). ACTN
  • Abed-Meraim F, Peerlings RHJ, Geers MGD. Analyse de bifurcation et critères de force maximum dans la prédiction des limites de striction des tôles métalliques étirées. 12èmeColloque National en Calcul des Structures, Giens, 18-22 Mai 2015, CD-ROM 4 pp. ACTN
  • Kpeky F, Boudaoud H, Abed-Meraim F, Daya EM. Modélisation par éléments finis de type solide-coque de structures piézoélectriques. Actes du 22ème Congrès Français de Mécanique, Lyon, 24-28 Août 2015, CD-ROM. ACTN
  • N. DESPRINGRE, Y. CHEMISKY, J. FITOUSSI, F. MERAGHNI. Endommagement en fatigue du PA66 renforcé par des fibres de verre courtes : modélisation micromécanique et stratégie d'identification multi-échelles, C. R des JNC 19, Lyon, France, 29, 30 juin et 01 juillet 2015 ACTN
  • L. IGHIL AMEUR, G. ROBIN, M. HATTAB. Caractérisation des propriétés élastiques d'un kaolin sous chargement oedométrique par propagation ultrasonore. 32émes Rencontres Universitaires de Génie Civil (AUGC2014). 4-6 juin 2014. Orléans. France ACTN
  • F. XU, S. BELOUETTAR, H. HU, M. POTIER-FERRY. A novel nonlocal reduction-based coupling approach via Arlequin method on instability patterns. Proceedings of 11ème Colloque National en Calcul des Structures (CSMA 2013), Giens, Var, France, May 13-17, 2013, 8 pages. ACTN
  • I. Tiba, T. Richeton, S. Berbenni, C. Motz, H. Vehoff, Etude de l’activité plastique dans des bi-cristaux métalliques: modélisation et expériences, Actes du Congrès Français de Mécanique 2013, Bordeaux, August 26-30, 2013. ACTN
  • S. BERBENNI, L. CAPOLUNGO. Homogénéisation des matériaux hétérogènes élastoviscoplastiques basée sur la technique des « champs translatés »: extension « affine » au cas non linéaire. Actes du 21ième Congrès Français de Mécanique (CFM 2013), Session S21.Approches multi-échelles en mécanique des matériaux (Resp. : T. Palin-Luc, S. Forest, D. Kondo), 26-30 Aout 2013, Bordeaux. ACTN
  • V. Taupin, L. Capolungo, C. FressengeasDisclination mediated plasticity in shear-coupled boundary migration, plasticité 2013, Paris, France, 2013. ACTN
  • Altmeyer G, Abed-Meraim F, Balan T. Overview of the theoretical relations between necking and strain localization criteria. Actes du 21ème Congrès Français de Mécanique, Bordeaux, 26-30 Août 2013, CD-ROM 8 pp. ACTN
  • Trinh VD, Abed-Meraim F, Combescure A. Formulation d’éléments finis quadratiques de type solide-coque et leur évaluation sur des cas tests standards. 11èmeColloque National en Calcul des Structures, Giens, 13-17 Mai 2013, CD-ROM 8 pp. ACTN
  • A. HAZOTTE, E. BOUZY, Massive transformation in Ti-based intermetallics. Journées Annuelles de la SF2M, Paris, France,29-31 oct. 2012, Matériaux & Techniques 100 S1 (2012) 108-110 ACTN
  • X. Wei, J-M. Fleureau, M. Hattab. Etude experimentale par analyse d’images de la dessiccation et de la fissuration d’une Kaolinite. Journées Nationales de Géotechnique de l’Ingénieur (JNGG) Bordeaux,  4-6 Juillet, 2012. ACTN
  • M. BILASSE, L. AZRAR, E. M. DAYA, Vibration non linéaires des plaques sandwichs viscoélastiques basées sur les modes complexes’, 10ème Congrès de Mécanique 19 – 22 Avril 2011 Oujda (Maroc) ACTN
  • W. Elmay, E.Patoor, B.Bolle, T.Gloriant, F.Prima, A.Eberhardt and P.Laheurte, Optimization of mechanical properties of Ti-Nb binary alloys for biomedical applications, le XXXVIème Congrès de la Société de Biomécanique, 31 Aoùt- 2 Septempbre (2011), Besançon -France. ACTN
  • B. Erzar, P. Forquin. Modélisation mésoscopique du béton sous impact, CSMA2011, Giens, France ACTN
  • M. Nasraoui, P. Forquin, L. Siad, A. Rusinek. Comportements quasi-statique et dynamique du PMMA – Expérimentation et modélisation. 20ième Congrès Français de Mécanique, Besançon, 2011 ACTN
  • R. ECHCHORFI, N. BOURGEOIS, F. MERAGHNI, E. PATOOR, Identification de paramètres de comportement d’un alliage à mémoire de forme, 20ème Congrès Français de Mécanique Besançon, 29 août au 2 septembre 2011. ACTN
  • C. Caër, J.S. Lecomte, S. Berbenni, E. Patoor. Analyse par nanoindentation de l’apparition de variantes dans les alliages à mémoire de forme – Actes du 20ième Congrès Français de Mécanique (CFM 2011), Session 29: Matériaux fonctionnels et structures adaptatives ; Besançon, 28 Août-2 septembre 2011. ACTN
  • Franz G, Abed-Meraim F, Ben Zineb T, Lemoine X, Berveiller M. Impact of microstructural mechanisms on ductility limits. Journées annuelles de la SF2M, Nancy, 4-6 Juillet 2011, CD-ROM 4 pp. ACTN
  • L.Z. Mansouri, H. Chalal, F. Abed-Meraim, T. Balan. Prédiction de la localisation par une approche d’endommagement micromécanique couplée à une analyse de bifurcation : application à la mise en forme des tôles. Actes du 20ème Congrès Français de Mécanique, Besançon, 28 Août - 2 Sept. 2011, CD-ROM 6 pp. ACTN
  • X. Wei, T. HN Luong, M. Hattab, J-M. Fleureau. Etude expérimentale de la fissuration par dessiccation dans une kaolinite. XXIX Rencontres Universitaires de Génie Civil (AUGC2011). 2011. 29-31 mai. Tlemcen. ACTN
  • R. Ouahab, R. Pesci, S. Berveiller, E. Patoor, Influence de la température sur le comportement des aciers bainitiques Application à l’acier 16MND5, Matériaux 2010, Nantes (France). ACTN
  • C. Wolff, H. Couque, S. Mercier, A. Molinari, F. Bernard. Mod\élisation numérique du SPS pour l'élaboration de nickel,Mat\ériaux 2010, Nantes, France, 18-22 octobre 2010. ACTN
  • L. Germain, P. Blaineau, N. Gey, M. Humbert, D. Barbier, A. Perlade, How the shape and orientation of the prior austenitic grains can be deduced from inherited alpha' orientation maps in steels, Solid-Solid Phase transformations in inorganic Materials - PTM 2010, 6-11 june 2010, Avignon (F) (publication in Solid State Phenomena Vols. 172-174 (2011) pp 911-915) ACTN
  • J-C. Hell, M. Dehmas, G. Geandier, N. Gey, S. Allain, A. Hazotte, J.P. Chateau, Influence of the austempering temperature on the microstructure and crystallography of a carbide-free bainitic steel , Solid-Solid Phase transformations in inorganic Materials - PTM 2010, 6-11 june 2010, Avignon (F) (publication in Solid State Phenomena Vols. 172-174 (2011) pp 797-802) ACTN
  • J. Teixeira, L. Germain, E. Lamielle, N. Gey, E. Aeby-Gautier, Heterogeneous precipitation of the alpha phase on beta/beta grain boundaries in the beta metastable Ti17 titanium alloy: experimental study of the associated kinetics, morphology and microtexture, Solid-Solid Phase transformations in inorganic Materials - PTM 2010, 6-11 june 2010, Avignon ACTN
  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmitonnet, N. Legrand, P. Buessler, Etude numérique du flambage sous contraintes résiduelles au cours du laminage des tôles métalliques, April 21-24, 2009, Marrakech, Morocco. ACTN
  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmitonnet, N. Legrand, P. Buessler, Modélisation du flambage des tôles laminées sous contraintes résiduelles, 9e colloque national en calcul des structures, May 25-29, 2009, Giens, France, ACTN
  • S. Abdelkhalek, H. Zahrouni, M. Potier-Ferry, P. Montmitonnet, N. Legrand, P. Buessler, Modélisation numérique du flambage des plaques minces et applications au laminage, 19ème Congrès Français de Mécanique, August 24-28, 2009, Marseille, France. ACTN
  • G. Altmeyer, F. Abed-Meraim, T. Balan. Modélisation de critères de localisation : prédiction de l'orientation des bandes de localisation et tracé de courbes limites de formage. Actes du 19ème Congrès Français de Mécanique, Marseille, 24-28 Août 2009. ACTN
  • M. Bilasse, E.M. Daya, Modélisation par éléments finis des vibrations non linéaires d'une poutre sandwich à coeur viscoélastique, Congrès de Mécanique, El Jadida, Maroc, 2009. ACTN
  • M. Bilasse, E.M. Daya, Modélisation par éléments finis des vibrations non linéaires d'une poutre sandwich à coeur viscoélastique, Congrès Francais de Mécanique, Marseille, France 2009. ACTN
  • M. Bilasse, E.M. Daya, Modélisation par éléments finis des vibrations non linéaires d'une poutre sandwich à coeur viscoélastique, Colloque national en calcul de structures, Giens, France 2009. ACTN
  • H. Boudaoud, I. Charpentier, A. Lejeune, M. Potier-Ferry, H. Zahrouni, Différentiation automatique et code éléments finis. Applications au contact unilateral, 9e COLLOQUE NATIONAL EN CALCUL DES STRUCTURES, Giens, France, 25-29 mai 2009. ACTN
  • Y. Bougherira, D. Entemeyer, C. Fressengeas, T. Lebedkina, N. Kobelev, M. Lebyodkin, Caractérisation multi - échelle de l'hétérogénéité spatio-temporelle de l'effet Portevin - Le Chatelier, Congrès Français de Mécanique, Marseille, 25-28 août 2009. ACTN
  • Y. Chemisky, E. Patoor, Simulation des effets liés à la précipitation sur le comportement macroscopique des NiTi, XIXième Congrès Français de Mécanique, Marseille, 24-28 Août 2009. ACTN
  • M.C. dos Santos Freitas, L.P. Moreira, R. Makkouk, G. Ferron, Previsoes de Deformaçoes Limites em Chapas Metalicas sob Estiramento Biaxial, 5°COBEF, Belo Horizonte, Brésil, avril 2009. ACTN
  • B. Erzar, P. FORQUIN, Influence de l'eau libre sur la résistance et l'endommagement en traction dynamique des bétons. MécaDymat, 2009, Bourges, France. ACTN
  • L. Faure, S. Philippon, A. Lodygowski, G. Voyiadjis, A. Rusinek, P.Chevrier, E. Dossou, Design of a dynamometer capable of capturing the dry friction force in dynamic conditions, Workshop on dynamic behavior of materials, Metz, France, 13-15 May 2009. ACTN
  • A. Hachichi, S.A. Bourokba, A. Benaissa, J-M. Fleureau, M. Hattab, S. Taibi, Etude des des phénomènes retrait-gonflement et stabilisation des sols gonflants dans la région d'Oran (Algérie), 19ème congrès de mécanique, Colloque Euro-méditerranée CFM2009 - Marseille 24-28 aout 2009. ACTN
  • G. List, G. Sutter, X. Bi, Morphologie des copeaux à grande vitesse, 15ème Colloque National de la Recherche en IUT, juin 2009, Lille, France. ACTN
  • G. List, G. Sutter, X.F. Bi, Prédiction de l'Usure des Outils en Usinage Grande Vitesse, 19ème Congrès français de Mécanique, août 2009, Marseille, France. ACTN
  • N. Moustaghfir, N. Jacques, E.M. Daya, Etude comparative des vibrations non-linéaires amorties de structures composites. Colloque national en calcul de structures, Giens, France 2009. ACTN
  • H. NOURI, C. CZARNOTA, F. MERAGHNI, P. LORY, Modélisation et identification expérimentale de l'endommagement de thermoplastiques renforcés sous chargement cyclique, JNC-16. Toulouse, juin 2009. ACTN
  • Y. PAYANDEH, F. MERAGHNI, E. PATOOR, A. EBERHARDT, Estimation de la résistance de l'interface de composite époxyde - renfort en alliage à mémoire de forme (NiTi), 16èmes Journées Nationales sur les Composites, JNC-16, Toulouse, juin 2009. ACTN
  • B. Piotrowski, T. Ben Zineb, A. Eberhardt, E. Patoor, Modélisation d'un Alliage à Mémoire de Forme contenant des inclusions élastoplastiques, XIXième Congrès Français de Mécanique, Marseille, 24-28 Août 2009. ACTN
  • M. Rabahallah, T. Balan, Potentiel plastique phénomènologique pour modéliser l'anisotropie plastique des tôles métalliques, CSMA, Giens, mai 2009, pp. 687-693. ACTN
  • V. Taupin, S. Berbenni, C. Fressengeas, O. Bouaziz, Vers une approche à champs moyens à longueurs internes validée par mécanique des champs de dislocations: application aux effets de taille de particule dure dans un matériau de type ferrite / carbures, Congrès Français de Mécanique, Marseille, 25-28 août 2009. ACTN
  • M. Teaca, M. Martiny, I. Charpentier, G. Ferron, Identification du comportement plastique des tôles métalliques anisotropes, CFM, Marseille, août 2009. ACTN
  • A. Tri, H. Zahrouni, M. Potier-Ferry, Perturbation technique and method of fundamental solution to solve nonlinear poisson problems, April 21-24, 2009, Marrakech, Morocco, ACTN
  • V.D. Trinh, F. Abed-Meraim, A. Combescure. Une nouvelle formulation solide-coque basée sur le concept "Assumed Strain" pour l'élément fini prismatique à six-noeuds "SHB6". 9ème Colloque National en Calcul des Structures, Giens, 25-29 Mai 2009, 6 pp. ACTN
  • A. SETTEFRATI, S. DENIS, G. BRUNETTI, A. HAZOTTE, E. BOUZY, Z. AYADI – “Détermination des contraintes internes dans un superalliage à base de nickel“ - Conf. MECAMAT 2009, 27-30 janvier 2009, Aussois (F) ACTN
  • G. Altmeyer, F. Abed-Meraim, T. Balan. Prediction de courbes limites de formage avec les criteres de localisation de Marciniak-Kuczynski et de Hill, Mecamat, Aussois, janvier 2008, pp. 10-13. ACTN
  • B. Haddag, F. Abed-Meraim, T. Balan. Prediction de courbes limites de formage avec un modèle elasto-plastique-endommagement et un critere de localisation, Mecamat, Aussois, janvier 2008, pp. 66-69. ACTN
  • T. Hammad, M. Hattab, Mélanges argileux montmoriollite/kaolinite sur chemins oedométriques et triaxiaux, Acts Eds LCPC, Journées nationales de géotechnique et de géologie de l'ingénieur. Nantes juin 2008, pp 627-634. ACTN
  • M. C. DOS SANTOS FREITAS, L. P. MOREIRA, R. MAKKOUK, G. FERRON, Analise de deformaçoes limites em chapas metalicas, 63° Congresso anual da ABM, Santos, SP, Brasil, 28 juillet 1er Aout 2008, pp.206-216. ACTN
  • C. DASCALU, Two-scale computational modeling of dynamic failure in brittle solids: branching instabilities. 14th U.S. National Congress for Computational Mechanics. July 2017, Montreal, Canada. COM
  • M. Lebyodkin, T. Lebedkina, Intermittence, synchronisation et ondes de déformation plastique lors de l’effet Portevin-Le Chatelier, LA 19e RENCONTRE DU NON LINÉAIRE, 15-17 mars 2016, Paris COM
  • X.Y. Sun, V. Taupin, C. Fressengeas and P. Cordier, Continuous description of the atomic structure of a grain boundary using dislocations and generalized-disclination density fields, MRS Fall Meeting, Boston, USA (2016). COM
  • Z-Z. SHI, Y. ZHANG, F. WAGNER, T. RICHETON, P-A. JUAN, J-S. LECOMTE, L. CAPOLUNGO, S. BERBENNI, Micromechanical analysis of secondary extension twinning in a magnesium alloy, International Symposium on Plasticity and Its Current Applications (PLASTICITY 2016), Kona, Hawaii, January 3-9, 2016. COM
  • T. RICHETON, K.E.K. AMOUZOU, S. BERBENNI, M.A. LEBYODKIN, Elasto-viscoplastic self-consistent modeling of hardening mechanisms in commercially pure alpha-titanium in tensile condition, International Workshop on Mechanistic Behaviour of HCP Alloys, Oxford, United Kingdom, March 30 - April 1, 2016. COM
  • Z-Z. Shi, Y. Zhang, J-S. Lecomte, F. Wagner, T. Richeton, P-A. Juan, , L. Capolungo, S. Berbenni, Micromechanical analysis of secondary extension twinning in a magnesium alloy, The 22nd International Symposium on Plasticity and Its Current Applications (ICOTOM),Sheraton Kona Resort & Spa Keauhou Bay, Hawaii Jan. 3-9, 2016 COM
  • L.T. Le, T. Chauve, M. Bernacki, S. Berbenni, M. Montagnat, T. Richeton, Un modèle de plasticité cristalline considérant le transport des dislocations géométriquement nécessaires sur les systèmes de glissement : application aux mono- et multi-cristaux de glace, Colloque Plasticité, Poitiers, April 11-13, 2016.  COM
  • V. TAUPIN, J. Chevy, C. FRESSENGEAS, Effects of interfaces and grain-to-grain interactions on shear banding in Al-Cu-Li rolled sheets, MMM 2016, Dijon, France, 2016. COM
  • M. Mondet, E. Barraud, S. Lemonnier, N. Allain, T. Grosdidier, Optimisation des propriétés mécaniques de l’alliage de magnésium AZ91 élaboré par frittage SPS à partir d’une poudre atomisée métastable, La métallurgie, quel avenir !, Saint-Etienne, 2016 COM
  • M. Mondet, E. Barraud, S. Lemonnier, N. Allain, T. Grosdidier, Development and optimisation by Spark Plasma Sintering of the AZ91 magnesium alloy from a metastable as-atomised powder, ic-cmtp4, Miskolc-Lillafüred, 2016 COM
  • F. ADZIMA, T. BALAN, P.Y. MANACH, L. TABOUROT. Comparative study of phenomenological and CPFEM based modeling approaches in sheet metal forming : application to micro-forming process simulation, International Symposium on Plasticity 2016, Kona (USA), 3 - 9 January 2016 COM
  • C. DASCALU, Multiscale modeling of dynamic failure in brittle solids. IUTAM Symposium on Dynamic Instabilities in Solids. May 2016. Madrid, Spain. COM
  • T.A. Lebedkina, M.A. Lebyodkin, D.A. Zhemchuzhnikova, R.O. Kaibyshev, Unusual behavior of deformation bands during jerky flow in an AlMg alloy containing precipitates, Colloque Plasticité 2015, Autrans, 28-30 avril, Livre de résumés, p. 14. COM
  • Z.-Z. Shi, Y. Zhang, F. Wagner, T. Richeton, P.-A. Juan, J.-S. Lecomte, L. Capolungo, S. Berbenni, Analyse micromécanique du maclage secondaire dans un alliage de magnésium, Colloque Plasticité, Autrans, April 28-30, 2015. COM
  • J. GUYON, A. HAZOTTE, F. WAGNER, E. BOUZY Return to equilibrium of metastable alpha phase and Recrystallization in Ti48Al2Cr2Nb intermetallic alloy, Gamma (TiAl) Alloy Technology 2015, April 26-30, 2015, Nanjing, China COM
  • T. Richeton, S. Berbenni, I. Tiba, Incompatibility stresses at grain and twin boundaries: influence of anisotropic elasticity on slip activity, EUROMECH-Colloquium 570, Houffalize, Belgium, October 20-23, 2015. COM
  • S. BERBENNI, V. TAUPIN, C. FRESSENGEAS. A numerical spectral approach based on Discrete Fourier Transforms for the modeling and simulation of interfacial defects. EUROMECH Colloquium 570, « Multiscale analysis of the impact of microstructure on plasticity and fracture interface-dominated materials », Houffalize, Belgique, 20-23 octobre 2015 COM
  • B. MALARD, S. BERVEILLER, Y. ELHACHI, J. WRIGHT, Synchrotron analysis of lattice rottaions and internal strains in individual grains during stress-induced tranformation: new oppportunities for mechanical characterisation, European Solid Mechanics Conference (ESMC 2015), Madrid, Spain, 6-10 July, 2015 COM
  • R. GUIHEUX, S. BERVEILLER, R. KUBLER, D. BOUSCAUD, Q. PUYDT, E. PATOOR, Effect of shot peening on microstructure of steels exhibiting a TRIP effect - Experimental and Modelling Approaches, International Conference on Mechanics of Materials (ICM12), Karlsruhe, Allemagne, 10-14 Mai, 2015 COM
  • T. ORS, GUINEBRETIERE R., MICHA J.-S., ROBACH O., N. GEY, M. HUMBERT, GOURAUD F., MICHEL V., CASTELNAU O., Combining X-Rays microdiffraction, EBSD and neutrons: Internal Stresses in Polycrystalline ZrO2 Based Materials, Size and Strain VII, 21-24 sept. 2015, Oxford (UK) COM
  • W. Wei, M. Duc, T. Reuschlé, H. Souli, S. Taibi, J-M. Fleureau, M. Hattab. Micro-Macro Mechanical Study of a clay Rock on Drying-Wetting Path. 6th International Conference, Clays in Natural and Engineered Barriers for Radioactive Waste Confinement, Brussels - March 23-26, 2015. COM
  • X. Wei, L. Ighil Ameur, J-M. Fleureau, P. Bompard, M. Hattab. Highlighting some mechanisms of crack formation and propagation in clays on drying-path. Conference of the ASCE Engineering Mechanics Institute EMI 2015. USA, Stanford, June 16 – 19. 2015. COM
  • Y. SAMIH, T. GROSDIDIER, S. Z. HAO, C. DONG, Modification of metallic surfaces by mechanical and thermo-chemical duplex treatments. Global Advanced Materials and Surfaces (GAMS 2015), December 2015, Dubaï (United Arab Emirates). COM
  • C. DASCALU Localization analysis for a dynamic two-scale damage model, EMI Conference 2015, Stanford University, June 16-19, 2015. COM
  • M. Mondet, E. Barraud, S. Lemonnier, N. Allain, T. Grosdidier, Elaboration et consolidation d’alliages de magnésium par frittage SPS, STPMF, Nancy, 2015 COM
  • M. Mondet, E. Barraud, S. Lemonnier, N. Allain, T. Grosdidier, Microstructure and mechanical properties of magnesium based composites produced by SPS sintering, ICCS 18, Lisbonne, 2015 COM
  • F. ADZIMA, T. BALAN, P.Y. MANACH, L. TABOUROT, J.L. DIOT. Micro-formage de composants à partir de tôles ultrafines en alliages de cuivre, 22 ème Congrès Français de Mécanique (C.F.M.), Lyon, 24 - 28 Aout 2015 COM
  • F. ADZIMA, T. BALAN, P.Y. MANACH, S. THUILLIER, L. TABOUROT. Towards the accurate modeling of ultra-thin Cu-based alloy sheets. Application to the forming of miniature electrical connectors, International Symposium on Plasticity 2015, Montego Bay (Jamaica), 3 - 9 January 2015 COM
  • H. MANSOUR, J. GUYON, M.A. CRIMP, N. GEY, B. BEAUSIR, N. MALOUFI. SACP collection on the GEMINI type electron column for Accurate Electron Channeling Contrast Imaging, Electron Backscatter Diffraction meeting, March 31-01, 2014, London, United Kingdom COM
  • M. SALIB, J. TEIXEIRA, L. GERMAIN, N. GEY, E. GAUTIER, How the initial beta microstructure and texture influence the precipitation of alpha phase in the Ti17 titanium alloy, 17th International Conference on Texture (ICOTOM), August 24-29, 2014 Dresden Allemagne COM
  • Thierry GROSDIDIER, Nathalie GEY, Nathalie ALLAIN, ZOU JianXin, High current pulsed electron beam (HCPEB) surface microstructure modifications characterized by EBSD, 28th International Conference on Surface Modification Technologies June 16th - 18th, 2014, Tampere University of Technology, Tampere, Finland COM
  • K.E.K. Amouzou, T. Richeton, A. Roth, M.A. Lebyodkin, T.A. Lebedkina, S. Berbenni, Numerical study of anisotropy of mechanical properties of α-titanium in tension conditions, 13th International Symposium on Physics of Materials (ISPMA13), Prague, Czech Republic, August 31 – September 4, 2014. COM
  • T. Richeton, I. Tiba, S. Berbenni, Study of slip initiation at f.c.c. twin boundaries thanks to explicit analytical expression of incompatibility stresses, 13th International Symposium on Physics of Materials (ISPMA13), Prague, Czech Republic, August 31 – September 4, 2014. COM
  • T. Richeton, I. Tiba, S. Berbenni, O. Bouaziz, Rôle de l’élasticité anisotrope sur la promotion du glissement simple dans les plans de macle aux joints S3<111>, Conférence Matériaux, Montpellier, November 24-28, 2014. COM
  • T.A. Lebedkina, M.A. Lebyodkin, T.T. Lamark, M. Janecek, Y. Estrin, Effect of equal channel angular pressing on the Portevin-Le Chatelier effect in an Al3Mg alloy   International Congress NanoSPD6, Metz, France, June 30-July 4, 2014. COM
  • T.A. Lebedkina, M.A. Lebyodkin, T.T. Lamark, M. Janecek, Y. Estrin  Suppression of the Portevin-Le Chatelier effect and dynamics of deformation processes in an ultrafine grained AlMg alloy, Intern.Conf. ISPMA13, Sept. 2014, Prague, Czech Republic COM
  • F. KPEKY, H. BOUDAOUD, H. CHALAL, F. ABED-MERAIM, E.M. DAYA. “Dynamic response of viscoelastic multilayers structures using solid-shell finite elements.” XIXth Vibrations, SHoks and Noise, Aix-en-Provence-France: June 16-19, 2014. COM
  • G. CHATZIGEORGIOU, A. JAVILI, P. STEINMANN, Homogenization of Composites with Magneto-Mechanical Behavior, GAMM 2014, Erlangen, Germany, 10-14 March, 2014. COM
  • Laszlo S. Toth, Chengfan Gu, Mark Hoffman, Modeling of twinning/detwinning, the Bauchinger effect and residual stresses with the Taylor-Lin elasto-viscoplastic polycrystal model in low cycle fatigue of Mg alloy AZ31, 11th International Fatigue Congress, Melbourne, Australia, March 2-7, 2014, oral lecture. COM
  • P.-A. JUAN, S. BERBENNI, L. CAPOLUNGO. Quantitative study of the role of twin-parent and twin-twin interactions on the mechanical response of hexagonal materials. MMM 2014, 7th international Conference on Multiscale Materials Modeling October 6-10, Berkeley, California, USA, 2014. COM
  • S. BERBENNIV. TAUPINK.S. DJAKAC. FRESSENGEAS. Une approche numérique de type FFT pour le calcul des champs statiques de dislocations et de désinclinaisons généralisées. Congrès Matériaux 2014, Session 07, Montpellier, 24-28 Novembre, 2014 COM
  • R. DINGREVILLE, M. HALLIL, S. BERBENNI. Une méthode thermodynamique continue généralisée pour déterminer les contraintes superficielles cohérentes et incohérentes. Congrès Matériaux 2014, Session 07, Montpellier, 24-28 Novembre, 2014 COM
  • Y. ELHACHI, B. MALARD, S. BERVEILLER, J. WRIGHT, Synchrotron analysis of lattice rotations and internal stresses in hundred individual grains during stress-induced martensitic transformation in a polycrystalline CuAlBe: new opprtunities for the 3DXRD method, ICOMAT'14, Bilbao, Spain, 6-11 July, 2014 COM
  • V. Taupin, C. Fressengeas, L. Capolungo, M.V. Upadhyay, Mesoscale modeling of polycrystal plasticity with dislocation and disclination fields, Plasticity 2014, Freeport, Bahamas, 2014.  COM
  • C. Fressengeas, V. Taupin and L. Capolungo, an elastoplastic theory of dislocation and disclination fields, International Workshop on Dislocation Dynamics Simulations, Saclay, France, 2014.  COM
  • Soho K, Lemoine X, Abed-Meraim F, Zahrouni H. Influence of the loading path on the mechanical behavior of metallic materials. International conference on COmputational methods in Manufacturing Processes ICOMP’14,Saint-Etienne, 2-4 September 2014. COM
  • Soho K, Lemoine X, Abed-Meraim F, Zahrouni H. Influence du trajet de chargement sur la réponse mécanique d’un matériau métallique. Colloque Matériaux 2014, Montpellier, 24-28 Novembre 2014 COM
  • T. GROSDIDIER, Y. SAMIH, N. ALLAIN, T. CZERWIEC, C. DONG, Modification of Metallic Surfaces by Duplex Treatments involving Severe Shot Peening, Pulsed Electron Beam and Nitriding. 4th Chinese French Symposium on Advanced Materials (CFSAM-4), November 2014, Beihang University (China). COM
  • Shashkov I.V., Gornakov V.S., Lebyodkin (Lebedkin) M.A, Observation of power-law scaling behavior in ferromagnetic films with unidirectional anisotropy, Moscow International Symposium on Magnetism MISM-2014, 29 Juin-3 July 2014, Russia. COM
  • V. TAUPIN, C. FRESSENGEAS, L. Capolungo, Grain boundary modelling using a theory of disclination and dislocation fields, International workshop on dislocation dynamics simulations, Saclay, France, 2014. COM
  • M. Mondet, E. Barraud, S. Lemonnier, N. Allain, T. Grosdidier, Elaboration de composites base magnésium par frittage SPS, Matériaux 2014, Montpellier, 2014 COM
  • Laszlo S. Toth, Chengfan Gu, Arnaud Pougis, Mechanism of Continuous Dynamic Recrystallization During Severe Plastic Deformation, 5th Int. Conf. Recrystallization and Grain Growth, Sydney, 5-10 May, 2013, oral lecture. COM
  • I. Tiba, T. Richeton, S. Berbenni, C. Motz, H. Vehoff, Investigation of the deformation behavior of bicrystals: modeling and experiments, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2013), Sevilla, September 8-13, 2013. COM
  • T. Richeton, S. Berbenni, From bicrystals to spherical inclusions: analytical derivation of the stress fields in presence of plastic strain gradients, 3rd International Conference on Material Modelling (ICMM 3), Warsaw, Poland, September 8-11, 2013. COM
  • Jean-Marc RaulotJean-Sebastien Lecomte, Dislocation loops:mobility and interactions with the grain boundaries in titanium,  Conference Proceeding of The International Conference on Intergranular and Interphase Boundaries in Materials (iib2013), Halkidiki, Greece COM
  • M. SALIB, J. TEIXEIRA, L. GERMAIN, E. GAUTIER, N. GEY, Influence of the transformation temperature on the microtexture induced by alpha phase precipitation at beta/beta grain boundaries in a beta metastable titanium alloy, EUROMAT, Sevilla 8-13 2013 COM
  • Laszlo S. Toth, Chengfan Gu, Y. Estrin, C.H.J. Davis, R. Lapovok, Grain refinement modelling in large plastic deformation, The 19th International Symposium on Plasticity & Its Current Applications: Analytical, Computational, and Experimental Inelasticity in Deformable Solids, Editor: A.S. Khan, ISBN: 09659463-4-2, January 3-8, 2013, Nassau, Bahamas, pp. 28-30. COM
  • Laszlo S. Toth, Chengfan Gu, Arnaud Pougis, Grain refinement in severe plastic deformation as a process of dynamic recrystallization, THERMEC'2013, Processing & Manufacturing of Advanced Materials, Dec. 2-6, 2013, Las Vegas, USA, oral lecture COM
  • Laszlo S. Toth, Chengfan Gu, Arnaud Pougis, Mechanism of Continuous Dynamic Recrystallization During Severe Plastic Deformation, IX. Hungarian Materials Science Conference, Balatonkenese, Hungary, 13-15, Octobre, 2013, oral lecture. COM
  • S. BERBENNIV. TAUPINC. FRESSENGEAS. A FFT-based approach for solving elastic fields of continuum dislocation mechanics. 3rd International Conference on Materials Modeling (ICMM3-EMMC13), Session « Plasticity », Sept. 8-11, Warsaw, Poland, 2013. COM
  • S. BERBENNI,  L. CAPOLUNGO. Homogenization schemes for elastic-viscoplastic heterogeneous materials based on an “affine” extension of the “Translated Fields” method. 3rd International Conference on Materials Modeling (ICMM3-EMMC13), Session « Micromechanics and Homogenization », Sept. 8-11, Warsaw, Poland, 2013 COM
  • T. Hammad, M. Hattab, J-M. Fleureau. Internal friction angle variation in the mix-Kaolin/Montmorillonite clay and microstructural identification. Conference of the ASCE Engineering Mechanics Institute, USA, Chicago, 4 – 7 August, 2013 COM
  • R. PIQUARD, A. D'ACUNTO, D. DUDZINSKI, Caractérisation des bavures lors du micro-fraisage d’alliages de Nickel-Titane, Séminaire Manufacturing 21, Besançon , Février 2013 COM
  • I. Tiba, T. Richeton, S. Berbenni, Effects of grain boundaries on internal mechanical fields: discrete versus continuum approaches, 5th Saar-lor-lux Colloquium in Mechanics, Metz, April 20, 2012. COM
  • F. Wagner, A. Ayad, N. Rouag and A.D. Rollett  “An accelerated Potts model for grain growth – Application to IF steels”, workshop Texture andAnisotropy, 31 Mai-1er Juin, Caen, 2012 COM
  • T. Richeton, S. Berbenni, Elastic Fields in Bicrystals and Spherical Grains: Derivation of the Different Sources of Incompabilities (Elastic, Plastic and Elastic/Plastic), MMM 2012, 6th International Conference on Multiscale Materials Modeling, Singapore, October 27-31, 2012. COM
  • J. GUYON, E. BOUZY, A. HAZOTTE. Effect of mechanical milling of the initial powders on the sintering during the SPS process in a TiAl-based alloy, Gamma TiAl Alloy Technology 2012, June 5-9, 2012, Bejing, China COM
  • L. Germain, N. Gey, M. Humbert, 'Advanced orientation data analysis applied to transformation texture/microtexture studies', Modern Bainitic Steels Workshop - Paris, La Défense - May 16th 2012 COM
  • M. Bouchaour, N. Maloufi, G. Orsal, S. Gautier, A. Ould Abbas, N.E. Chabane Sari, A. Ougazzaden, A comparative study between BGaN Layers Grown on GaN/Al2o3 and AlN/Al2O3 by MOVPE, présentation orale, International Conference on Advanced Materials for Photonics, Sensing and Energy Conversion Applications, December 5-7, 2012, El Jadida Morocco COM
  • P.L. Bonanno, S. Gautier, Y. El Gmili, T. Moudakir, A.A. Sirenko, A.Kazimirov, Z.H. Cai, J. Martin, W.H. Goh, A Martinez, A. Ramdane, L. Le Gratiet, N. Maloufi, M.B. Assouar, A. Ougazzaden, Nondestructive mapping of chemical composition and structural qualities of group III-nitride nanowires using submicron beam synchrotron-based X-ray diffraction,présentation orale, Symposium W on Current Trends in Optical and X-Ray Metrology of Advanced Materials for Nanoscale Devices III / Spring Meeting of the European-Materials-Research-Society (E-MRS), Strasbourg, FRANCE Date: MAY 14-18, 2012 COM
  • V. Taupin, C. Fressengeas, A. Das, L. Capolungo, M. Upadhyay, Grain boundary modeling using a theory of disclination and dislocation fields, MMM 2012, Singapore, 2012.  COM
  • V. Taupin, C. Fressengeas, A. Das, L. Capolungo, M. Upadhyay, Grain boundary modeling using a theory of disclination and dislocation fields, Second Trilateral Worshop: “Generalized Continua as Models for Materials with Multi-Scale Effects or under Multi-Field Actions”, Lutherstadt Wittenberg, Germany, 2012. COM
  • Abed-Meraim F, Trinh VD, Combescure A. New quadratic solidshell elements and their evaluation on popular benchmark problems. 3rd European Seminar on Computing (ESCO 2012), Pilsen (Czech Republic), 25-29 June 2012. COM
  • T. Hammad, M. Hattab, J-M. Fleureau Compressibility of kaolin/montmorillonite clay mixtures and microstructural variations. Joint Conference of the Engineering Mechanics Institute (EMI2012). USA, Notre Dame 17-20 June, 2012. COM
  • T. Richeton, G.F. Wang, C. Fressengeas, Continuity constraints at interfaces and scale dependence of particle strengthening, ICMM 2, 2nd International Conference on Material Modelling, Paris, France, August 31 – September 2, 2011. COM
  • R. Storer, M. Lebyodkin, P. Kurath, A. Beaudoin, C. Fressengeas, Localized Deformation During Macroscopically Uniform Plastic Flow of a Dynamically Strain Aging Alloy, 2011 TMS Annual Meeting & Exhibition, Feb. 27 – March 03, 2011, San Diego, California, USA (accepted). COM
  • R. Storer, M. Lebyodkin (Lebedkin), P. Kurath, A. Beaudoin, C. Fressengeas, Localized Deformation During Macroscopically Uniform Plastic Flow of a Dynamically Strain Aging Alloy, 2011 TMS Annual Meeting & Exhibition, Feb. 27 – March 03, 2011, San Diego, California, USA COM
  • T. Richeton, G. Wang, C. Fressengeas, Continuity constraints at interfaces and particle strengthening, PLASTICITY 2011, 17th International Symposium on Plasticity, Puerto Vallarta, Mexico, January 3-8, 2011. COM
  • C. Fressengeas, T. Richeton, G. Wang, Continuity constraints at interfaces and scale dependence of the mechanical behavior of crystalline materials, TMS Annual Meeting & Exhibition, San Diego, California, February 27 - March 3, 2011. COM
  • L.S. Toh, C.F. Gu, Modeling results for grain refinement in severe plastic deformation, Int. Conf. Bulk Nanostructured Mater., BNM 2011, UFA, August 23-27 (2011), oral lecture COM
  • M.A. Lebyodkin, N.P. Kobelev, Y. Bougherira, D. Entemeyer, C. Fressengeas, T.A. Lebedkina, I.V. Shashkov, Invariance d’échelles associée à l’instabilité plastique et à l’écoulement homogène, Colloque Plasticité, Lille, France, 4-6 Avril 2011 COM
  • W. Elmay, E. Patoor, B. Bolle, T. Gloriant, F. Prima, A. Eberhardt, P. Laheurte, Modification par traitements thermo-mécaniques des propriétés élastiques d’alliages binaires Ti-Nb pour les applications biomédicales, Le 20ème Congres Français De Mécanique, 28 aout-2 septembre (2011), Besançon –France. COM
  • I.V. Shashkov, M.A. Lebyodkin, T.A. Lebedkina, P. Dobron, F. Chmelik, R. Kral, K. Parfenenko, K.Mathis, Acoustic−emission study of the intermittency of plastic flow associated with twinning and dislocation glide in Mg and Al based alloys, 12th Intern. Symp. on Physics of Mater., Prague, 4-9 sept. 2011 COM
  • C. Schuman , L. Bao, J.S. Lecomte, M.J. Philippe , Y. Zhang , X. Zhao , L. Zuo , J.M. Raulot and C.Esling., Model for twin-variant selection in Titanium Alloys, Ti – 2011, Beijing COM
  • L. Bao, C. Schuman, J.S. Lecomte, M.J. Philippe, X.A. Zhao, L.A. Zuo, C. Esling, Comparison of twin with multiple variants systems and twins with predominant twin system by ebsd measurements on split sample, Ti – 2011, Beijing COM
  • C. Schuman , L. Bao, J.S. Lecomte, M.J. Philippe , Y. Zhang , X. Zhao , L. Zuo , J.M. Raulot and C.Esling, New model for twin variant selection in hexagonal alloys, ICOTOM 16, Bombay, 2011 COM
  • A. Pougis, J.J. Fundenberger, R. Arruffat, L.S. Toth, M. Arzaghi, O. Bouaziz, D. Barbier, L. Faure, A new SPD process for tubes: High Pressure Tube Twisting (HPTT) - Modelling and first experiments, Int. Conf. Bulk Nanostructured Mater., BNM 2011, UFA, August 23-27, oral lecture. COM
  • P. Blaineau, N. Gey, L. Germain, M. Humbert, Restitution of the parent microtexture from the inherited microtexture measured by EBSD. An application to low alloyed steels, EBSD Conference - 28th - 30th March 2011, Düsseldorf, Germany COM
  • C. Buirette; N. Gey; J. Huez; E. Andrieu; G. Khelifati, Analysis of deformation mechanisms in the ti-6al-4v titanium alloy after charpy tests through the EBSD technique, EBSD Conference - 28th - 30th March 2011, Düsseldorf, Germany - Poster COM
  • J. Ruiz-Vargas, N. Siredey, N. Gey, P. Bocher, M. Wary, A. Hazotte, Study of the isothermal brazing junctions of Nickel-based superalloys. Chemical quantification of Boron inside borides - Euromat 2011 Montpellier COM
  • L.S. Toth, C.F. Gu, Modeling results for grain refinement in severe plastic deformation, Int. Conf. Bulk Nanostructured Mater., BNM 2011, UFA, August 23-27, oral lecture COM
  • V. TAUPIN, S. BERBENNI, C. FRESSENGEAS. Size effects on the hardening of channel-type microstructures: a Field Dislocation Mechanics-based approach. Proceedings of 2nd International Conference on Material Modelling (ICMM2), Ecole des Mines, Paris, France, Aug. 31- Sept. 2, 2011 COM
  • S. BERBENNI. Role of discrete intra-granular slip on lattice rotations in polycrystalline metals. Lecture in the honor of the carreer of Prof. Marcel Berveiller. Int. Symp. on Plasticity “PLASTICITY 2011”, Puerto Vallarta, Mexico, January 3-8, 2011 COM
  • G. ALTMEYER, F. ABED-MERAIM, T. BALAN. Formability prediction of damageable elastic-viscoplastic media by a material stability analysis based on a linear perturbation method. IV ECCM Conference, 16-21 Mai (Paris) 2010. COM
  • T. CARVALHO RESENDE, T. BALAN, F. ABED-MERAIM, S. BOUVIER, SS. SABLIN. Application of a dislocation based model for Interstitial Free (IF) steels to Marciniak Stretch test simulations. IV ECCM Conference, 16-21 Mai (Paris) 2010. COM
  • B. Beausir, C. Fressengeas, N.P. Gurao, L.S. Toth and S. Suwas, Continuity constraints and spatial correlations on interfaces in crystal plasticity, IVth European Conference on Computational Mechanics-ECCM IV, Solids, Structures and Coupled Problems in Engineering, ECCOMAS, Paris, May 16-21, 2010. COM
  • R. MAKKOUK, X. LEMOINE, M. TEACA, I. CHARPENTIER, M. MARTINY, G. FERRON, A Mixed Experimental-Numerical Approach to Sheet-Metal Plastic Modeling, with Application to the Prediction of the Forming Limit Curves, ESAFORM 2010, Brescia, Italy, 7-9 avril 2010. COM
  • V. Taupin, T. Richeton, S. Berbenni, C. Fressengeas, Continuity constraints and incompatibility stresses at grain boundaries, ICACM 2010, Scale transition for plastic crystalline and microstructured materials: from experiment to numerical modelling, International Conference for Applied Computational Mechanics, Paris, June 2-4, 2010. COM
  • M.A. Lebyodkin, Y. Bougherira, N.P. Kobelev, T.A. Lebedkina, D. Entemeyer, C. Fressengeas, I. Shashkov, Experimental study of dislocation avalanches during unstable plastic deformation, 11th Intern. Conf. « Experimental Chaos and Complexity », ECC11, Juin 2010, Lille, France. COM
  • J.A. Rodriguez-Martinez, A. Rusinek, R. Pesci, A. Arias, Mechanical characterization and analytical modeling of the thermo-viscoplastic behaviour AISI 304 steel under wide ranges of strain rates at room temperature, 37th Solid Mechanics Conference (SolMech 2010), Warsaw (Poland). COM
  • E. Patoor, Y. Chemisky, A. Duval, B. Piotrowski, T. Ben Zineb, 3-D Macroscopic modelling of SMA behavior. Application for structure analysis, precipitation effects in SMA and NiTiNb behavior, Workshop on Shape Memory Alloys, KOC University, Istanbul 2010. COM
  • E. Patoor, Y. Chemisky, A. Duval, B. Piotrowski, T. Ben Zineb, 3-D Macroscopic modelling of SMA behavior. Application for structure analysis, precipitation effects in SMA and NiTiNb behavior, Workshop on Shape Memory Alloys, KOC University, Istanbul 2010. COM
  • J. Chevy, C. Fressengeas, M. Lebyodkin (Lebedkin), V. Taupin, P. Bastie, P. Duval, Short Range and Long Range Spatial Correlation Effects on Dislocation Distributions, 2010 TMS Annual Meeting & Exhibition, The Vasek Vitek Honorary Symposium on Crystal Defects, Computational Materials Science and Applications, 14-18 February 2010, Seattle, USA COM
  • N. Jacques, C. Czarnota, S. Mercier, A. Molinari. Validation d'un modèle micromécanique pour l'endommagement ductile sous chargements dynamiques intenses, Matériaux 2010, Nantes, France, 18-22 octobre 2010 COM
  • L.S. Toth, B. Beausir, D. Orlov, R. Lapovok, A. Haldar, Analysis of texture and R value variations in asymmetric rolling of IF steel, IFSTEEL-2010 Conference, Jamshedpur, India, Febr. 15-17, 2010, keynote lecture. COM
  • J. TEIXEIRA, L. GERMAIN, E. LAMIELLE, N. GEY, E. AEBY-GAUTIER, “Heterogeneous precipitation of the alpha phase on beta/beta grain boundaries in the beta metastable Ti17 titanium alloy: experimental study of the associated kinetics, morphology and microtexture,” presented at the PTM2010 Solid-Solid Phase Transformations in Inorganic Materials, Palais des Papes, Avignon, France, 2010. COM
  • B. Erzar, P. FORQUIN, Experimental approach and mesoscopic modelling of a concrete subjected to impact, DYMAT symposium 2010, Guéthary, France COM
  • X. Soldani, A.M. Sánchez, H. Miguélez, A. Molinari, Numerical modeling of segmentation in orthogonal cutting of aero – engine alloys, Workshop “Constitutive modelling in applications for industrial processes”, Krakow (Poland), 1-3 September, 2010 COM
  • S. Berbenni, M. Berveiller, H. Vehoff, C. Collard, C. Perrin, Internal length scale effects on the local and overall behaviors of polycrystals. 5th Int. Conf. Multiscale Materials Modeling MMM2010 (Symposium : Micromechanics), Freiburg, Germany, Oct.4-8, 2010 COM
  •  Y. SAMIHB. BOLLEN. ALLAIN-BONASSO, S. Z. HAO, M CHEMKHI, D. RETRAINT, C. DONG, T. GROSDIDIER,Textures et contraintes internes induites par le procédé HCPEB (High Current Pulsed Electron Beam) combiné avec le traitement SMAT (Surface Mechanical Attrition Treatment). Journées de la Matière Condensée JMC12, August 2010, Troyes (France). COM
  • F. Nicot, L. Sibille, A. Daouadji, P.-Y. Hicher, F. Darve, Multiscale modeling of instability in granular materials. Engineering Mechanics Institute 2010 (EMI 2010), USC Los Angeles, USA, 2010. COM
  • J. Chevy, C. Fressengeas, M. Lebyodkin (Lebedkin), P. Bastie, P. Duval, On the role of short-range vs. long-range spatial correlations in dislocation patterning, Fifth Intern. Conf. Multiscale Materials Modeling MMM2010, October 4-8, 2010, Freiburg, Germany. COM
  • G. ROBIN, F. VANDER MEULEN, N. WILKIE-CHANCELLIER, L. MARTINEZ, L. HAUMESSER, J. FORTINEAU, P. GRIESMAR, G. FEUILLARD, Détermination du temps de gel par mesures de la vitesse de phase et de l'atténuation d'une onde ultrasonore, 10ème Congrés Français d'Acoustique, Lyon, 12-16 avril, 2010. COM
  • P. Blaineau, L. Germain, N. Gey, M. Humbert, 'Calculation of high temperature parent orientation maps - Application to low carbon steels', International Conference on Advanced Method in EBSD 2010, 5-6 Mai 2010, Saint Etienne, France COM
  • R. OOUAHAB, R. PESCI, S. BERVEILLER, E. PATOOR, Détermination des critères de rupture locaux dans les aciers bainitiques - application à l'acier 16MND5, Matériaux 2010, Nantes, 18-22 octobre, 2010 COM
  • N. MALOUFI, S. GRIRA, G. HOFER, B. BOLLE, N. GEY, B. DOUINE, C. BELLOUARD, J. LEVEQUE, G. ORSAL, C. ESLING, Electron Backscatter Diffraction technique: microstructure and epitaxial relationships in YBa2Cu3O7-d/CeO2/sapphire films, , november 17-20 , 2009 - Nancy (France), Conference on Innovations in Thin Film Processing and Characterisation ITFPC. COM
  • G. ORSAL, T. MOUDAKIR, S. GAUTIER, N. MALOUFI, D. J. ROGERS, F. HOSSEINI TEHERANI, F. JOMARD, P. L. VOSS AND A. OUGAZZADEN, Demonstration of single crystal InGaN MOVPE growth on ZnO-buffered silicon template substrate, presented at the EMRS spring meeting 2009, Strasbourg, France, EMRS spring meeting. COM
  • T. Carvalho Resende, S. Bouvier, T. Balan, F. Abed-Meraim, S.S. Sablin. Work hardening prediction using a dislocation based model for automotive Interstitial Free (IF) steels, 1st ICMM, Dortmund (Germany), 15-17 Septembre 2009. COM
  • C. Fressengeas, A.J. Beaudoin, D. Entemeyer, T. Lebedkina, M. Lebyodkin, V. Taupin, Dislocation transport in crystal plasticity, 1st Int. Conf. on Material Modelling, Dortmund, Germany, 15-17 September 2009. COM
  • N. Granier, S. Mercier, A. Molinari, F. Llorca, T. Grunenwald, Multiple necking in expansions of hemispheres, Workshop dynamic behavior of materials, Metz, France, 13-15 May 2009. COM
  • N. Granier, S. Mercier, A. Molinari, F. Llorca, T. Grunenwald, Multiple necking in dynamic expansions of spheres : theory and experiments, IUTAM symposium on dynamic fracture and fragmentation, Austin, 8-12 mars 2009. COM
  • N. Jacques, C. Czarnota, S. Mercier, A. Molinari, A micromechanical constitutive model for dynamic damage and fracture of ductile materials, IUTAM symposium on dynamic fracture and fragmentation, Austin, 8-12 mars 2009. COM
  • E. Patoor, Simulation numérique du comportement des alliages à mémoire de forme et des céramiques piézoélectriques, Journée Thématique Matériaux et Structures Intelligentes Appliques aux Contrôle Santé Intégré, Contrôle de Formes, Contrôle de Vibrations et Biomimétisme, ONERA Chatillon, 25 Mars 2009. COM
  • S. PHILIPPON, P. CHEVRIER, A. RUSINEK, O. SINOT, A. LEFEBVRE, P. LIPINSKI, P. VIEVILLE, L. FAURE, Etudes Expérimentales d'Interaction aux grandes vitesses: Application au Frottement de Glissement Sec, MECADYMAT 1 & 2 Avril 2009 - Bourges. COM
  • N. Siredey-Schwaller, A. Eberhardt, E. Patoor, P. Bastie,. Relation between crystal quality and fatigue life of a Cu-Al-Be single crystal shape memory alloy under repeated bending, ESOMAT 09, Sept 7-11, 2009, Prague. COM
  • P. LAHEURTE, W. ELMAY, A. EBERHARDT, T. GLORIANT, F. PRIMA, E. Patoor, Development of nickel-free shape memory alloys for biomedical applications, 2009 Joint ASCE-ASME-SES Conference on Mechanics of Materials, Blacksburg, VA, USA Conference Symposium on Shape Memory Alloys, June 24-27, 2009. COM
  • F. Prima, B. Dailey, P. Laheurte, A. Eberhardt,, T. Gloriant, P. Vermaut, R. Portier Development of Ti-based alloys with tuneable elastic properties for biomedical applications: Some exemples of strategies 27th Canadian Biomaterials Society Annual Conference, Quebec City, Laval University Campus Canada, May 20-23, 2009. COM
  • S. Berbenni, T. Richeton, C. Collard, C. Perrin, M. Berveiller, Role of discrete intra-granular slip heterogeneities on mechanical fields and overall behavior of polycrystals, ICMM 1, 1st International Conference on Material Modelling, Dortmund, Germany, September 15-17, 2009. COM
  • T.Böhlke, G. Bondar, Y.Estrin, M.A.Lebyodkin (Lebedkin), Geometrically Non-Linear Modeling of the Portevin Le Chatelier Effect, Complas X, X Intern. Conf. on Comput. Plasticity, Fundamentals and Applications, Barcelona, Spain, 2-4 September 2009 COM
  • D. DUDZINSKI, Usinage à Grande Vitesse, Colloque MecaFuture09, Matéralia, Charleville-Mézières, Novembre 2009 COM
  • J.Wu, N. Allain-Bonasso, S. Hao, T. Grosdidier, C. Dong, Multilayer Structures on ZrAlNiCu Bulk Metallic Glasses Induced by Pulsed Electron Beam Surface Treatments, Conférence Workshop WPI-INPG-Europe, 25-28 août 2009, Grenoble, France. COM
  • N. Nicaise, S. Berbenni, F. Wagner, M. Berveiller, X. Lemoine, Combined effects of crystallographic and grain sizes heterogeneities on plasticity and ductility of polycrystalline IF steels.  4th Int. Conf. Multiscale Materials Modeling MMM2008 (Symposium 3: Multiscale Mechanics), Tallahassee, Florida, USA, Oct. 27-31, 2008. COM
  • A. Daouadji, Bifurcation phenomena in granular material: Experimental and numerical simulation of static liquefaction on sands, Third Saar Lor Lux Colloquium in Mechanics (SLLCM3), Esch sur Alzette, Luxembourg, 2008 COM
  • C.S. Chang, P-Y. Hicher, A. Daouadji, Instability of granular soils at constitutive level, 8th International Workshop on Bifurcations and Degradations in Geomaterials, Lake Louise, Alberta, Canada, 2008. COM
  • C. Collard, V. Favier, S. Berbenni, M. Berveiller, Modeling Grain Size Effect through Discrete Periodic Inelastic Slip Mechanisms. 14th Int. Symp. on Plasticity "PLASTICITY 2008", Kailua/Kona, Hawaii, January 3-8, 2008. COM
  • A. Daouadji, Bifurcation phenomena in granular material: Experimental and numerical simulation of static liquefaction on sands, Third Saar Lor Lux Colloquium in Mechanics (SLLCM3), Esch sur Alzette, Luxembourg, 2008. COM
  • A. Daouadji, P-Y. Hicher, Modelling undrained behaviour of granular materials at high stresses, Inaugural International Conference of the Engineering Mechanics Institute (EM08)- ACSE- Minneapolis, Minnesota, 2008. COM
  • N. Granier, F. Llorca, S. Mercier, A. Molinari, Multiple necking under dynamic expansions of a copper hemisphere, 14th international symposium on plasticity, Hawaii, janvier 2008. COM
  • A. Hasani, L.S. Toth, Texture modelling in equal channel angular extrusion using a general flow line function, Int. Conf. Textures of Materials ICOTOM15, Pittsburgh, June 1-6, 2008. COM
  • F. Jemal-Ellouze, T. Bouraoui, T. Ben Zineb, C. Bradai, E. Patoor, A thermomechanical constitutive law for Fe-based shape memory alloys: Effect of martensitic transfpormation, plastic gliding and their interactions, International Conference on Smart Materials and Adaptive Structures: Mathematical Modeling and Computation, Tangier, Morocco, April 14 - 16, 2008. COM
  • F. Laouafa, A. Daouadji, F. Darve, Experimental and numerical modelling of diffuse mode of failure in very loose sands, 8th International Workshop on Bifurcations and Degradations in Geomaterials, Lake Louise, Alberta, Canada, 2008. COM
  • S. Mercier, A. Molinari, Y. Estrin, Homogenization of elastic-viscoplastic heterogeneous materials: Application to nanomaterials, EMRS08, Varsaw, 17-21 septembre 2008. COM
  • E. Patoor, A. Eberhardt, F. Meraghni, Y. Payandeh, Y. Chemisky, Shape Memory Alloy Composites: Modelling and Experiemnts, SES Technical Meeting 2009, Urbana-Champaign, Illinois, USA, October 12-15, 2008. COM
  • E. Patoor, B. Malard, S. Berveiller, Multiscale Analysis of Stress-Induced Martensitic Transformation in Cu-Al-Be SMA, ASME Conference on Smart materials, Adaptive Structures and Intelligent Systems (SMASIS), Ellicott City, Maryland, USA, October 28-30, 2008. COM
  • B. Piotrowski, T. Ben Zineb, E. Patoor, Modelling of SMA with elastic-plastic inclusions, Workshop, Modelling of SMAs and SMA Actuated Structure, ESF EUROCORES programme Smart Structural Systems Technologies (S3T), Prague, Czech Republic, May 4-7, 2008. COM
  • T. Richeton, S. Berbenni, M. Berveiller, Intra-granular plastic slip heterogeneities: Discrete vs. Mean field approaches, PLASTICITY 2008, 14th International Symposium on Plasticity, Kailua/Kona, Hawaii, January 3-8, 2008. COM
  • V. Taupin, S. Varadhan, C. Fressengeas, A.J. Beaudoin, Polarized dislocation structures and directionality of yield point in strain-aged steels, Multiscale Materials Modeling IV, Tallahassee, Florida, USA, October 27-31, 2008. COM
  • N. MALOUFI, G. ORSAL, G. SIMON, T. MOUDAKIR, A. MARC, B. MAMA, S. ALI, AND A. OUGAZZADEN, MOVPE growth of BGaN as barrier layer for threading dislocations, presented at the International Workshop on Nitride semiconductors, October 6-10, Montreux-Switzerland (2008) COM
  • A. Daouadji, P. - Y. Hicher, Modelling undrained behaviour of granular materials at high stresses, Inaugural International Conference of the Engineering Mechanics Institute (EM08)- ACSE- Minneapolis, Minnesota, 2008 COM
  • A. Daouadji, H. Al Gali, M. Jrad, F. Darve, Loss of stability versus loss of controllability in granular materials, ALERT Workshop, Aussois, France, 2008. COM
  • A. Abbadi1, J. Capelle2, J. Gilgert2, D. Meziani2,Damage of honeycomb composite materials under different solicitation: static, fatigue and dynamicZ. Azari (2018) AFF
  • H. MANSOUR, M.A. CRIMP, N. GEY, J. GUYON, N. MALOUFI, Characterization of a low-angle grain boundary using Accurate Electron Channeling Contrast Imaging, Electron Backscatter Diffraction Meeting 2015, March 30-31 2015, Glasgow, UK AFF
  • L. Weiss, P. Acquier, L. Germain, D. Boisselier and E. FleuryMicrotexture de Ti-6AL-4V développée lors d'une fabrication par dépôt de poudre fondue par laser, Congrès SF2M, Paris, France, 18-19 novembre, 2015 AFF
  • V. Taupin, C. Fressengeas, L. Capolungo, M.V. Upadhyay, Mesoscale modeling of polycrystal plasticity with dislocation and disclination fields, Plasticité 2015, Autrans, France, 2015.  AFF
  • T. Richeton, I. Tiba, S. Berbenni, Etude de l’initiation du glissement aux joints de macle S3<111> grâce à des expressions analytiques explicites des contraintes d’incompatibilité, Colloque Plasticité, Lyon, April 28-30, 2014. AFF
  • S. BERBENNIV. TAUPINK. S. DJAKAC. FRESSENGEAS. A numerical spectral approach for solving elasto-static field dislocation and g- disclination mechanics. MMM 2014, 7th international Conference on Multiscale Materials Modeling, October 6-10, Berkeley, California, USA, 2014 AFF
  • V. Taupin, C. Fressengeas, L. Capolungo, M.V. Upadhyay, Mesoscale modeling of polycrystal plasticity with dislocation and disclination fields, Plasticité 2014, Lyon, France, 2014. AFF
  • V. Taupin, C. Fressengeas, L. Capolungo, M.V. Upadhyay, Mesoscale modeling of polycrystal plasticity with dislocation and disclination fields, MMM2014, Berkeley, USA, 2014 AFF
  • T.A. Lebedkina, M.A. Lebyodkin, T.T. Lamark, M. Janecek, Y. Estrin, Effect of ECAP on plastic instability in an Al3Mg alloy, Colloque Plasticité 2014, 28-30 Avril 2014, Vileurbanne, France. AFF
  • M.A. Lebyodkin, N.P. Kobelev, T.A. Lebedkina, What is missing in the local criteria for onset of the Portevin-Le Chatelier effect? Book of abstracts, Colloque Plasticité 2013, Paris, France, 17-19 Avril 2013, p. 58. AFF
  • T. Richeton, S. Berbenni, Des bi-cristaux aux inclusions sphériques : contraintes internes en présence de gradients de déformation plastique, Colloque Plasticité, Paris, April 17-19, 2013. AFF
  • A. Roth, M.A. Lebyodkin, T.A. Lebedkina, T. Richeton, S. Allain, Instabilité plastique dans les aciers TWIP : propagation des bandes de déformation, intermittence et déformation critique, Livre de résumés, Colloque Plasticité 2012, Metz, France, 11-13 Avril 2012, p. 77. AFF
  • I.V. Shashkov, T.A. Lebedkina, M.A. Lebyodkin, Etude multi-échelles de l’intermittence de la déformation plastique par la méthode de l’émission acoustique, Livre de résumés, Colloque Plasticité 2012, Metz, France, 11-13 Avril 2012, p. 78. AFF
  • I. Tiba, T. Richeton, S. Berbenni, Effets des hétérogénéités élastiques et plastiques dans les bi-cristaux : Champs de dislocations continus et discrets, Colloque Plasticité, Metz, April 11-13, 2012. AFF
  • S. BERBENNI, B. PALIWAL, M. CHERKAOUI, Modélisation micromécanique de la migration de joint de grains couplée à une déformation de cisaillement (poster). Colloque National PLASTICITÉ, Metz, 11-13 Avril, 2012. AFF
  • V. TAUPIN, R. PESCI, S. BERBENNI, S. BERVEILLER, R. OUAHAB, O. BOUAZIZ. Lattice strain measurements using Synchrotron diffraction to calibrate a micromechanical modeling in a ferrite-cementite steel (poster).  Colloque National PLASTICITÉ, Metz, 11-13 Avril, 2012. AFF
  • V. Taupin, C. Fressengeas, A. Das, L. Capolungo, M. Upadhyay, Grain boundary modeling using a theory of disclination and dislocation fields, Plasticité 2012, Metz, France, 2012. AFF
  • T. Richeton, G.F. Wang, C. Fressengeas, Conséquences des conditions de continuité aux interfaces sur l’écrouissage des composites à matrice métallique, Colloque Plasticité, Lille, April 4-6, 2011. AFF
  • I.V. Shashkov, M.A. Lebyodkin, T.A. Lebedkina, P. Dobron, F. Chmelik, R. Kral, K. Parfenenko, K. Mathis, Effet de superposition d’événements sur la statistique de l’émission acoustique pendant la déformation plastique, Colloque Plasticité, Lille, France, 4-6 Avril 2011 AFF
  • W. Elmay, T. Gloriant, F. Prima, B. Bolle, N. Gey, E.Patoor, P. Laheurte, A thermomechanical treatment to improve superelasticity and low modulus of Ti-Nb alloys for biomedical applications, The 12th World Conference on Titanium (Ti2011), obtient “Premier Prix du Poster ‘’ 19-25 Juin (2011), Pekin- Chine. AFF
  • J. GUYON, E. BOUZY, A. HAZOTTE. Effect of milling on Spark Plasma Sintering in TiAl Alloys, EUROMAT 2011, Sept 12-15, 2011, Montpellier, France AFF
  • R.Ouahab, R. Pesci, S. Berveiller, E. Patoor, Détermination de critères de rupture locaux dans les aciers bainitiques - Application à l'acier 16MND5. Conférence MECAMAT 2010, Aussois, 11-15 janvier 2010 AFF
  • P. Laheurte, A. Eberhardt, F. Prima, T. Gloriant, M. Vary, D. Laillé, E. Patoor, Développement d’alliages de titane à très bas module pour applications biomédicales, Congrès Matériaux, Nantes, oct, 2010. AFF
  • R.Ouahab, R. Pesci, S. Berveiller, E. Patoor, Détermination de critères de rupture locaux dans les aciers bainitiques - Application à l'acier 16MND5, Conférence MECAMAT 2010, Aussois, 11-15 janvier 2010. AFF
  • P. Laheurte, A. Eberhardt, F. Prima, E. Patoor, T. Gloriant, M. Vary, D. Laillé, Développement d’alliages de titane à très bas module pour applications biomédicales, colloque Matériaux de Nantes 2010. AFF
  • S. GRIRA, N. MALOUFI, B. BOLLE, N. GEY, C. BELLOUARD, G. HOFER, C. ESLING, XRD and EBSD determination of the microstructure, the texture and the epitaxial relationships of YBa2Cu3O7-d/CeO2/sapphire, Strasbourg (France), June 8 to 12, 2009, E-MRS 2009 Spring Meeting. AFF
  • Y. Bougherira, D. Entemeyer, C. Fressengeas, N. Kobelev, T. Lebedkina, M. Lebyodkin, Etude expérimentale des avalanches de dislocations pendant l'effet Portevin-Le Chatelier, Colloque Plasticité, Marseille, 15-17 Juin 2009. AFF
  • P. Laheurte, A. Eberhardt, F. Prima, M. Wary, T. Gloriant, S. BerVeilLer, E. Patoor, Development and characterization of Ti-based alloys with mechanical properties for biomedical applications, ESOMAT (Sept. 2009) Prague. AFF
  • B. Piotrowski, T. Ben Zineb, E. Patoor, A. Eberhardt, Analysis of the effect of Niobium precipitates on the thermo-mechanical behavior of a NiTiNb Shape Memory Alloy, and modeling, ESOMAT (Sept. 2009) 2009. AFF
  • B. Piotrowski, A. Duval, T. Ben Zineb, Y. Chemisky, A. Eberhardt, E. Patoor, Modélisation d'un alliage à mémoire de forme contenant des précipités élasto-plastiques, colloque national MECAMAT 2009. AFF
  • M. Wary, W. El May, P. Laheurte, S. Berveiller, E. Patoor, A. Eberhardt, T. Gloriant, F. Prima, Contribution to the development of new biocompatible alloys with low modulus, 8th European Symposium on Martensitic Transformation, Prague, Czech Republic, September 7 - 11, 2009. AFF
  • M. Wary, W. ELMAY, P. Laheurte, S. Berweiler, A. Eberhardt, T. Gloriant, F. Prima , E. Patoor, Contribution to the development of new biocompatible alloys with low modulus, the 8th European Symposium on Martensitic Transformations ESOMAT 7-11 September (2009) Prague, Czech Republic. AFF
  • N. Maloufi, S. Grira, G. Hofer, B. Bolle, N. Gey, B. Douine, C. Bellouard, J. Leveque, C. Esling, Electron Backscatter Diffraction technique: microstructure and epitaxial relationships in YBa2Cu3O7-d/CeO2/sapphire films, Conference on Innovations in Thin Film Processing and Characterisation ITFPC,  november 2009 - Nancy (France) AFF
  • D. Entemeyer, C. Fressengeas, T. Lebedkina, M. Lebyodkin, V. Taupin, Transport des dislocations et plasticité cristalline, Colloque Plasticité, Nancy, 10-12 Mars 2008. AFF
  • S. BERBENNI,   A new internal variables homogenization scheme for linear viscoelastic materials based on an exact Eshelby interaction law. Workshop Research in Mechanics of Composites, Bad Herrenalb, Allemagne, December 11-12, 2014 AP
  • S. BERBENNI, FFT calculations for dislocations and g-disclinations. Potential applications to grain boundaries and twin tips. MAI SN Workshop EDF « Behavior of metallic materials used in the nuclear field: from microstructures to structural integrity », EDF Les Renardières, November 12-13, 2014. AP
  • E. Patoor, How to bridge the scales? Application to SMA-based structure, Guadalupe River Retreat, New Braunsweld, Texas, 23 août 2010. AP
  • C. Caër, J.S. Lecomte, S. Berbenni and E. Patoor, Size effect in SMAs, Characterization and micromechanics, SMA behaviour modelling seminar, Lac de la Madine, 19-21 décembre 2010. AP
  • B. Piotrowski, T. Ben Zineb, E. Patoor and A. Eberhardt, Modeling of NiTiNb SMA composite behaviour, SMA behaviour modelling seminar, Lac de la Madine, 19-21 décembre 2010. AP
  • Y. Payandeh, F. Meraghni, A. Eberhardt, E. Patoor, Influence of martensitic transformation on mechanical behavior of NiTi/epoxy smart composite, SMA behaviour modelling seminar, Lac de la Madine, 19-21 décembre 2010. AP
  • T. Ara, B. Piotrowski, C. Bouby, T. Ben Zineb, E. Patoor, Effect of plasticity on the martensitic transformation properties for NiTi SMA, SMA behaviour modelling seminar, Lac de la Madine, 19-21 décembre 2010. AP
  • C.ESLING Co-organisateur de la session 1 : Magnetic Functional Materials; Crystallography, phase transformation and properties: Ab initio simulation au Colloque “ The 4th International Workshop on Materials Analysis and Processing in Magnetic Fields MAP4 Atlanta Georgia, May 10-12,2